Miva Merchant Modules and Applications Search

Search for Wholesale Pricing - Miva Merchant Modules and Applications in Our Directory

Advanced Search

Miva Merchant Modules ť Searching For 'Wholesale Pricing'

Found 53 Modules or Applications that might fit the bill

Use caution when considering any modules from modStop. Their support has been reported by umpteen Miva Merchant users as suspect and worse. Some of their modules are simple and shouldn't require support. Please contact us with any questions concerning them or their modules.

1 Wholesale Pricing Interactive Design Solutions / Miva Central

Wholesale Pricing

Pre-Docs Sale......

Your client can login and get the price you've negotiated or assigned to them. You can have unlimited amount of price lists.

EXAMPLE: Client A can get Product A for $99.95. Client B can get Product A for $109.95 while the customer that hasn't negotiated with you and logs in, or not, gets the default price of Product A at $129.95.

Requirements: MM 4.14 or greater / OpenUI / ftp access to your stores mivadata folder.

Pre-Documentation

Benefits of the module:

Your client can login and get the price you've negotiated or assigned to them. You can have unlimited amount of price lists. In other words: Client A can get Product A for $99.95. Client B can get Product A for $109.95 while the customer that hasn't negotiated with you and logs in, or not, gets the default price of Product A at $129.95.

How module works:

Admin:

During install, the module creates example files, customer.dat and pricelist.dat. The Admin or store operator edits these files and places them back in the IDS_WHOLESALE folder -- probably via FTP. You add Customer logins and a price list filename to the customer.dat file. The customer.dat filename is assigned in the System admin. Also, the filename doesn't have to be customer.dat. On Linux/Unix(and maybe some Winserver configs), you will need to beware of case in the filenames. We suggest to keep lowercase filenames.

The pricelist.dat is the referenced file that stores the prices of any or all the products available to this list. There can be more than one list -- as many as you need. The customer.dat points the specific user to a a specific list. The list stores specific prices to specific products.There is no calculation in terms of percentages, etc.

End User:

When your customer/client logs in, they will see the product price display based on the assigned list. If the user is in the customer.dat file with an assigned pricelist filename, product price will be from the price list instead of the MM product database. If a product is NOT in the assigned list, the products displayed price will be the default from the stores product database. If the user isn't in your customer.dat, they will only see default pricing from the stores products database.

+++++++++++++++++++++++++++++++++++++++

File format and details

The "example" customer.dat.

Does not have to be named customer.dat. Requires 1 user per line

Users login | Assigned pricelist

onlineuser1|ballcaps

onlineuser2|shoes

The "example" pricelist.dat file

pricelist_filename|product_code|price

pricelist|prcodeA|99.95

A different price list file: with the same product

pricelist_filename|product_code|price

pricelist2|prcodeA|109.95

++++++++++++++++++++++++++++++++++++++++++

Other 3rd Party Display Systems

Some 3rd party systems will take over the display of certain elements of the MM/OpenUI screen. Most will allow you to place OpenTokens. The variable available to use in an OpenToken to display the price lists price is: g.OUIX_formatted_adjusted_price.

Example: %VAR(g.OUIX_formatted_adjusted_price)%.

In the case of VC Cat templates, You would place this where ever in the template you would place the default product price token.

Price: $144.95 Upgrade Cost: $0 Upgrade Terms (If Any): N/A
Compatibility: OpenUI Versions: 4.14-4.24x (Available Compiled)
Other Module Compatibility: N/A

From: Discount Modules
Relevance: 99.99%%

Rating: (0) Votes: (0) Hits: (1044) Reviews:
Rate It - Review It - Modify It - Report It

Bookmark Wholesale Pricing <-- Just click this link and then add to your favorites!

2 Wholesale Pricing DT Interactive Design Solutions / Miva Central

Your client can login and get the price you've negotiated or assigned to them. You can have unlimited amount of price lists.

EXAMPLE: Client A can get Product A for $99.95. Client B can get Product A for $109.95 while the customer that hasn'tnegotiated with you and logs in, or not, gets the default price of Product A at $129.95.

Requirements: compiled Merchant 4/CBS Dynamic Templates/ftp access to your stores mivadata folder. Tokens for use in DT are explained in the Tokens_readme.txt available in the distribution.

Pre-Documentation

Benefits of the module:

How module works:

Admin:

End User:

Price: $144.95 Upgrade Cost: $0 Upgrade Terms (If Any): N/A
Compatibility: OpenUI Versions: 4.14-4.24x (Available Compiled)
Other Module Compatibility: N/A

From: Account Screen Modules
Relevance: 76.49%%

Rating: (0.00) Votes: (0) Hits: (954) Reviews:
Rate It - Review It - Modify It - Report It

Bookmark Wholesale Pricing DT <-- Just click this link and then add to your favorites!

3 Percent Off Based on Quantity by Category Weiland / Miva Central

Volume pricing at the category level. Easily offer a discount based on the number of items in the basket and the categories those items are in.

Features: (some features are only in the compiled version - see details)
- Discount based on number of items ordered
- Set up to 4 tiers of discounts per category group
- Can have 8 groups (each containing one or more categories), each with 4 different discount tiers
- Category wide, multi-category or store wide discounts
- Optionally apply discount after other discounts have lowered the subtotal
- Discount shows at checkout as separate line item
- Optionally display updated discount in basket prior to checkout if using compiled OpenUI
- Can use wildcard instead of entering category codes for the group
- Can exclude a single price group, e.g. Wholesale, from receiving the discount
- MMUI and OpenUI compatible

Feature Details:
The default is to calculate product charges in the specified category(ies) (including attribute charges) to determine the subtotal to discount. You can optionally include non-product charges in the calculation.

In admin, the store owner configures the trigger levels (number of items needed to activate the discount) and the corresponding percentage off. The store owner can designate 1 - 4 trigger levels so that he/she can vary the percentage discount based on the number bought. Reward the customer; the more the customer buys, the higher the discount percentage.

The store owner then includes a list of category codes that will be used in the calculation. Use this module for category-wide or store-wide discounts.

The discount amount will appear during checkout on the screen after the customer has entered their shipping method. This allows Merchant to include (optionally) any miscellaneous fees or coupons redeemed on the Shipping - Payment selection screen so the subtotal will be adjusted before the discount.

Additional features are in the compiled version of the module for Merchant 4.14 and newer. In admin you can setup eight separate groups with their own four-tiered discount and categories. Hence, if you want to discount one category of products with one set of rules (levels) and another category with a different set of rules, you can now do this. Multiple categories can be assigned to each group. As the basket is scanned, the quantities are subtotaled for each group. The discount is applied based on each group's rules, then summed together at checkout. If you are using the OpenUI, you can optionally display the updated discounts prior to checkout in the regular basket screen. In admin, you can choose one price group, e.g. Wholesale, which is not eligible for the discount since they presumably already benefit from significantly lower prices. You can use the asterisk (*) to replace the category codes. When the module encounters the asterisk instead of category codes, it considers all further products eligible. As example, the asterisk in the first group would make all products in the store eligible for the discount. On the other hand, category codes in the first group would apply the first group rules to those categories. Then if there is an asterisk in the second group, all other products in the store would use those discount rules.

MMUI and OpenUI compatible. No editing of mv files required for either user interface for standard functioning. Configuration is setup through Merchant Admin.

3.x Version Available

Price: $25 Upgrade Cost: $10 Upgrade Terms (If Any): N/A
Compatibility: MMUI/OpenUI Versions: 3.x, 4.x, 4.14-4.16x (Available Compiled)
Other Module Compatibility: N/A

From: Discount Modules / Category Specific Discount Modules
Relevance: 41.77%%

Rating: (0.00) Votes: (0) Hits: (1286) Reviews:
Rate It - Review It - Modify It - Report It

Bookmark Percent Off Based on Quantity by Category <-- Just click this link and then add to your favorites!

4 Discount Based on Quantity by Category Weiland / Miva Central

Volume pricing at the category level. Easily offer a fixed discount (not percentage) based on the number of items in the basket and the categories those items are in.

Features:
- Discount based on number of items ordered
- Set up to 4 tiers of discounts per category group
- Can have 8 groups (each containing one or more categories), each with 4 different discount tiers
- Category wide, multi-category or store wide discounts
- Optionally apply discount after other discounts have lowered the subtotal
- Discount shows at checkout as separate line item
- Optionally display updated discount in basket prior to checkout if using compiled OpenUI
- Can use wildcard instead of entering category codes for the group
- Can exclude a single price group, e.g. Wholesale, from receiving the discount
- MMUI and OpenUI compatible

Feature Details:
In admin, the store owner configures the trigger levels (number of items needed to activate the discount) and the corresponding fixed amount off. The store owner can designate 1 - 4 trigger levels so that he/she can vary the discount based on the number bought. Reward the customer; the more the customer buys, the higher the discount.

The store owner then includes a list of category codes that will be used in the calculation. Use this module for category-wide or store-wide fixed discounts. If using store-wide, make sure the discount doesn't exceed the price of the potentially summed products. If using category-wide, make sure the discount does not exceed the price of the lowest priced product in the category.

The discount amount will appear during checkout on the screen after the customer has entered their shipping method.

Additional features. In admin you can setup eight separate groups with their own four-tiered discount and categories. Hence, if you want to discount one category of products with one set of rules (levels) and another category with a different set of rules, you can now do this. Multiple categories can be assigned to each group. As the basket is scanned, the discount is applied based on each group's rules, then summed together at checkout. If you are using the OpenUI, you can optionally display the updated discounts prior to checkout in the regular basket screen, recalculating and updating discounts based on changing basket contents. In admin, you can choose one price group, e.g. Wholesale, which is not eligible for the discount since they presumably already benefit from significantly lower prices. You can use the asterisk (*) to replace the category codes. When the module encounters the asterisk instead of category codes, it considers all further products eligible. As example, the asterisk in the first group would make all products in the store eligible for the discount. On the other hand, category codes in the first group would apply the first group rules to those categories. Then if there is an asterisk in the second group, all other products in the store would use those discount rules.

MMUI and OpenUI compatible. No editing of mv files required for either user interface for standard functioning. Optional display in the basket before checkout requires OpenUI. Configuration is setup through Merchant Admin.

Price: $50 Upgrade Cost: $0 Upgrade Terms (If Any): N/A
Compatibility: MMUI/OpenUI Versions: 4.14-4.16x (Available Compiled)
Other Module Compatibility: N/A

From: Discount Modules / Category Specific Discount Modules
Relevance: 41.77%%

Rating: (0.00) Votes: (0) Hits: (968) Reviews:
Rate It - Review It - Modify It - Report It

Bookmark Discount Based on Quantity by Category <-- Just click this link and then add to your favorites!

5 Discount Based on Quantity by Category v5 Emporium Plus / Miva Central

Volume pricing at the category level. Easily offer a fixed discount (not percentage) based on the number of items in the basket and the categories those items are in. We also have the corresponding module for an older version of Merchant.

Features:
- Discount based on number of items ordered
- Set up to 4 tiers of discounts per category group
- Can have 8 groups (each containing one or more categories), each with 4 different discount tiers
- Category wide, multi-category or store wide discounts
- Optionally apply discount after other discounts have lowered the subtotal
- Discount shows at checkout as separate line item
- Optionally display updated discount in basket prior to checkout
- Can use wildcard instead of entering category codes for the group
- Can either include or exclude a single price group, e.g. Wholesale, to be able to use the discount

Feature Details:
In admin, the store owner configures the trigger levels (number of items needed to activate the discount) and thecorresponding fixed amount off. The store owner can designate 1 - 4 trigger levels so that he/she can vary thediscount based on the number bought. Reward the customer; the more the customer buys, the higher the discount.

The storeowner then includes a list of category codes that willbe used in the calculation. Use this module for category-wide or store-wide fixed discounts. If using store-wide, make sure the discount doesn't exceed the priceof the potentially summed products. If using category-wide,make sure the discount does not exceed the price of the lowestpriced product in the category.

The discount amount will appear during checkout on the screen after the customer has entered their shipping method. You can optionally display the discount in the basket prior to checkout.

In admin you can setup eight separate groups withtheir own four-tiered discount and categories. Hence, if you want to discountone category of products with one set of rules (levels) and another category with a different set of rules, you can now do this. Multiple categories can be assigned to each group. As the basket is scanned, the discount is applied based on each group's rules, then summed together at checkout. You can optionally display the updated discounts prior to checkout in the regular basket screen, recalculating and updating discounts based on changing basket contents.

You can choose one price group, e.g. Wholesale, which is not eligible for the discount since they presumably already benefit from significantly lower prices. Or if you don't want to exclude, you can include the one group. This would be useful if you want to apply a fixed amount off for that price group rather than use Merchant's percent off price group calculations. This would allow you to discount different fixed amounts from different groupings (categories) of products.

You can use the asterisk (*) to replace the category codes. When the module encounters the asterisk instead of category codes, it considers all further products eligible. As example, the asterisk in the first group would make all products in the store eligible for the discount. On the other hand, category codes in the first group would apply the first group rules to those categories. Then if there is an asterisk in the second group, all other products in the store woulduse those discount rules.

The module currently fully supports the mivasql configuration of MIVA Merchant 5. It also supports MySQL as long as load balancing has the data stored on the single MySQL server. This would be the case in most of the server setups. For those that are not, we are in the process of converting the code for that remaining, very small group of MIVA Merchant stores. At this time we have not had a problem. Modules will be moved to the top of the queue as needed.

Price: $50.00 Upgrade Cost: $0 Upgrade Terms (If Any): N/A
Compatibility: N/A Versions: 5.x+
Other Module Compatibility: N/A

From: Discount Modules / Category Specific Discount Modules
Relevance: 41.77%%

Rating: (0) Votes: (0) Hits: (828) Reviews:
Rate It - Review It - Modify It - Report It

Bookmark Discount Based on Quantity by Category v5 <-- Just click this link and then add to your favorites!

6 Percent Off Based on Quantity by Category v5 Emporium Plus / Miva Central

Volume pricing at the category level. Easily offer a discount based on the number of items inthe basket and the categories those items are in. This module is for MIVA Merchant 5.x. We also have the corresponding module for an older version of Merchant.

Features:
- Discount based on number of items ordered
- Set up to 4 tiers of discounts per category group
- Can have 8 groups (each containing one or more categories), each with 4 different discount tiers
- Category wide, multi-category or store wide discounts
- Optionally apply discount after other discounts have lowered the subtotal
- Discount shows at checkout as separate line item
- Optionally display updated discount in basket prior to checkout using render token
- Can use wildcard instead of entering category codes for the group
- Can exclude a single price group, e.g. Wholesale, from receiving the discount

Feature Details:
Thedefault is to calculate product charges in the specifiedcategory(ies) (including attribute charges) to determinethe subtotal to discount. You canoptionally include non-product charges in the calculation.

In admin, the store owner configures the triggerlevels (number of items needed to activate the discount) and thecorresponding percentage off. The store owner candesignate 1 - 4 trigger levels so that he/she can vary thepercentage discount based on the number bought. Reward thecustomer; the more the customer buys, the higher thediscount percentage.

The storeowner then includes a list of category codes that willbe used in the calculation. Use this module forcategory-wide or store-wide discounts.

The discount amount willappear during checkout on the screen after the customer hasentered their shipping method. This allows Merchant toinclude (optionally) any miscellaneous fees or coupons redeemedon the Shipping - Payment selection screen so the subtotal willbe adjusted before the discount.

In admin you can setup eight separate groups withtheir own four-tiered discount and categories. Hence, if you want to discountone category of products with one set of rules (levels) and another categorywith a different set of rules, you can do this. Multiple categories can beassigned to each group. As the basket is scanned, the quantities are subtotaledfor each group. The discount is applied based on each group's rules, then summedtogether at checkout. You can optionally display the updated discounts prior to checkout in the regular basket screen, recalculatingand updating discounts based on changing basket contents.

In admin, you can chooseone price group, e.g. Wholesale, which is not eligible for the discount since theypresumably already benefit from significantly lower prices.

You can use the asterisk(*) to replace the category codes. When the module encounters the asterisk instead ofcategory codes, it considers all further products eligible. As example, the asterisk inthe first group would make all products in the store eligible for the discount. On the other hand,category codes in the first group would apply the first group rules to those categories.Then if there is an asterisk in the second group, all other products in the store woulduse those discount rules.

The module currently fully supports the mivasql configuration of MIVA Merchant 5. It also supports MySQL as long as load balancing has the data stored on the single MySQL server. This would be the case in most of the server setups. For those that are not, we are in the process of converting the code for that remaining, very small group of MIVA Merchant stores. At this time we have not had a problem. Modules will be moved to the top of the queue as needed.

Price: $27.50 Upgrade Cost: $0 Upgrade Terms (If Any): N/A
Compatibility: N/A Versions: 5.x+
Other Module Compatibility: N/A

From: Discount Modules / Category Specific Discount Modules
Relevance: 41.77%%

Rating: (0) Votes: (0) Hits: (813) Reviews:
Rate It - Review It - Modify It - Report It

Bookmark Percent Off Based on Quantity by Category v5 <-- Just click this link and then add to your favorites!

7 Volume Pricing v5 Emporium Plus / Miva Central

Discount your product base prices based on the number of items ordered of identical products, eg 1-3 = standard price, 4-6 = lower, etc. This module is for MIVA Merchant 5.x. We also have the corresponding module for an older version of Merchant.

Features:
- Discount product prices based on quantity ordered
- Easy from - to price breaks in a single input
- Unlimited price break ranges
- Fixed price or percentage off regular price
- Optional automatic start and stop dates for volume pricing
- Use our time zone offset to adjust the time that the date changes
- Each product can have different price breaks and dates
- Can use price groups with percentage discounts
- Optionally apply price group discount "on top of" volume price breaks
- Can exclude price groups from volume pricing
- Can exclude all except specific price groups
- Hide or display table which depicts price breaks
- Include a quantity input in the table on category pages
- Volume price can be applied on identical products or can amalgamate
- Can amalgamate discounts of different attributes in the same product
- Optional "as low as" to replace regular price
- Optional strike thru of regular price followed by volume price
- Can put all or some of your store products on sale within seconds
- Can remove all volume pricing in the store within seconds
- Flat file import for quick update
- Optional wild card can apply same volume pricing to all products
- Export volume pricing settings to flat file
- Use render tokens to place "as low as" and table on applicable screens
- Licensed by domain, unlimited stores under one MIVA Merchant mall pay no additional license fee

Feature Details:
This module's admin interface provides an easy to enter "from - to cost" format. You can literally have as many ranges as you want to type in. See the image below for example syntax. You can either use actual values to replace the base price or percent of price to be subtracted from the product base price. These price differentials are added directly in the admin interface under the product edit screen. You only apply these price differentials in the products that you want to use them.

This module applies the price in your low,high, cost groupings. If you do not include a grouping at the single item level, it will use the method for pricing in your store. It onlyactivates if you include a low, high, cost grouping. For example:
6|10|12%
11|20|14%
21|999|16%

The module only uses price groups when using the percentoff discount calculation. If you enter fixed prices for the quantity ranges, then price groups are ignored. Keep in mindthat the percent discounts could be over and above the discountalready given if you are using price groups.

You can opt to not give the price group an additional discount above the volume pricing. You can even make all or some price groups not eligible for volumepricing and hide the table from them completely. Conversely,you can exclude everybody from volume pricing except specific price group members. Customers must be logged in to identify the price group they are in before the volume pricing module can qualify or disqualify them from volume pricing if you are using the price group restrictions.

The percentage discounting method subtracts the percent discount from the base price. Base price does not include attribute prices. To apply the percentage, simply include the percent symbol (%) in the line. If you are using cost method for your store (other than price groups), you will not be able to use the percentage discounting method. Instead, use the actual value method.

If you are using another third party module which overrides prices in the basket and recomputes them using the price in the product record, youmay not be able to use this module. Other third party modules may notrecognize that it needs to apply the calculations in this module.

The module recognizes identical products. Hence different product codes will change the product enough that the discountwon't apply. For example 3 red shirts and 6 blue shirts willnot give the discount of 9 shirts. Rather, they'll get the discount rate of 3 for one of the line items and 6 for the other.

You can amalgamate quantities so in the example above, as long as the product code is the same and the color variation is done with attributes, all 9 items would get the volume discount for 9 items. You have the option for each product code to amalgamate quantities or treat varied attributes as different products.

You can optionally include a table on the product (PROD) andcategory (CTGY) screens displaying the rates as generatedfrom the products' volume discount record. You can optionallyhave a quantity input in that table display on the category screen. These options areconfigured through admin.

If you want to have a sale on one or moreitems. Simply set the volume to 1 or more with a specific discount percentage and you have a sale with as low as display. You can use the token %product_price_f% to further highlight that witha strike thru. To make this feature even more useful, youcan enter a starting and ending date for the sale so that itwill start and end automatically.

For ease of entry, a flat file import module is included. You can put all product codes in the flat file or use an asterisk (*) and one lineof "rules" to apply the volume price to all products in thestore. Create a storewide sale, e.g. 10% off in seconds with a specific start and stop date. Then just as quickly removeall settings at your leisure after the sale. There is also a volume price export so you can quickly build your flat file, then edit or add to it. This is useful when you want to have a storewide sale on all products butretain volume prices on your regularly discounted items. Export the volume prices. Import your sale settings. Importyour volume discounts on the few you want to maintain at pre-sale prices.

Price: $35.00 Upgrade Cost: $0 Upgrade Terms (If Any): N/A
Compatibility: N/A Versions: 5.x+
Other Module Compatibility: N/A

From: Discount Modules / Volume and Quantity Discount Modules
Relevance: 25.86%%

Rating: (0) Votes: (0) Hits: (982) Reviews:
Rate It - Review It - Modify It - Report It

Bookmark Volume Pricing v5 <-- Just click this link and then add to your favorites!

8 Volume Pricing Weiland / Miva Central

Discount your product prices based on the number of items ordered of identical products, eg 1-3 = standard price, 4-6 = lower, etc.

The admin interface provides an easy to enter "from - to cost" format. You can literally have as many ranges as you want to type in. See the image below for example syntax. You can either use actual values or percent of price to be subtracted from the product price. These price differentials are added directly in the admin interface under the product edit screen. You only apply these price differentials in the products that you want to use them.

This module applies the price in your low, high, cost groupings. If you do not include a grouping at the single item level, it will use the method for pricing in your store. It only activates if you include a low, high, cost grouping. For example:
6|10|12%
11|20|14%
21|999|16%

The module only uses price groups when using the percent off discount calculation. If you enter fixed prices for the quantity ranges, then price groups are ignored. Keep in mind that the percent discounts will be over and above the discount already given if you are using price groups.

In the compiled version you can opt to not give the price group an additional discount above the volume pricing. You can even make all or some price groups not eligible for volume pricing and hide the table from them completely. Customers must be logged in to identify the price group they are in before the volume pricing module can disqualify them from volume pricing.

The percentage discounting method subtracts the percent discount from the base price. Base price does not include attribute prices. To apply the percentage, simply include the percent symbol (%) in the line. If you are using cost method for your store (other than price groups), you will not be able to use the percentage discounting method. Instead, use the actual value method.

If you are using another third party module which overrides prices in the basket and recomputes them using the price in the product record, you will not be able to use this module. Other third party modules will not recognize that it needs to apply the calculations in this module.

The module recognizes identical products. Hence different attributes will change the product enough that the discount won't apply. For example 3 red shirts and 6 blue shirts will not give the discount of 9 shirts. Rather, they'll get the discount rate of 3 for one of the line items and 6 for the other.

The module for the compiled version of merchant DOES have the ability to amalgamate quantities so in the example above as long as the product code is the same, all 9 items would get the volume discount for 9 items. You have the option for each product code to amalgamate quantities or treat varied attributes as different products.

You can optionally include a table on the product (PROD) and category (CTGY) screens displaying the rates as generated from the products' volume discount record. You can see an example of that with our best seller products. You can optionally have a quantity input in that table display. These options are configured through admin.

New in the compiled version is compatibility interface with the OpenUI Tokens and Viking Coders product template module. Place the table display on the product page so that it better fits your desired look. New configuration options added for the table display. Also, the ability to display the lowest price in place of the standard price when volume pricing effects the product, the store is using the OpenUI, the store is version 4.14 or higher, and there are no other 3rd party modules effecting the price display. This feature is useful if you want to have a sale on one or more items. Simply set the volume to 1 or more with a specific discount percentage and you have a sale with as low as display. You can use the token %product_price_f% to further highlight that with a strike thru. To make this feature even more useful, you can enter a starting and ending date for the sale so that it will start and end automatically. For ease of entry, a flat file import module is included. You can put all product codes in the flat file or use an asterisk (*) and one line of "rules" to apply the volume price to all products in the store. Create a storewide sale, e.g. 10% off in seconds with a specific start and stop date. Then just as quickly remove all settings at your leisure after the sale. There is also a volume price export so you can quickly build your flat file, then edit or add to it. This is useful when you want to have a storewide sale on all products but retain volume prices on your regularly discounted items. Export the volume prices. Import your sale settings. Import your volume discounts on the few you want to maintain at pre-sale prices. The volume price can also be used in our compiled Fast Data Feed module for froogle submissions and our Static Catalog Generator which creates static html pages for better search engine indexing.

Price: $29.50 Upgrade Cost: $15 Upgrade Terms (If Any): N/A
Compatibility: MMUI/OpenUI Versions: 2.x, 3.x, 4.x, 4.14-4.16x (Available Compiled)
Other Module Compatibility: N/A

From: Discount Modules / Volume and Quantity Discount Modules
Relevance: 16.46%%

Rating: (9.00) Votes: (2) Hits: (1920) Reviews:
Rate It - Review It - Modify It - Report It

Bookmark Volume Pricing <-- Just click this link and then add to your favorites!

9 Smart Products (Auto Attributes and Pricing) CrosstownTraffic.Net /

Smart Products allows products to have pricing on their own set of rules.

Beads and jewels module allows for Pricing on Color / Size combinations. Infinite size options per product, and 58 colors already available for selection. See it in action here.

Wood module will accept partial, fractional, and decimal quantities. This module is not for everyone. Currently set-up to price by cut length, and also predefined lengths. Contains import and export ability for prices by code, and also weights for different sets of sub products. Shows an ability to price per inch, per foot, per yard. Can be customized for many uses. See it in action here.

Apparel module allows 'Auto Fill' of available colors for items, depending on the size selected! See it in action here. Infinit sizes and colors. Pricing is by size, with the colors available configurable. This module helps to offer Multiple Sizes and Colors from one product that would usually take many products to acheive. It is a fact that for each size of an item, the colors available will vary. Will work for pants, shorts, shirts, jackets, gloves, hats, shoes, belts - most apparell items.

If you are unsure about the suitability for your application, please feel free to ask for more details.

Each of the above sets, or custom module sets come complete with Import and Export Modules to make getting the option data into and out of your store very easy.

Beads OUI 4.00-4.13 (+ $90)
Beads OUI 4.14+ Compiled (+ $90)
Wood OUI 4.00-4.13 Only
Apparel OUI 4.00-4.13 (+ $190)
Apparel OUI 4.14+ Compiled) (+ $190)

Price: $120.20 Upgrade Cost: $0 Upgrade Terms (If Any): N/A
Compatibility: OpenUI Versions: 4.x
Other Module Compatibility: N/A

From: Special Pricing Hide Prices Modules
Relevance: 12.84%%

Rating: (10.00) Votes: (1) Hits: (1461) Reviews:
Rate It - Review It - Modify It - Report It

Bookmark Smart Products (Auto Attributes and Pricing) <-- Just click this link and then add to your favorites!

10 Dynamic Attribute Pricing Phosphormedia / Miva Central

Show customers the actual price they will pay!

Customers order more, and more frequently when its easy for them to know what the price of a product is going to be. Dynamic Attribute Pricing will do just that, reqardless of how your pricing is assigned. Dynamic Attribute Pricing shows your customers to total price of the product they want to order, even when that product's attributes and options add to or subtract from the initial price.

This module is compatible with OpenUI or Viking Coder's Category Page Templates and Product Page Templates. With OpenUI, a "Total Price: " display appears above the add quantity to basket button. With VikingCoder's Templates, you have place the Total Price: token and add to basket button anywhere you want in the templates. The displayed total changes with option selections that have an associate price increase (decrease) and with the quantity select.

With either OpenUI or Template, the module will automatically add any additional price associated with the option, to the display of the option. For example:
Some Option ($2.00).

To control the quantity a customer can order, the module presents a tab in the Add/Edit Product screen. This tab shows the following options:

For example, if you entered 3,6,9,12,15,18, etc, the customer could only order in multiples of 3.

Will also allow image swapping with CPT and PPT! You can display a larger image for attributes where the product image is by including name="PRODImage" with your product image code.

Price: $89.99 Upgrade Cost: $0 Upgrade Terms (If Any): N/A
Compatibility: OpenUI Versions: 4.x, 4.14-4.23x (Available Compiled)
Other Module Compatibility: N/A

From: Attributes Modules / Attributes Price Display Modules
Relevance: 11.03%%

Rating: (0.00) Votes: (0) Hits: (1513) Reviews:
Rate It - Review It - Modify It - Report It

Bookmark Dynamic Attribute Pricing <-- Just click this link and then add to your favorites!

11 Strike-Thru Pricing modStop /

This OpenUI extension module sets the products in your store to display a striked-thru retail price when the current price (using Price Groups or DiscountTrkPro) is less. Will automatically display the normal price (with strike-thru formattig), the shopper's special price, as well as their savings (both the dollar savings and percentage savings).

Price: $17.95 Upgrade Cost: $0 Upgrade Terms (If Any): Terms
Compatibility: MMUI/OpenUI Versions: 2.x, 3.x, 4.x, 4.14-4.16x (Available Compiled)
Other Module Compatibility: N/A

From: Discount Modules / Show Discount Modules
Relevance: 11.03%%

Rating: (0.00) Votes: (0) Hits: (1108) Reviews:
Rate It - Review It - Modify It - Report It

Bookmark Strike-Thru Pricing <-- Just click this link and then add to your favorites!

12 Override Pricing Weiland / Miva Central

Allow your customers to enter an offer price for a product that is in your products database. You can also use it for auction high bidder purchases. This module is similar to our External Product Purchase module. The difference is that Override Pricing is best suited for products that are actually in your inventory so the customer sees the product image, description, etc that they are offering/bidding on. With External Product Purchase, the customer is seeing a generic product page where they enter the product name, ID, offer/bid price, and weight.

The offer or high bid is entered into the text attribute on the product page. The price in the basket reflects that customer entered offer/bid price. The order will then continue as normal. However, you can create a disclaimer that if the offer/bid is not accepted, the order will be cancelled and payment refunded. Consult with an attorney on the best wording for your disclaimer as you would not want to be required to sell at their entered price.

The attribute for the override pricing input can also be modified in admin if you are using the OpenUI. You can select to shorten the input to 10 characters (size) or you can even make it a hidden input. You can also have regular product attributes on the same product page. For example, you may want to have an optional auction ID in case the item is going to be sold in store and/or through auction. The link from the auction win could include the auction ID and it would also pre-filled when clicked.

There are also some examples of links and .htaccess re-write rules for making short url links for typical uses of this module in its online install/usage doc.

Limitation: There are some 3rd party modules which change the price in the basket AFTER the item has already been added to the basket. Most notable are those which re-do all of the prices if a customer is in a price group but forgot to login at the beginning of shopping. If you are going to get one of those modules, make sure it 1) only changes the price if the basket price and actual product price are the same (which means no special actions had been taken on the price when it was put in the basket initially), 2) it does not make the basket price higher than the current basket price as the Override Price module which controlled the actual addition of the item to the basket should be the module to determine the offer/bid price. If you already have a module which makes those sweeping basket price changes without regard for the module that put the product in the basket, you may want to contact that module's developer to see if they could add the two simple rules above to their logic to reduce module conflict.

Price: $35 Upgrade Cost: $0 Upgrade Terms (If Any): N/A
Compatibility: OpenUI Versions: 4.14-4.16x (Available Compiled)
Other Module Compatibility: N/A

From: Special Pricing Hide Prices Modules
Relevance: 11.03%%

Rating: (0.00) Votes: (0) Hits: (1248) Reviews:
Rate It - Review It - Modify It - Report It

Bookmark Override Pricing <-- Just click this link and then add to your favorites!

13 Dimension Pricing Weiland / Miva Central

Charge your customers by the variable size of the item they are ordering. This module is used to calculate prices on items which are priced, e.g. by the foot, by the inch, or other units of measure. This is particularly useful when the store owner does not want to have a pull down select list of infinite values.

The module also eliminates the common hack that stores have used which involved using the number of the items added to the basket to adjust charges. This module allows the customer to specify two dimensions (e.g. length and width) as item attributes on the product screen (PROD) and still be able to order more than one of that item. Not for upsell products. For example, ordering four 8" X 10" picture frames involves entering 8 in the length attribute and 10 in the width attribute and entering 4 in the add to basket quantity input.

The store owner determines the storewide number of free units (if any), e.g. square inches, and the lowest and the highest values that can be used in the measurement. The store owner can also use price groups to vary the dimension pricing for applicable customers. The attributes type is usually text but could be select list pull down. It cannot be a template. The attribute prompts can read whatever the store owner desires to direct the customer to enter the numeric measurement. If you are using our Attribute Prompt vs Code module, that prompt will also display on the basket, invoice and emails instead of the attribute code. The store owner's settings are configured in admin.

The customer enters the dimensions to form the combined units (e.g. square inches) and the module calculates the price based on the calculated units times the price of the first dimension attribute.

Version 4.x Available

Price: $25 Upgrade Cost: $5 Upgrade Terms (If Any):
Compatibility: MMUI/OpenUI Versions: 4.14-4.16x (Available Compiled)
Other Module Compatibility: N/A

From: Special Pricing Hide Prices Modules
Relevance: 9.22%%

Rating: (0.00) Votes: (0) Hits: (1519) Reviews:
Rate It - Review It - Modify It - Report It

Bookmark Dimension Pricing <-- Just click this link and then add to your favorites!

14 Entity Count Pricing Weiland / Miva Central

In Merchant version 3.x, the phrase can be in either a text input or textarea input. In Merchant version 2.2x, the text input is the only attribute available.

The customer enters the phrase and the module calculates the price based on the number of letters/words and the base price of the attribute. The store owner determines if it will be a word count or letter count by the attribute code, i.e. PHRASE-W or PHRASE-L. Not for upsell products.

Versions 2.x, 3.x, 4.x Available

Price: $20 Upgrade Cost: $5 Upgrade Terms (If Any): For 4.x Only Compatibility: MMUI/OpenUI Versions: 4.14-4.16x (Available Compiled)
Other Module Compatibility: N/A

From: Special Pricing Hide Prices Modules
Relevance: 9.22%%

Rating: (0.00) Votes: (0) Hits: (1323) Reviews:
Rate It - Review It - Modify It - Report It

Bookmark Entity Count Pricing <-- Just click this link and then add to your favorites!

15 Entitiy Count Pricing v5 Emporium Plus / Miva Central

Charge your customers by the number of letters or words customers include in a text field attribute called PHRASE-L or PHRASE-W respectively. This module is used to calculate individual entity pricing for engraving, embroidering, etc. The attribute can be in either a text input or textarea input. This module is for MIVA Merchant 5.x. We also have the corresponding module for an older version of Merchant.

Price: $22.95 Upgrade Cost: $0 Upgrade Terms (If Any): N/A
Compatibility: N/A Versions: 5.x+
Other Module Compatibility: N/A

From: Special Pricing Hide Prices Modules
Relevance: 9.22%%

Rating: (0) Votes: (0) Hits: (972) Reviews:
Rate It - Review It - Modify It - Report It

Bookmark Entitiy Count Pricing v5 <-- Just click this link and then add to your favorites!

16 Basket Price Group Recalc v5 Emporium Plus / Miva Central

Recalculate the basket prices based on the price group a customer is in when they log in. Normally, if a customer is not logged in when they place items in the basket, the basket price will be a non-price group price, even after they log in at check out.

Features:
- Automatically recalculate basket prices when logging in
- Exclude specific product codes from the recalculation
- Safety check price change to ensure it does not raise it
- Token available to force recalculation in addition to the automatic log in recalculation (Merchant 5.x only)

Feature Details.
Automatically recalculate. When the customer logs in, the module will determine the price group status of the customer. If they are in a price group, it will recalculate the prices in the basket to reflect the price group prices of the items.

Product exclusion. In some cases, you may not want to recalculate the basket price for specific products. As example, there are 3rd party modules which adjust the basket price based on other factors set by those modules. The External Product Purchase (sold separately), Size Pricing, Dimension Pricing, Override Pricing modules allow the customer to enter values in the products' attributes which ultimately effect the basket prices of the products. This product exclusion feature lets you exclude those products from the recalculation process. The basket price will remain as it was calculated by the 3rd party module that originally controlled the addition of the product into the basket.

Safety check. The module will verify that the price group recalculation will actually lower the price. Some 3rd party modules discount item prices at the time they are added to the basket, based on a variety of factors. An example of this is Volume Pricing (sold separately). If the customer orders in quantity and you have set the threshold so they will get a price break for multiples of the item, the item will be added to the basket at a price lower than its individual item price. In some cases, that value could even be lower than price group prices. The recalculation module will compare the two prices and use the lower of the two for the basket price.

Additional token. The additional token feature is in the Merchant 5.x version of the module only. This module will make the recalculation at the time the customer logs in. In some cases, you might want to force the process again. For example, the Emporium Plus Customer and Product Administration module (sold separately) has an automatic price group promotion feature. If you set that to occur when they log in, it actually happens when the screen displays at the point you place the token to do that. As the recalculation module does its automatic feature before the screen displays, the customer would not get the full advantage of a promotion to a new price group. Hence, if you are using a price group promotion feature in another 3rd party module, you can follow that process with a forced basket price group recalculation.

The module currently fully supports the mivasql configuration of MIVA Merchant 5. It also supports MySQL as long as load balancing has the data stored on the single MySQL server. This would be the case in most of the server setups. For those that are not, we are in the process of converting the code for that remaining, very small group of MIVA Merchant stores. At this time we have not had a problem. Modules will be moved to the top of the queue as needed.

Price: $33.50 Upgrade Cost: $0 Upgrade Terms (If Any): N/A
Compatibility: N/A Versions: 5.x+
Other Module Compatibility: N/A

From: Availability Price Group Modules
Relevance: 7.41%%

Rating: (0.00) Votes: (0) Hits: (1372) Reviews:
Rate It - Review It - Modify It - Report It

Bookmark Basket Price Group Recalc v5 <-- Just click this link and then add to your favorites!

17 Category Page Templates Viking Coders / Miva Central

Full control of the look of your category pages!

The module lets you configure the category page html to your liking. It provides an interface for you to enter the specific HTML that you want to use to display the product listing for the category. You create templates which you can then assign to selected categories. The module comes with 4 preinstalled templates but you can add as many as you want. One of the preinstalled template provides for a category display that lets you add all of the listed products to your basket with the click of a single button. Another provides for the display of multiple products in rows across the page instead of vertically. In your templates, you can use tokens to represent the normal Merchant product and category fields. For example, you can use the token %prodname% to represent where you want the product's name to be displayed. Making changes like removing the "buy one now" button is as simple as tweaking the HTML used to display the page. One of the preinstalled templates is identical to the standard Merchant category display and serves as a good starting point for those little tweaks you have always been wanting to make. The module also permits you to copy existing templates when you are creating a new template.

You can use strike-thru pricing with this module too!

Note about compatibility with other modules: This module totally replaces the portion of the OpenUI (or MMUI if you are using it) that displays the Category page and is not compatible with any other module which modifies the category page unless the developer of that module has specifically made their module compatible. This module provides for an easy-to-use manner for developers to provide tokens that can be used to insert their module's HTML into the pages. And these tokens can be registered in the module's admin interface. All VikingCoders.com's modules are compatible with this module (ie. there are tokens that can be used to display their information on the category page) or soon will be.

Another note about compatibility: This module is compatible with the OpenUI right out of the box. However, for it to be compatible with the MMUI requires a minor modification to the MMUI file (ie. mmui.mv).

Version 3.x Available

Price: $44.95 Upgrade Cost: $14 Upgrade Terms (If Any): N/A
Compatibility: MMUI/OpenUI Versions: 4.x, 4.14-4.16x (Available Compiled)(OpenUI Required)
Other Module Compatibility: Is compatible with Display Wizard Pro.

From: Category Screen Modules
Relevance: 7.41%%

Rating: (10.00) Votes: (5) Hits: (3745) Reviews:
Rate It - Review It - Modify It - Report It

Bookmark Category Page Templates <-- Just click this link and then add to your favorites!

18 Price Wizard Luray / Design Extend

Now you can easily customize and display varying price and cost fields.

With Price Wizard, you can opt to display the price field, cost field or another field calculated by both price and cost fields. You can optionally show customers their overall savings on a per product basis.

Price information can be optionally displayed on product, category, product list or search screens.

Price: $29.95 Upgrade Cost: $15 Upgrade Terms (If Any): N/A
Compatibility: OpenUI Versions: 3.x, 4.x, 4.14-4.16x (Available Compiled)
Other Module Compatibility: N/A

From: Discount Modules / Show Discount Modules
Relevance: 7.41%%

Rating: (0.00) Votes: (0) Hits: (1028) Reviews:
Rate It - Review It - Modify It - Report It

Bookmark Price Wizard <-- Just click this link and then add to your favorites!

19 Price Wizard Professional Luray / Miva Central

Displays MSRP, Savings and Price 3 ways:

1. Use the Cost field to set MSRP and display savings as difference or Percentage.
2. Use a Percent markup over Price to extablish MSRPand display savings as difference or Percentage.
3. Use Price Groups to set discount and display normal price as MSRP and savings the difference between Price and Adjusted Price.
* 4. Use both Group Method and Price Methods simultaneously.

* Display MSRP with or without strike through.
* Create your own labels for "MSRP", "Savings" and "Your Price".
* Font size, color and bold control.
* Select screens to display the above information.

Independent and simultaneous control over Flagged Products

Supress Price on Flagged Products

* Designate specific products not to display price.
* Replace Price with your message on flagged products.
* Replace Price for Flagged Products with HTML link.
* Replace Price with Email link (adds Product Code and Name to Subject line.)
* Select screens to display the above information.
* Supress "Add" and "Buy"Buttons.

Independent and simultaneous control over products with a Price of Zero

* Create your own message to replace "Price".
* Email link includes Product Code and Name in Subj Line.
* Replace 0.00 Price with an HTML link to another page.
* Select screens to display the above information.
* Remvoe "Add" and "Buy" buttons.

Forced Login controlled by two methods:

* No Access without Login at all.
* Suppress Price, Add to Basket and Buy Buttons.
* Place Order without Account suppression optional
* Create New Account suppression optional.

Price: $44.95 Upgrade Cost: $20 Upgrade Terms (If Any): N/A
Compatibility: OpenUI Versions: 4.x, 4.14-4.16x (Available Compiled)
Other Module Compatibility: N/A

From: Discount Modules / Show Discount Modules
Relevance: 7.41%%

Rating: (0.00) Votes: (0) Hits: (1253) Reviews:
Rate It - Review It - Modify It - Report It

Bookmark Price Wizard Professional <-- Just click this link and then add to your favorites!

20 Price Group Import/Export modStop /

Miva Merchant Pricing Group Import Modules allows you to import and export your pricing group settings without having to go through the Merchant Admin interface. You can easily assign customers and products to a price group using the flat file import module. The import file allows you to upload the file through the admin interface. The export module on the other hand provides you with the ability to email the export file as an attatchment to the email address you specify.

Price: $57.95 Upgrade Cost: $0 Upgrade Terms (If Any): Terms
Compatibility: MMUI/OpenUI Versions: 2.x, 3.x, 4.x, 4.14-4.16x (Available Compiled)
Other Module Compatibility: N/A

From: Import Export Modules / Availability and Price Groups Import and Export Modules
Relevance: 5.61%%

Rating: (0.00) Votes: (0) Hits: (1126) Reviews:
Rate It - Review It - Modify It - Report It

Bookmark Price Group Import/Export <-- Just click this link and then add to your favorites!

Next Page ť

Pages: [1] 2 3

Miva Merchant Modules Home - Miva Merchant Hosting - Miva Merchant Developers - Miva Merchant Help
Miva Conference

Miva, Miva Engine, Miva Empressa, Miva Mia, Miva Merchant, and the Miva Corp. Blade Logo are trademarks of Miva Corporation, developer of the best ecommerce shopping cart software.