Features:
- Discount product prices based on quantity ordered
- Easy from - to price breaks in a single input
- Unlimited price break ranges
- Fixed price or percentage off regular price
- Optional automatic start and stop dates for volume pricing
- Use our time zone offset to adjust the time that the date changes
- Each product can have different price breaks and dates
- Can use price groups with percentage discounts
- Optionally apply price group discount "on top of" volume price breaks
- Can exclude price groups from volume pricing
- Can exclude all except specific price groups
- Hide or display table which depicts price breaks
- Include a quantity input in the table on category pages
- Volume price can be applied on identical products or can amalgamate
- Can amalgamate discounts of different attributes in the same product
- Optional "as low as" to replace regular price
- Optional strike thru of regular price followed by volume price
- Can put all or some of your store products on sale within seconds
- Can remove all volume pricing in the store within seconds
- Flat file import for quick update
- Optional wild card can apply same volume pricing to all products
- Export volume pricing settings to flat file
- Use render tokens to place "as low as" and table on applicable screens
- Licensed by domain, unlimited stores under one MIVA Merchant mall pay no additional license fee
Feature Details:
This module's admin interface provides an easy to enter "from - to cost" format. You can literally have as many ranges as you want to type in. See the image below for example syntax. You can either use actual values to replace the base price or percent of price to be subtracted from the product base price. These price differentials are added directly in the admin interface under the product edit screen. You only apply these price differentials in the products that you want to use them.
This module applies the price in your low,high, cost groupings. If you do not include a grouping at the single item level, it will use the method for pricing in your store. It onlyactivates if you include a low, high, cost grouping. For example:
6|10|12%
11|20|14%
21|999|16%
The module only uses price groups when using the percentoff discount calculation. If you enter fixed prices for the quantity ranges, then price groups are ignored. Keep in mindthat the percent discounts could be over and above the discountalready given if you are using price groups.
You can opt to not give the price group an additional discount above the volume pricing. You can even make all or some price groups not eligible for volumepricing and hide the table from them completely. Conversely,you can exclude everybody from volume pricing except specific price group members. Customers must be logged in to identify the price group they are in before the volume pricing module can qualify or disqualify them from volume pricing if you are using the price group restrictions.
The percentage discounting method subtracts the percent discount from the base price. Base price does not include attribute prices. To apply the percentage, simply include the percent symbol (%) in the line. If you are using cost method for your store (other than price groups), you will not be able to use the percentage discounting method. Instead, use the actual value method.
If you are using another third party module which overrides prices in the basket and recomputes them using the price in the product record, youmay not be able to use this module. Other third party modules may notrecognize that it needs to apply the calculations in this module.
The module recognizes identical products. Hence different product codes will change the product enough that the discountwon't apply. For example 3 red shirts and 6 blue shirts willnot give the discount of 9 shirts. Rather, they'll get the discount rate of 3 for one of the line items and 6 for the other.
You can amalgamate quantities so in the example above, as long as the product code is the same and the color variation is done with attributes, all 9 items would get the volume discount for 9 items. You have the option for each product code to amalgamate quantities or treat varied attributes as different products.
You can optionally include a table on the product (PROD) andcategory (CTGY) screens displaying the rates as generatedfrom the products' volume discount record. You can optionallyhave a quantity input in that table display on the category screen. These options areconfigured through admin.
If you want to have a sale on one or moreitems. Simply set the volume to 1 or more with a specific discount percentage and you have a sale with as low as display. You can use the token %product_price_f% to further highlight that witha strike thru. To make this feature even more useful, youcan enter a starting and ending date for the sale so that itwill start and end automatically.
For ease of entry, a flat file import module is included. You can put all product codes in the flat file or use an asterisk (*) and one lineof "rules" to apply the volume price to all products in thestore. Create a storewide sale, e.g. 10% off in seconds with a specific start and stop date. Then just as quickly removeall settings at your leisure after the sale. There is also a volume price export so you can quickly build your flat file, then edit or add to it. This is useful when you want to have a storewide sale on all products butretain volume prices on your regularly discounted items. Export the volume prices. Import your sale settings. Importyour volume discounts on the few you want to maintain at pre-sale prices. The module currently fully supports the mivasql configuration of MIVA Merchant 5. It also supports MySQL as long as load balancing has the data stored on the single MySQL server. This would be the case in most of the server setups. For those that are not, we are in the process of converting the code for that remaining, very small group of MIVA Merchant stores. At this time we have not had a problem. Modules will be moved to the top of the queue as needed. Price: $35.00 Upgrade Cost: $0
Upgrade Terms (If Any): N/A
Compatibility: N/A Versions:
5.x+
Other Module Compatibility: N/A From: Discount Modules / Volume and Quantity Discount Modules
Relevance: 22.98%%  Rating: (0) Votes: (0) Hits: (982) Reviews:
Rate It - Review It - Modify It - Report It Bookmark Volume Pricing v5
<-- Just click this link and then add to your favorites! Back to Top
Discount your product prices based on the number
of items ordered of identical products, eg 1-3 =
standard price, 4-6 = lower, etc. The admin interface provides an easy to enter "from - to cost" format. You can literally have as many ranges as you want to type in. See the image below for example syntax. You can either use actual values or percent of price to be subtracted from the product price. These price differentials are added directly in the admin interface under the product edit screen. You only apply these price differentials in the products that you want to use them. This module applies the price in your low, high, cost groupings. If you do not include a grouping at the single item level, it will use the method for pricing in your store. It only activates if you include a low, high, cost grouping.
For example:
6|10|12%
11|20|14%
21|999|16% The module only uses price groups when using the percent off discount calculation. If you enter fixed prices for the quantity ranges, then price groups are ignored. Keep in mind that the percent discounts will be over and above the discount already given if you are using price groups. 
In the compiled version you can opt to not give the price group an additional discount above the volume pricing. You can even make all or some price groups not eligible for volume
pricing and hide the table from them completely. Customers
must be logged in to identify the price group they are in before
the volume pricing module can disqualify them from volume pricing.
The percentage discounting method subtracts the percent discount from the base price. Base price does
not include attribute prices. To apply the percentage,
simply include the percent symbol (%) in the line. If
you are using cost method for your store (other than
price groups), you will not be able to use the percentage
discounting method. Instead, use the actual value method. If you are using another third party module which overrides prices in the basket and recomputes them using the price in the product record, you will not be able to use this module. Other third party modules will not
recognize that it needs to apply the calculations in this module. The module recognizes identical products. Hence different attributes will change the product enough that the discount won't apply. For example 3 red shirts and 6 blue shirts will not give the discount of 9 shirts. Rather, they'll get the discount rate of 3 for one of the line items and 6 for the other.
The module for the compiled version of merchant DOES have the ability to amalgamate quantities so in the example above as long as the product code is the same, all 9 items would get the volume discount for 9 items. You have the option for each product code to amalgamate quantities or treat varied attributes as different products. You can optionally include a table on the product (PROD) and category (CTGY) screens displaying the rates as generated from the products' volume discount record. You can see an example of that with our best seller products. You can optionally have a quantity input in that table display. These options are configured through admin.
New in the compiled version is compatibility interface with the OpenUI Tokens and Viking Coders product template module. Place the table display on the product page so that it better fits your desired look. New configuration options added for the table display. Also, the ability to display the lowest price in place of the standard price when volume pricing effects the product, the store is using the OpenUI, the store is version 4.14 or higher, and there are no other 3rd party modules effecting the price display. This feature is useful if you want to have a sale on one or more items. Simply set the volume to 1 or more with a specific discount percentage and you have a sale with as low as display. You can use the token %product_price_f% to further highlight that with a strike thru. To make this feature even more useful, you can enter a starting and ending date for the sale so that it will start and end automatically. For ease of entry, a flat file import module is included. You can put all product codes in the flat file or use an asterisk (*) and one line of "rules" to apply the volume price to all products in the store. Create a storewide sale, e.g. 10% off in seconds with a specific start and stop date. Then just as quickly remove all settings at your leisure after the sale. There is also a volume price export so you can
quickly build your flat file, then edit or add to it. This
is useful when you want to have a storewide sale on all products but retain volume prices on your regularly discounted items. Export the volume prices. Import your sale settings. Import your volume discounts on the few you want to maintain at
pre-sale prices. The volume price can also be used in our compiled
Fast Data Feed module for
froogle submissions and our
Static Catalog Generator which creates static html pages for better search engine indexing. Price: $29.50 Upgrade Cost: $15
Upgrade Terms (If Any): N/A
Compatibility: MMUI/OpenUI Versions:
2.x, 3.x, 4.x, 4.14-4.16x (Available Compiled)
Other Module Compatibility: N/A From: Discount Modules / Volume and Quantity Discount Modules
Relevance: 14.74%%  Rating: (9.00) Votes: (2) Hits: (1920) Reviews:
Rate It - Review It - Modify It - Report It Bookmark Volume Pricing
<-- Just click this link and then add to your favorites! Back to Top
The NetPush Advanced Inventory Module allows Miva Merchant store owners to track inventory within Miva Merchant all the way down to the attribute/option level. The module has numerous configuration settings that should allow the admin to display and track any simple or complex inventory configuration. Inventory levels are only adjusted at checkout time so there is no need to worry about old baskets causing inventory problems. The module comes with an import and export module that allows administrators to easily update inventory levels by using csv files. We suggest using template modules like Viking Coder's Product Templates and
Category Templates if you want better control of the look and feel of your pages with regards to inventory. This will allow you to use tokens for display. Otherwise, you will have to settle for built in hook point displays that are built into the module and are configurable through the administration area. The Advanced Inventory Module will send email when stock goes below certain configurable low stock level and can disable products when stock goes below the out of stock level. Administrators can also customize every message shown to the user. Fine grain customizations are made easy because the module allows product level configuration settings the ability to override global inventory configuration settings. This allows Miva Merchant Administrators the ability to customize inventory configurations for every product, if he or she wishes.
Notes: - OpenUI Tokens
This module can be used with OUI OpenTokens. To use the module with Viking Coders template modules, see the OpenToken instructions and examples in the documentation on the NetPush.com site.
- Product Upsell
This module does not show stock information on the product upsell screens at this time. Stock is still tracked in the basket and checkout, but no current stock level is shown on the upsell screens during checkout unless you are using alternatives like tokens in templates.
- Basket Redirect and Error Message
The user is automatically redirected to the basket screen if he or she adds items to the basket that makes the product go out of stock or if the product is already out of stock. The error message is shown above the basket screen using a hook point in the Open UI. The message is configurable in the admin area.
- Checkout Screen Error
If configuration is setup to do so, the module will block a user from checking out if their basket has an item that is out of stock. This message is shown automatically at the top of the screen. The message is configurable in the admin area.
- Pipes ( | )
Product codes, attribute codes, and option codes must not contain the pipe character. NetPush Advanced Inventory uses the pipe to delimit for lookups. Pipes in your codes will cause the module not to work correctly.
Requirements: - Open UI 4.723+
This module requires that you have OpenUI installed in your store. The module uses hook points in the OpenUI. You must have OpenUI version 4.723 or higher if you plan to use the OpenToken functionality available in this module. Please see the OpenUIsite for information about latest versions and bug fixes.
- Miva Empressa 3.96+
This module requires that you have Miva Empressa 3.96 or higher. The module uses functionality that is only available in newer versions of the Empressa Engine. Miva regularly releases new versions of Miva Empressa and the Virtual Machine to add new functionality and fix bugs. If you are on an older version, consider contacting your hosting company. You can find the Miva Empressa version at the top left hand of your Store Administrator when you first login. It should show your Miva Merchant version and your Miva Empressa version.
- Miva Merchant 2.x, 3.x, and 4.x
This module should work with most versions of Miva Merchant. In order to use the deactivate product option, you must be on version 3.0+. All testing and development was done on versions 4.13+.
Global Configuration Screen All inventory settings will use the global configuration settings found in the Miva Merchant Administration area under Stores > Your Store > System Extension Configuration > NetPush Advanced Inventory. One may override these settings for products (see product level settings below). Each product must also be manually turned on before tracking starts. See product settings below.
Configuration Settings
- Use NetPush Inventory
You must set this to "Yes" if you want the module to be turned on. If this is set to "No", the module will not do anything.
- Amount considered out of stock
Usually this would be 0, but it can be set to any number, including negative numbers. Once the stock level reaches this number, it will be considered out of stock.
- Deactivate when product level is out of stock
In Miva Merchant versions that support it, the module will turn the Active flag for a product to off, if the product reaches the out of stock level. This only works on the product level, not for the attribute/option level.
- Allow purchase even after out of stock
Turning this on will allow customers to purchase products even after they go below the out of stock level. This could be a backorder situation.
- Automatically remove from basket
When a user adds products to the basket, the products will be removed if it makes the inventory go below the out of stock level and the admin is not allowing purchases when products are out of stock. Please take note that this option could cause problems if other modules are installed that also act on the basket.
- Send Low Inventory Notices
Turn this on to receive email warnings when inventory goes below the low inventory level.
- Amount considered low
The level that is considered low. Use this setting to trigger emails that will warn you when inventory is hitting a low level.
- Low Email To Address
Set this to the email address of the person who should be receiving emails when stock is at a low level.
- Low Email From Address
Set this to the email address that should be set as the from address in low stock emails.
- Low Email Subject
The subject of the low stock email. This field has token replacement.*
- Low Email Body
This is the body of the low stock email. This field has token replacement.*
- Automatically change stock levels
Turn this on if you want the system to subtract stock when a user purchases. If this is set to "No", the system will not update stock levels.
- Show out of stock messages
Turn this on to show out of stock messages on the product page when stock goes below the out of stock level.
- Show in stock messages
Turn this on to show how much stock is left on the product page.
Out of Stock Messages* - Product Level
This message is shown to the user on the product page below the shipping weight.
- Attribute Level - Checkbox
This message is shown to the user on the product page next to a checkbox option.
- Attribute Level - Radio Buttons
This message is shown to the user on the product page next to each radio button option.
- Attribute Level - Select Box
This message is shown inside of the drop down on a select box. HTML should not be used here.
In Stock Messages* - Product Level
This message is shown to the user on the product page below the shipping weight.
- Attribute Level - Checkbox
This message is shown to the user on the product page next to a checkbox option.
- Attribute Level - Radio Buttons
This message is shown to the user on the product page next to each radio button option.
- Attribute Level - Select Box
This message is shown inside of the drop down on a select box. HTML should not be used here.
Other Messages* - Out of Stock - Basket Line Marker
This helps the user to see which products have gone out of stock when looking at the basket. A red asterisks may be a good indicator for the user.
- Out of Stock - Basket
This message is shown to the user above the basket when a product has gone out of stock when adding, updating, or looking at the basket. Products can go out of stock at anytime, even after a user adds it to their basket. This is because stock levels only change after checkout.
- Out of Stock - Checkout
This message is similar to the out of stock basket message. It is shown on the payment screen during checkout. This should be considered one final inventory check before allowing the user to purchase.
* Token Replacement
This module has a few built in tokens for messages that allow you to give yourself and the user more detailed information. Some of the tokens below can only be used on certain screens, or in emails.
%%stock%% - Displays the current stock level. (1,2,3)
%%basket_quantity%% - Displays the amount in the basket and is unlikely to be used. (1,2)
%%available%% - Displays the amount of stock left before hitting the out of stock level. (1,2,3)
%%oos_level%% - Displays the out of stock level. (1,2,3)
%%line_items%% - Displays a list of line items that are effected. (1,2)
%%product_id%% - Displays the product id. (1,2,3)
'%%product_code%% - Displays the product code. (1,2,3)
%%product_name%% - Displays the product name if available. (3)
%%attribute_code%% - Displays the attribute code, or None if the effected product is only being tracked at the product level. (1,2)
%%option_code%% - Displays the option code, or None if the affected product is only being tracked at the product level. (1,2)
1. Is used for the low stock email body and subject
2. Is used for the out of stock basket message and out of stock checkout message
3. Is used for the in stock and out of stock messages on the product pages.
Product Configuration Screen All inventory settings will use the global configuration settings found in
the Miva Merchant Administration area under Stores > Your Store > System Extension Configuration > NetPush Advanced Inventory. To override these settings at the product level, go to the product in the administration area and click on "NetPush Advanced Inventory". You will see the settings below. Configuration Settings
- Use NP Inventory on this Product
You must set this to "Yes" if you want to track inventory on the product. You must manually set this to "Yes" for every product that you want to track. If this is not set to "Yes", no inventory tracking will take place. By default, no product is tracked.
- Override Global Settings
If this is set to "Yes" the configurations settings will be taken from the individual product screen instead of from the Global configuration settings found under under system extension configuration. If set to "No", the module will use the global settings from above when doing inventory for the product. The default is to use the global settings.
- Amount considered out of stock
Overrides same setting under Global Configuration.
- Deactivate when product level is out of stock
Overrides same setting under Global Configuration.
- Allow purchase even after out of stock
Overrides same setting under Global Configuration.
- Automatically remove from basket
Overrides same setting under Global Configuration.
- Send Low Inventory Notices
Overrides same setting under Global Configuration.
- Amount considered low
Overrides same setting under Global Configuration.
- Low Email To Address
Overrides same setting under Global Configuration.
- Low Email From Address
Overrides same setting under Global Configuration.
- Low Email Subject
Overrides same setting under Global Configuration.
- Low Email Body
Overrides same setting under Global Configuration.
- Automatically change stock levels
Overrides same setting under Global Configuration.
- Show out of stock messages
Overrides same setting under Global Configuration.
- Show in stock messages
Overrides same setting under Global Configuration.
Out of Stock Messages* - Product Level
Overrides same setting under Global Configuration.
- Attribute Level - Checkbox
Overrides same setting under Global Configuration.
- Attribute Level - Radio Buttons
Overrides same setting under Global Configuration.
- Attribute Level - Select Box
Overrides same setting under Global Configuration.
In Stock Messages* - Product Level
Overrides same setting under Global Configuration.
- Attribute Level - Checkbox
Overrides same setting under Global Configuration.
- Attribute Level - Radio Buttons
Overrides same setting under Global Configuration.
- Attribute Level - Select Box
Overrides same setting under Global Configuration.
Other Messages* - Out of Stock - Basket Line Marker
Overrides same setting under Global Configuration.
- Out of Stock - Basket
Overrides same setting under Global Configuration.
- Out of Stock - Checkout
Overrides same setting under Global Configuration.
Setting Product Inventory Levels
 The administrator can set product inventory levels by going to the product page within the Miva Merchant admin area and clicking on NetPush Advanced Inventory. This is the same screen as the product level configuration. Product inventory levels are shown below the configuration area. To add new inventory, use the yellow add button. To edit inventory, click white add button next to the inventory entry.
The module checks inventory by looking at a unique combination of Product Code, Attribute Code, and Option Code. When entering stock levels, you enter the codes separated by a pipe. For example, shirt1|color|red, where shirt1 is the product code, color is the attribute code, and red is the option code. If you do not set an inventory level for an existing product attribute combination, no tracking is done. Setting a stock level of -9999 has the same effect. Inventory at a product level
You may choose to only track inventory at a product level in combination with or not at an attribute level. To enter a stock level for a product, simply use prodcode||. This tells the system that you are tracking the product code, but not the attributes or options by leaving them blank. Using -9999 for a stock level will temporarily turn inventory tracking off. Inventory at the attribute level (checkbox, select box, radio buttons)
Checkbox - prodcode|attrcode|(the last field should be left blank, as checkboxes have no options)
Select Box and Radio Buttons - prodcode|attrcode|optcodeAll 3 are required and must be unique, even if you are using attribute templates. If you are using normal templates in combination with attribute templates, make sure you do not give them duplicate code names.
Using Advanced Inventory with Template Modules and OpenTokens
The Advanced Inventory Module can be used with 3rd party template modules like the ones from Viking Coders by using Open UI tokens on product pages to display current inventory levels. Please note that token support has not been completely tested as of yet.
%module|npinventory|stock_level%
Returns the stock level for the product, attribute, option combination. To ensure that this works correctly, you should set g.NPI_Product_Code, g.NPI_Attribute_Code, and g.NPI_Option_Code to the current product code, attribute code, and option code. On a checkbox, make sure to set g.NPI_Option_Code = ''. On a product level, make sure to set the attribute and option variables to ''. After these globals are set, call the token. If the return value is -9999, the item is not being tracked.
%module|npinventory|stock_available%
Same as above but shows the amount available.
%module|npinventory|oos_level%
Same as above but shows the out of stock level. %module|npinventory|stock_list%
This token will set a global variable that contains an array of structures. You must set g.NPI_Product_Code equal to the current product code before calling the token. This array contains all of the product code, attribute code, and option code combinations for a specific product. It also contains the available stock, out of stock level, and other information shown below. This token makes it easy to create a stock table using OpenUI tokens in Viking Coders templates or in a product header or footer. Code examples are available in the help pages on the NetPush.com site.
Array Structure:
g.NP_Inventory_StockList[i]:attribute_code - Attribute Code
g.NP_Inventory_StockList[i]:option_code - Option Code
g.NP_Inventory_StockList[i]:stock_level - Stock Level
g.NP_Inventory_StockList[i]:oos_level - Out of stock level
g.NP_Inventory_StockList[i]:available - Stock Level minus out of stock level
g.NP_Inventory_StockList[i]:allow_pur - Allow purchases even if out of stock from admin settings
g.NP_Inventory_StockList[i]:low_amount - Low amount from admin settings
g.NP_Inventory_StockListLen - Variable that tells you how many items are in the array (represented by i above)
Price: $149 Upgrade Cost: $0
Upgrade Terms (If Any): N/A
Compatibility: OpenUI Versions:
4.x, 4.14-4.16x (Available Compiled)
Other Module Compatibility: N/A From: Inventory Modules
Relevance: 14.10%% Rating: (0.00) Votes: (0) Hits: (2001) Reviews:
Rate It - Review It - Modify It - Report It Bookmark NetPush Advanced Inventory
<-- Just click this link and then add to your favorites! Back to Top
Calculate shipping by product as a fixed amount or as a percentage of the product's cost AND by the method of shipping AND by the "ship to" State Zone. Each products' shipping cost is summed to arrive at the order's shipping cost. This module provides flexibility to combine flat rate and percentage of subtotal calculations on a product by product basis. The store owner initially sets up the available storewide shipping methods and rates for the store. You can have multiple methods for as many State Zones as you establish. You establish which states belong to which State Zone. You can then let the storewide methods and rates apply to each product in the store or you can establish "Shipping Override" by product or by category. If you desire every product in a category to have a shipping cost different from the storewide costs, you set up that category's "Shipping Override" methods from the Category tab. You can even use some storewide and some category specific. Then if you have specific shipping costs for specific products, you can select the "Shipping Override" tab in the product edit screen. You can use the storewide methods and rates or override with the product specific rate. The product specific rates take precedence over the category specific rates and the category specific rates take precedence over the storewide rates. The "Shipping Override" costs can be set as percentage or fixed amount and need not use the same calculation formula as the storewide calculation for the same method. The "Shipping Override" charges can even be zero so that shipping can be free for certain products or categories. As an example, the store might charge $4.00 for each item for priority mail. However, they may charge 2% of the item's cost in the jewelry category. As the shipping module summed the costs, it would apply the $4.00 to each item that did not have a "Shipping Override". Then it would multiply the 2% times each purchased item's cost in the jewelry category and add it to the sum. The module even provides an input for a handling or base charge. That amount can be different for each method of shipping and is added after all of the individual product shipping charges are summed. Like our other State Zone shipping modules, you can have different methods and rates for different areas of the country. When the customer enters their "ship to" address during checkout, the module determines which shipping methods will be available to that customer. Only methods established for their "ship to" state will be visible in the shipping and payment selection screen. This module is compatible with the MMUI and OpenUI look and feel user interfaces. It is licensed per domain which means if you have multiple stores under one domain, there are no additional license fees for this module within that one domain/mall. Price: $24 Upgrade Cost: $10
Upgrade Terms (If Any): N/A
Compatibility: MMUI/OpenUI Versions:
3.x, 4.x, 4.14-4.16x (Available Compiled)
Other Module Compatibility: N/A From: Shipping Modules / Shipping by Product or Category Modules
Relevance: 11.25%% Rating: (0.00) Votes: (0) Hits: (1298) Reviews:
Rate It - Review It - Modify It - Report It Bookmark Shipping by Product by State Zone
<-- Just click this link and then add to your favorites! Back to Top
Calculate shipping by product as a fixed amount or as a percentage of the product's cost AND by the method of shipping AND by the "ship to" World Zone. Each products' shipping cost is summed to arrive at the order's shipping cost. This module provides flexibility to combine flat rate and percentage of subtotal calculations on a product by product basis. The store owner initially sets up the available storewide shipping methods and rates for the store. You can have multiple methods for as many World Zones as you establish. You establish which countries belong to which World Zone. You can then let the storewide methods and rates apply to each product in the store or you can establish "Shipping Override" by product or by category. If you desire every product in a category to have a shipping cost different from the storewide costs, you set up that category's "Shipping Override" methods from the Category tab. You can even use some storewide and some category specific. Then if you have specific shipping costs for specific products, you can select the "Shipping Override" tab in the product edit screen. You can use the storewide methods and rates or override with the product specific rate. The product specific rates take precedence over the category specific rates and the category specific rates take precedence over the storewide rates. The "Shipping Override" costs can be set as percentage or fixed amount and need not use the same calculation formula as the storewide calculation for the same method. The "Shipping Override" charges can even be zero so that shipping can be free for certain products or categories. As an example, the store might charge $4.00 for each item for priority mail. However, they may charge 2% of the item's cost in the jewelry category. As the shipping module summed the costs, it would apply the $4.00 to each item that did not have a "Shipping Override". Then it would multiply the 2% times each purchased item's cost in the jewelry category and add it to the sum. The module even provides an input for a handling or base charge. That amount can be different for each method of shipping and is added after all of the individual product shipping charges are summed. Like our other World Zone shipping modules, you can have different methods and rates for different areas of the World. When the customer enters their "ship to" address during checkout, the module determines which shipping methods will be available to that customer. Only methods established for their "ship to" country will be visible in the shipping and payment selection screen. This module is compatible with the MMUI and OpenUI look and feel user interfaces. It is licensed per domain which means if you have multiple stores under one domain, there are no additional license fees for this module within that one domain/mall. Price: $24 Upgrade Cost: $10
Upgrade Terms (If Any): N/A
Compatibility: MMUI/OpenUI Versions:
3.x, 4.x, 4.14-4.16x (Available Compiled)
Other Module Compatibility: N/A From: Shipping Modules / Shipping by Product or Category Modules
Relevance: 11.25%% Rating: (0.00) Votes: (0) Hits: (1317) Reviews:
Rate It - Review It - Modify It - Report It Bookmark Shipping by Product by World Zone
<-- Just click this link and then add to your favorites! Back to Top
Calculate shipping by product as a fixed amount or as a percentage of the product's cost AND by the method of shipping AND by the "ship to" ZIP Code Zone. Each products' shipping cost is summed to arrive at the order's shipping cost. This module provides flexibility to combine flat rate and percentage of subtotal calculations on a product by product basis.
Easy admin configuration of per product shipping charges.
The store owner initially sets up the available storewide shipping methods and rates for the store. You can
have multiple methods for as many ZIP Code Zones as you establish. You establish which ZIP Codes belong to
which ZIP Code Zone. You can then let the storewide methods and rates apply to each product in the store or
you can establish "Shipping Override" by product or by category. If you desire every product in a category to
have a shipping cost different from the storewide costs, you set up that category's "Shipping Override"
methods from the Category tab. You can even use some storewide and some category specific. Then if you
have specific shipping costs for specific products, you can select the "Shipping Override" tab in the product
edit screen. You can use the storewide methods and rates or override with the product specific rate. The
product specific rates take precedence over the category specific rates and the category specific rates take
precedence over the storewide rates.
Fixed cost or percentage of item price.
The "Shipping Override" costs can be set as percentage or fixed amount and need not use the same
calculation formula as the storewide calculation for the same method. The "Shipping Override" charges can
even be zero so that shipping can be free for certain products or categories. As an example, the store might
charge $4.00 for each item for priority mail. However, they may charge 2% of the item's cost in the jewelry
category. As the shipping module summed the costs, it would apply the $4.00 to each item that did not
have a "Shipping Override". Then it would multiply the 2% times each purchased item's cost in the jewelry
category and add it to the sum.
Handling charge option.
The module even provides an input for a handling or base charge. That amount can be different for each
method of shipping and is added after all of the individual product shipping charges are summed.
Display this module's shipping methods based on destination.
Like our other ZIP Code Zone shipping modules, you can have different methods and rates for different areas of
the country. When the customer enters their "ship to" address during checkout, the module determines which
shipping methods will be available to that customer. Only methods established for their "ship to" ZIP Code will
be visible in the shipping and payment selection screen. The module uses the first 3 numbers of the ZIP Code
to match with the zones.
Individual ZIP codes or ranges and variable length codes.
The module for compiled Merchant (4.14 and newer) can use ZIP code ranges in lieu
of individual ZIP codes. It also has the ability to use the
first 5 digits instead of the first 3 digits of the ZIP codes. Price: $18 Upgrade Cost: $10
Upgrade Terms (If Any): N/A
Compatibility: MMUI/OpenUI Versions:
3.x, 4.x, 4.14-4.16x (Available Compiled)
Other Module Compatibility: N/A From: Shipping Modules / Shipping by Product or Category Modules
Relevance: 11.25%% Rating: (0.00) Votes: (0) Hits: (1301) Reviews:
Rate It - Review It - Modify It - Report It Bookmark Shipping by Product by Zip Code Zone
<-- Just click this link and then add to your favorites! Back to Top
Smart Products allows products to have pricing on their own set of rules.
Beads and jewels module allows for Pricing on Color / Size combinations. Infinite size options per product, and 58 colors already available for selection. See it in action here.
Wood module will accept partial, fractional, and decimal quantities. This module is not for everyone. Currently set-up to price by cut length, and also predefined lengths. Contains import and export ability for prices by code, and also weights for different sets of sub products. Shows an ability to price per inch, per foot, per yard. Can be customized for many uses. See it in action here.
Apparel module allows 'Auto Fill' of available colors for items, depending on the size selected! See it in action here. Infinit sizes and colors. Pricing is by size, with the colors available configurable. This module helps to offer Multiple Sizes and Colors from one product that would usually take many products to acheive. It is a fact that for each size of an item, the colors available will vary. Will work for pants, shorts, shirts, jackets, gloves, hats, shoes, belts - most apparell items.
If you are unsure about the suitability for your application, please feel free to ask for more details.
Each of the above sets, or custom module sets come complete with Import and Export Modules to make getting the option data into and out of your store very easy.
Beads OUI 4.00-4.13 (+ $90)
Beads OUI 4.14+ Compiled (+ $90)
Wood OUI 4.00-4.13 Only
Apparel OUI 4.00-4.13 (+ $190)
Apparel OUI 4.14+ Compiled) (+ $190) Price: $120.20 Upgrade Cost: $0
Upgrade Terms (If Any): N/A
Compatibility: OpenUI Versions:
4.x
Other Module Compatibility: N/A From: Special Pricing Hide Prices Modules
Relevance: 11.25%% Rating: (10.00) Votes: (1) Hits: (1461) Reviews:
Rate It - Review It - Modify It - Report It Bookmark Smart Products (Auto Attributes and Pricing)
<-- Just click this link and then add to your favorites! Back to Top
Show customers the actual price they will pay! Customers order more, and more frequently when its easy for them to know what the price of a product is going to be. Dynamic Attribute Pricing will do just that, reqardless of how your pricing is assigned. Dynamic Attribute Pricing shows your customers to total price of the product they want to order, even when that product's attributes and options add to or subtract from the initial price. This module is compatible with OpenUI or Viking Coder's Category Page Templates and Product Page Templates. With OpenUI, a "Total Price: " display appears above the add quantity to basket button. With VikingCoder's Templates, you have place the Total Price: token and add to basket button anywhere you want in the templates. The displayed total changes with option selections that have an associate price increase (decrease) and with the quantity select. With either OpenUI or Template, the module will automatically add any additional price associated with the option, to the display of the option. For example:
Some Option ($2.00). To control the quantity a customer can order, the module presents a tab in the Add/Edit Product screen. This tab shows the following options: For example, if you entered 3,6,9,12,15,18, etc, the customer could only order in multiples of 3. Will also allow image swapping with CPT and PPT! You can display a larger image for attributes where the product image is by including name="PRODImage" with your product image code. Price: $89.99 Upgrade Cost: $0
Upgrade Terms (If Any): N/A
Compatibility: OpenUI Versions:
4.x, 4.14-4.23x (Available Compiled)
Other Module Compatibility: N/A From: Attributes Modules / Attributes Price Display Modules
Relevance: 9.67%%  Rating: (0.00) Votes: (0) Hits: (1513) Reviews:
Rate It - Review It - Modify It - Report It Bookmark Dynamic Attribute Pricing
<-- Just click this link and then add to your favorites! Back to Top
Wholesale Pricing
Pre-Docs Sale......
Your client can login and get the price you've negotiated or assigned to them. You can have unlimited amount of price lists.
EXAMPLE: Client A can get Product A for $99.95. Client B can get Product A for $109.95 while the customer that hasn't negotiated with you and logs in, or not, gets the default price of Product A at $129.95.
Requirements: MM 4.14 or greater / OpenUI / ftp access to your stores mivadata folder.
Pre-Documentation Benefits of the module: Your client can login and get the price you've negotiated or assigned to them. You can have unlimited amount of price lists. In other words: Client A can get Product A for $99.95. Client B can get Product A for $109.95 while the customer that hasn't negotiated with you and logs in, or not, gets the default price of Product A at $129.95. How module works: Admin: During install, the module creates example files, customer.dat and pricelist.dat. The Admin or store operator edits these files and places them back in the IDS_WHOLESALE folder -- probably via FTP. You add Customer logins and a price list filename to the customer.dat file. The customer.dat filename is assigned in the System admin. Also, the filename doesn't have to be customer.dat. On Linux/Unix(and maybe some Winserver configs), you will need to beware of case in the filenames. We suggest to keep lowercase filenames. The pricelist.dat is the referenced file that stores the prices of any or all the products available to this list. There can be more than one list -- as many as you need. The customer.dat points the specific user to a a specific list. The list stores specific prices to specific products.There is no calculation in terms of percentages, etc. End User: When your customer/client logs in, they will see the product price display based on the assigned list. If the user is in the customer.dat file with an assigned pricelist filename, product price will be from the price list instead of the MM product database. If a product is NOT in the assigned list, the products displayed price will be the default from the stores product database. If the user isn't in your customer.dat, they will only see default pricing from the stores products database. +++++++++++++++++++++++++++++++++++++++ File format and details The "example" customer.dat. Does not have to be named customer.dat. Requires 1 user per line Users login | Assigned pricelist onlineuser1|ballcaps onlineuser2|shoes The "example" pricelist.dat file pricelist_filename|product_code|price pricelist|prcodeA|99.95 A different price list file: with the same product pricelist_filename|product_code|price pricelist2|prcodeA|109.95 ++++++++++++++++++++++++++++++++++++++++++ Other 3rd Party Display Systems Some 3rd party systems will take over the display of certain elements of the MM/OpenUI screen. Most will allow you to place OpenTokens. The variable available to use in an OpenToken to display the price lists price is: g.OUIX_formatted_adjusted_price. Example: %VAR(g.OUIX_formatted_adjusted_price)%. In the case of VC Cat templates, You would place this where ever in the template you would place the default product price token. Price: $144.95 Upgrade Cost: $0
Upgrade Terms (If Any): N/A
Compatibility: OpenUI Versions:
4.14-4.24x (Available Compiled)
Other Module Compatibility: N/A From: Discount Modules
Relevance: 9.67%% Rating: (0) Votes: (0) Hits: (1044) Reviews:
Rate It - Review It - Modify It - Report It Bookmark Wholesale Pricing
<-- Just click this link and then add to your favorites! Back to Top
This OpenUI extension module sets the products in your store to display a striked-thru retail price when the current price (using Price Groups or DiscountTrkPro) is less. Will automatically display the normal price (with strike-thru formattig), the shopper's special price, as well as their savings (both the dollar savings and percentage savings). Price: $17.95 Upgrade Cost: $0
Upgrade Terms (If Any): Terms
Compatibility: MMUI/OpenUI Versions:
2.x, 3.x, 4.x, 4.14-4.16x (Available Compiled)
Other Module Compatibility: N/A From: Discount Modules / Show Discount Modules
Relevance: 9.67%% Rating: (0.00) Votes: (0) Hits: (1108) Reviews:
Rate It - Review It - Modify It - Report It Bookmark Strike-Thru Pricing
<-- Just click this link and then add to your favorites! Back to Top
Your client can login and get the price you've negotiated or assigned to them. You can have unlimited amount of price lists.
EXAMPLE: Client A can get Product A for $99.95. Client B can get Product A for $109.95 while the customer that hasn'tnegotiated with you and logs in, or not, gets the default price of Product A at $129.95.
Requirements: compiled Merchant 4/CBS Dynamic Templates/ftp access to your stores mivadata folder. Tokens for use in DT are explained in the Tokens_readme.txt available in the distribution.
Pre-Documentation Benefits of the module: Your client can login and get the price you've negotiated or assigned to them. You can have unlimited amount of price lists. In other words: Client A can get Product A for $99.95. Client B can get Product A for $109.95 while the customer that hasn't negotiated with you and logs in, or not, gets the default price of Product A at $129.95. How module works: Admin: During install, the module creates example files, customer.dat and pricelist.dat. The Admin or store operator edits these files and places them back in the IDS_WHOLESALE folder -- probably via FTP. You add Customer logins and a price list filename to the customer.dat file. The customer.dat filename is assigned in the System admin. Also, the filename doesn't have to be customer.dat. On Linux/Unix(and maybe some Winserver configs), you will need to beware of case in the filenames. We suggest to keep lowercase filenames. The pricelist.dat is the referenced file that stores the prices of any or all the products available to this list. There can be more than one list -- as many as you need. The customer.dat points the specific user to a a specific list. The list stores specific prices to specific products.There is no calculation in terms of percentages, etc. End User: When your customer/client logs in, they will see the product price display based on the assigned list. If the user is in the customer.dat file with an assigned pricelist filename, product price will be from the price list instead of the MM product database. If a product is NOT in the assigned list, the products displayed price will be the default from the stores product database. If the user isn't in your customer.dat, they will only see default pricing from the stores products database. Price: $144.95 Upgrade Cost: $0
Upgrade Terms (If Any): N/A
Compatibility: OpenUI Versions:
4.14-4.24x (Available Compiled)
Other Module Compatibility: N/A From: Account Screen Modules
Relevance: 8.08%% Rating: (0.00) Votes: (0) Hits: (954) Reviews:
Rate It - Review It - Modify It - Report It Bookmark Wholesale Pricing DT
<-- Just click this link and then add to your favorites! Back to Top
Override the order minimums for specific products. This allows you to use the standard order minimums settings in Miva Merchant admin. You can specify products which can be ordered that do not contribute to the order minimums. However, if they are the only items in the order, then the minimum requirement is removed. This allows you to have free items or low cost samples in an order and the customer will not have to meet the minimum quantity or amount that you have established for normal orders. If any products are in the basket that are not exempted, then the established order minimum will apply as if this module did not exist. This module requires use of the OpenUI user interface. Price: $15 Upgrade Cost: $0
Upgrade Terms (If Any): N/A
Compatibility: OpenUI Versions:
4.14-4.16x (Available Compiled)
Other Module Compatibility: N/A From: Minimum Maximum Modules
Relevance: 8.08%% Rating: (0.00) Votes: (0) Hits: (1546) Reviews:
Rate It - Review It - Modify It - Report It Bookmark Minimum Override
<-- Just click this link and then add to your favorites! Back to Top
Charge your customers by the variable size of the item they are ordering. This module is used to calculate prices on items which are priced, e.g. by the foot, by the inch, or other units of measure. This is particularly useful when the store owner does not want to have a pull down select list of infinite values. The module also eliminates the common hack that stores have used which involved using the number of the items added to the basket to adjust charges. This module allows the customer to specify two dimensions (e.g. length and width) as item attributes on the product screen (PROD) and still be able to order more than one of that item. Not for upsell products. For example, ordering four 8" X 10" picture frames involves entering 8 in the length attribute and 10 in the width attribute and entering 4 in the add to basket quantity input. The store owner determines the storewide number of free units (if any), e.g. square inches, and the lowest and the highest values that can be used in the measurement. The store owner can also use price groups to vary the dimension pricing for applicable customers. The attributes type is usually text but could be select list pull down. It cannot be a template. The attribute prompts can read whatever the store owner desires to direct the customer to enter the numeric measurement. If you are using our Attribute Prompt vs Code module, that prompt will also display on the basket, invoice and emails instead of the attribute code. The store owner's settings are configured in admin. The customer enters the dimensions to form the combined units (e.g. square inches) and the module calculates the price based on the calculated units times the price of the first dimension attribute. Version 4.x Available Price: $25 Upgrade Cost: $5
Upgrade Terms (If Any):
Compatibility: MMUI/OpenUI Versions:
4.14-4.16x (Available Compiled)
Other Module Compatibility: N/A From: Special Pricing Hide Prices Modules
Relevance: 8.08%% Rating: (0.00) Votes: (0) Hits: (1519) Reviews:
Rate It - Review It - Modify It - Report It Bookmark Dimension Pricing
<-- Just click this link and then add to your favorites! Back to Top
Charge your customers by the number of letters or words customers include in a textfield attribute called PHRASE-L or PHRASE-W respectively. This module is used to calculate individual entity pricing for engraving, embroidering, etc. In Merchant version 3.x, the phrase can be in either a text input or textarea input. In Merchant version 2.2x, the text input is the only attribute available. The customer enters the phrase and the module calculates the price based on the number of letters/words and the base price of the attribute. The store owner determines if it will be a word count or letter count by the attribute code, i.e. PHRASE-W or PHRASE-L. Not for upsell products. Versions 2.x, 3.x, 4.x Available Price: $20 Upgrade Cost: $5
Upgrade Terms (If Any): For 4.x Only Compatibility: MMUI/OpenUI Versions:
4.14-4.16x (Available Compiled)
Other Module Compatibility: N/A From: Special Pricing Hide Prices Modules
Relevance: 8.08%% Rating: (0.00) Votes: (0) Hits: (1323) Reviews:
Rate It - Review It - Modify It - Report It Bookmark Entity Count Pricing
<-- Just click this link and then add to your favorites! Back to Top
Charge your customers by the number of letters or words customers include in a text field attribute called PHRASE-L or PHRASE-W respectively. This module is used to calculate individual entity pricing for engraving, embroidering, etc. The attribute can be in either a text input or textarea input. This module is for MIVA Merchant 5.x. We also have the corresponding module for an older version of Merchant.The customer enters the phrase and the module calculates the price based on the number of letters/words and the base price of the attribute. The store owner determines if it will be a word count or letter count by the attribute code, i.e. PHRASE-W or PHRASE-L. Not for upsell products. The module currently fully supports the mivasql configuration of MIVA Merchant 5. It also supports MySQL as long as load balancing has the data stored on the single MySQL server. This would be the case in most of the server setups. For those that are not, we are in the process of converting the code for that remaining, very small group of MIVA Merchant stores. At this time we have not had a problem. Modules will be moved to the top of the queue as needed. Price: $22.95 Upgrade Cost: $0
Upgrade Terms (If Any): N/A
Compatibility: N/A Versions:
5.x+
Other Module Compatibility: N/A From: Special Pricing Hide Prices Modules
Relevance: 8.08%% Rating: (0) Votes: (0) Hits: (972) Reviews:
Rate It - Review It - Modify It - Report It Bookmark Entitiy Count Pricing v5
<-- Just click this link and then add to your favorites! Back to Top
Full control of the look of your category pages! The module lets you configure the category page html to your liking. It provides an interface for you to enter the specific HTML that you want to use to display the product listing for the category. You create templates which you can then assign to selected categories. The module comes with 4 preinstalled templates but you can add as many as you want. One of the preinstalled template provides for a category display that lets you add all of the listed products to your basket with the click of a single button. Another provides for the display of multiple products in rows across the page instead of vertically. In your templates, you can use tokens to represent the normal Merchant product and category fields. For example, you can use the token %prodname% to represent where you want the product's name to be displayed. Making changes like removing the "buy one now" button is as simple as tweaking the HTML used to display the page. One of the preinstalled templates is identical to the standard Merchant category display and serves as a good starting point for those little tweaks you have always been wanting to make. The module also permits you to copy existing templates when you are creating a new template. You can use strike-thru pricing with this module too! Note about compatibility with other modules: This module totally replaces the portion of the OpenUI (or MMUI if you are using it) that displays the Category page and is not compatible with any other module which modifies the category page unless the developer of that module has specifically made their module compatible. This module provides for an easy-to-use manner for developers to provide tokens that can be used to insert their module's HTML into the pages. And these tokens can be registered in the module's admin interface. All VikingCoders.com's modules are compatible with this module (ie. there are tokens that can be used to display their information on the category page) or soon will be. Another note about compatibility: This module is compatible with the OpenUI right out of the box. However, for it to be compatible with the MMUI requires a minor modification to the MMUI file (ie. mmui.mv). Version 3.x Available Price: $44.95 Upgrade Cost: $14
Upgrade Terms (If Any): N/A
Compatibility: MMUI/OpenUI Versions:
4.x, 4.14-4.16x (Available Compiled)(OpenUI Required)
Other Module Compatibility: Is compatible with Display Wizard Pro. From: Category Screen Modules
Relevance: 6.50%% Rating: (10.00) Votes: (5) Hits: (3745) Reviews:
Rate It - Review It - Modify It - Report It Bookmark Category Page Templates
<-- Just click this link and then add to your favorites! Back to Top
Now you can easily customize and display varying price and cost fields. With Price Wizard, you can opt to display the price field, cost field or another field calculated by both price and cost fields. You can optionally show customers their overall savings on a per product basis. Price information can be optionally displayed on product, category, product list or search screens. Price: $29.95 Upgrade Cost: $15
Upgrade Terms (If Any): N/A
Compatibility: OpenUI Versions:
3.x, 4.x, 4.14-4.16x (Available Compiled)
Other Module Compatibility: N/A From: Discount Modules / Show Discount Modules
Relevance: 6.50%% Rating: (0.00) Votes: (0) Hits: (1028) Reviews:
Rate It - Review It - Modify It - Report It Bookmark Price Wizard
<-- Just click this link and then add to your favorites! Back to Top
Displays MSRP, Savings and Price 3 ways: 1. Use the Cost field to set MSRP and display savings as difference or Percentage.
2. Use a Percent markup over Price to extablish MSRPand display savings as difference or Percentage.
3. Use Price Groups to set discount and display normal price as MSRP and savings the difference between Price and Adjusted Price.
* 4. Use both Group Method and Price Methods simultaneously.
* Display MSRP with or without strike through.
* Create your own labels for "MSRP", "Savings" and "Your Price".
* Font size, color and bold control.
* Select screens to display the above information.
Independent and simultaneous control over Flagged Products Supress Price on Flagged Products * Designate specific products not to display price.
* Replace Price with your message on flagged products.
* Replace Price for Flagged Products with HTML link.
* Replace Price with Email link (adds Product Code and Name to Subject line.)
* Select screens to display the above information.
* Supress "Add" and "Buy"Buttons.
Independent and simultaneous control over products with a Price of Zero * Create your own message to replace "Price".
* Email link includes Product Code and Name in Subj Line.
* Replace 0.00 Price with an HTML link to another page.
* Select screens to display the above information.
* Remvoe "Add" and "Buy" buttons.
Forced Login controlled by two methods: * No Access without Login at all.
* Suppress Price, Add to Basket and Buy Buttons.
* Place Order without Account suppression optional
* Create New Account suppression optional. Price: $44.95 Upgrade Cost: $20
Upgrade Terms (If Any): N/A
Compatibility: OpenUI Versions:
4.x, 4.14-4.16x (Available Compiled)
Other Module Compatibility: N/A From: Discount Modules / Show Discount Modules
Relevance: 6.50%% Rating: (0.00) Votes: (0) Hits: (1253) Reviews:
Rate It - Review It - Modify It - Report It Bookmark Price Wizard Professional
<-- Just click this link and then add to your favorites! Back to Top
|
