Found 79 Modules or Applications that might fit the bill
Use caution when considering any modules from modStop. Their support has been reported by umpteen Miva Merchant users as suspect and worse. Some of their modules are simple and shouldn't require support. Please contact us with any questions concerning them or their modules.
Set Next Order System makes it easy to set the next Order Number you wish to use in your store. It also provides an option to eliminate orphaned order numbers so they aren't used again.
The NetPush Advanced Inventory Module allows Miva Merchant store owners to track inventory within Miva Merchant all the way down to the attribute/option level. The module has numerous configuration settings that should allow the admin to display and track any simple or complex inventory configuration. Inventory levels are only adjusted at checkout time so there is no need to worry about old baskets causing inventory problems. The module comes with an import and export module that allows administrators to easily update inventory levels by using csv files.
We suggest using template modules like Viking Coder's Product Templates and
Category Templates if you want better control of the look and feel of your pages with regards to inventory. This will allow you to use tokens for display. Otherwise, you will have to settle for built in hook point displays that are built into the module and are configurable through the administration area.
The Advanced Inventory Module will send email when stock goes below certain configurable low stock level and can disable products when stock goes below the out of stock level. Administrators can also customize every message shown to the user. Fine grain customizations are made easy because the module allows product level configuration settings the ability to override global inventory configuration settings. This allows Miva Merchant Administrators the ability to customize inventory configurations for every product, if he or she wishes.
Notes:
OpenUI Tokens This module can be used with OUI OpenTokens. To use the module with Viking Coders template modules, see the OpenToken instructions and examples in the documentation on the NetPush.com site.
Product Upsell This module does not show stock information on the product upsell screens at this time. Stock is still tracked in the basket and checkout, but no current stock level is shown on the upsell screens during checkout unless you are using alternatives like tokens in templates.
Basket Redirect and Error Message The user is automatically redirected to the basket screen if he or she adds items to the basket that makes the product go out of stock or if the product is already out of stock. The error message is shown above the basket screen using a hook point in the Open UI. The message is configurable in the admin area.
Checkout Screen Error If configuration is setup to do so, the module will block a user from checking out if their basket has an item that is out of stock. This message is shown automatically at the top of the screen. The message is configurable in the admin area.
Pipes ( | ) Product codes, attribute codes, and option codes must not contain the pipe character. NetPush Advanced Inventory uses the pipe to delimit for lookups. Pipes in your codes will cause the module not to work correctly.
Requirements:
Open UI 4.723+ This module requires that you have OpenUI installed in your store. The module uses hook points in the OpenUI. You must have OpenUI version 4.723 or higher if you plan to use the OpenToken functionality available in this module. Please see the OpenUIsite for information about latest versions and bug fixes.
Miva Empressa 3.96+ This module requires that you have Miva Empressa 3.96 or higher. The module uses functionality that is only available in newer versions of the Empressa Engine. Miva regularly releases new versions of Miva Empressa and the Virtual Machine to add new functionality and fix bugs. If you are on an older version, consider contacting your hosting company. You can find the Miva Empressa version at the top left hand of your Store Administrator when you first login. It should show your Miva Merchant version and your Miva Empressa version.
Miva Merchant 2.x, 3.x, and 4.x This module should work with most versions of Miva Merchant. In order to use the deactivate product option, you must be on version 3.0+. All testing and development was done on versions 4.13+.
Global Configuration Screen
All inventory settings will use the global configuration settings found in the Miva Merchant Administration area under Stores > Your Store > System Extension Configuration > NetPush Advanced Inventory. One may override these settings for products (see product level settings below). Each product must also be manually turned on before tracking starts. See product settings below.
Configuration Settings
Use NetPush Inventory You must set this to "Yes" if you want the module to be turned on. If this is set to "No", the module will not do anything.
Amount considered out of stock Usually this would be 0, but it can be set to any number, including negative numbers. Once the stock level reaches this number, it will be considered out of stock.
Deactivate when product level is out of stock In Miva Merchant versions that support it, the module will turn the Active flag for a product to off, if the product reaches the out of stock level. This only works on the product level, not for the attribute/option level.
Allow purchase even after out of stock Turning this on will allow customers to purchase products even after they go below the out of stock level. This could be a backorder situation.
Automatically remove from basket When a user adds products to the basket, the products will be removed if it makes the inventory go below the out of stock level and the admin is not allowing purchases when products are out of stock. Please take note that this option could cause problems if other modules are installed that also act on the basket.
Send Low Inventory Notices Turn this on to receive email warnings when inventory goes below the low inventory level.
Amount considered low The level that is considered low. Use this setting to trigger emails that will warn you when inventory is hitting a low level.
Low Email To Address Set this to the email address of the person who should be receiving emails when stock is at a low level.
Low Email From Address Set this to the email address that should be set as the from address in low stock emails.
Low Email Subject The subject of the low stock email. This field has token replacement.*
Low Email Body This is the body of the low stock email. This field has token replacement.*
Automatically change stock levels Turn this on if you want the system to subtract stock when a user purchases. If this is set to "No", the system will not update stock levels.
Show out of stock messages Turn this on to show out of stock messages on the product page when stock goes below the out of stock level.
Show in stock messages Turn this on to show how much stock is left on the product page.
Out of Stock Messages*
Product Level This message is shown to the user on the product page below the shipping weight.
Attribute Level - Checkbox This message is shown to the user on the product page next to a checkbox option.
Attribute Level - Radio Buttons This message is shown to the user on the product page next to each radio button option.
Attribute Level - Select Box This message is shown inside of the drop down on a select box. HTML should not be used here.
In Stock Messages*
Product Level This message is shown to the user on the product page below the shipping weight.
Attribute Level - Checkbox This message is shown to the user on the product page next to a checkbox option.
Attribute Level - Radio Buttons This message is shown to the user on the product page next to each radio button option.
Attribute Level - Select Box This message is shown inside of the drop down on a select box. HTML should not be used here.
Other Messages*
Out of Stock - Basket Line Marker This helps the user to see which products have gone out of stock when looking at the basket. A red asterisks may be a good indicator for the user.
Out of Stock - Basket This message is shown to the user above the basket when a product has gone out of stock when adding, updating, or looking at the basket. Products can go out of stock at anytime, even after a user adds it to their basket. This is because stock levels only change after checkout.
Out of Stock - Checkout This message is similar to the out of stock basket message. It is shown on the payment screen during checkout. This should be considered one final inventory check before allowing the user to purchase.
* Token Replacement This module has a few built in tokens for messages that allow you to give yourself and the user more detailed information. Some of the tokens below can only be used on certain screens, or in emails.
%%stock%% - Displays the current stock level. (1,2,3) %%basket_quantity%% - Displays the amount in the basket and is unlikely to be used. (1,2) %%available%% - Displays the amount of stock left before hitting the out of stock level. (1,2,3) %%oos_level%% - Displays the out of stock level. (1,2,3) %%line_items%% - Displays a list of line items that are effected. (1,2) %%product_id%% - Displays the product id. (1,2,3) '%%product_code%% - Displays the product code. (1,2,3) %%product_name%% - Displays the product name if available. (3) %%attribute_code%% - Displays the attribute code, or None if the effected product is only being tracked at the product level. (1,2) %%option_code%% - Displays the option code, or None if the affected product is only being tracked at the product level. (1,2)
1. Is used for the low stock email body and subject 2. Is used for the out of stock basket message and out of stock checkout message 3. Is used for the in stock and out of stock messages on the product pages.
Product Configuration Screen
All inventory settings will use the global configuration settings found in
the Miva Merchant Administration area under Stores > Your Store > System Extension Configuration > NetPush Advanced Inventory. To override these settings at the product level, go to the product in the administration area and click on "NetPush Advanced Inventory". You will see the settings below.
Configuration Settings
Use NP Inventory on this Product You must set this to "Yes" if you want to track inventory on the product. You must manually set this to "Yes" for every product that you want to track. If this is not set to "Yes", no inventory tracking will take place. By default, no product is tracked.
Override Global Settings If this is set to "Yes" the configurations settings will be taken from the individual product screen instead of from the Global configuration settings found under under system extension configuration. If set to "No", the module will use the global settings from above when doing inventory for the product. The default is to use the global settings.
Amount considered out of stock Overrides same setting under Global Configuration.
Deactivate when product level is out of stock Overrides same setting under Global Configuration.
Allow purchase even after out of stock Overrides same setting under Global Configuration.
Automatically remove from basket Overrides same setting under Global Configuration.
Send Low Inventory Notices Overrides same setting under Global Configuration.
Amount considered low Overrides same setting under Global Configuration.
Low Email To Address Overrides same setting under Global Configuration.
Low Email From Address Overrides same setting under Global Configuration.
Low Email Subject Overrides same setting under Global Configuration.
Low Email Body Overrides same setting under Global Configuration.
Automatically change stock levels Overrides same setting under Global Configuration.
Show out of stock messages Overrides same setting under Global Configuration.
Show in stock messages Overrides same setting under Global Configuration.
Out of Stock Messages*
Product Level Overrides same setting under Global Configuration.
Attribute Level - Checkbox Overrides same setting under Global Configuration.
Attribute Level - Radio Buttons Overrides same setting under Global Configuration.
Attribute Level - Select Box Overrides same setting under Global Configuration.
In Stock Messages*
Product Level Overrides same setting under Global Configuration.
Attribute Level - Checkbox Overrides same setting under Global Configuration.
Attribute Level - Radio Buttons Overrides same setting under Global Configuration.
Attribute Level - Select Box Overrides same setting under Global Configuration.
Other Messages*
Out of Stock - Basket Line Marker Overrides same setting under Global Configuration.
Out of Stock - Basket Overrides same setting under Global Configuration.
Out of Stock - Checkout Overrides same setting under Global Configuration.
Setting Product Inventory Levels
The administrator can set product inventory levels by going to the product page within the Miva Merchant admin area and clicking on NetPush Advanced Inventory. This is the same screen as the product level configuration. Product inventory levels are shown below the configuration area. To add new inventory, use the yellow add button. To edit inventory, click white add button next to the inventory entry.
The module checks inventory by looking at a unique combination of Product Code, Attribute Code, and Option Code. When entering stock levels, you enter the codes separated by a pipe. For example, shirt1|color|red, where shirt1 is the product code, color is the attribute code, and red is the option code. If you do not set an inventory level for an existing product attribute combination, no tracking is done. Setting a stock level of -9999 has the same effect.
Inventory at a product level You may choose to only track inventory at a product level in combination with or not at an attribute level. To enter a stock level for a product, simply use prodcode||. This tells the system that you are tracking the product code, but not the attributes or options by leaving them blank. Using -9999 for a stock level will temporarily turn inventory tracking off.
Inventory at the attribute level (checkbox, select box, radio buttons) Checkbox - prodcode|attrcode|(the last field should be left blank, as checkboxes have no options) Select Box and Radio Buttons - prodcode|attrcode|optcodeAll 3 are required and must be unique, even if you are using attribute templates. If you are using normal templates in combination with attribute templates, make sure you do not give them duplicate code names.
Using Advanced Inventory with Template Modules and OpenTokens
The Advanced Inventory Module can be used with 3rd party template modules like the ones from Viking Coders by using Open UI tokens on product pages to display current inventory levels. Please note that token support has not been completely tested as of yet.
%module|npinventory|stock_level% Returns the stock level for the product, attribute, option combination. To ensure that this works correctly, you should set g.NPI_Product_Code, g.NPI_Attribute_Code, and g.NPI_Option_Code to the current product code, attribute code, and option code. On a checkbox, make sure to set g.NPI_Option_Code = ''. On a product level, make sure to set the attribute and option variables to ''. After these globals are set, call the token. If the return value is -9999, the item is not being tracked.
%module|npinventory|stock_available% Same as above but shows the amount available.
%module|npinventory|oos_level% Same as above but shows the out of stock level.
%module|npinventory|stock_list% This token will set a global variable that contains an array of structures. You must set g.NPI_Product_Code equal to the current product code before calling the token. This array contains all of the product code, attribute code, and option code combinations for a specific product. It also contains the available stock, out of stock level, and other information shown below. This token makes it easy to create a stock table using OpenUI tokens in Viking Coders templates or in a product header or footer. Code examples are available in the help pages on the NetPush.com site. Array Structure: g.NP_Inventory_StockList[i]:attribute_code - Attribute Code g.NP_Inventory_StockList[i]:option_code - Option Code g.NP_Inventory_StockList[i]:stock_level - Stock Level g.NP_Inventory_StockList[i]:oos_level - Out of stock level g.NP_Inventory_StockList[i]:available - Stock Level minus out of stock level g.NP_Inventory_StockList[i]:allow_pur - Allow purchases even if out of stock from admin settings g.NP_Inventory_StockList[i]:low_amount - Low amount from admin settings g.NP_Inventory_StockListLen - Variable that tells you how many items are in the array (represented by i above)
Ease the navigation of your site with this module. Allows you to navigate to the previous and next products in each category from the product display. All configurable from your stores admin.
Utility module to change the next order number. Sometimes you need to increment the order number, and running more orders will simply take too long. You can change the number to any whole number larger than your current, and less than Miva Merchants' Max order number.
You will also be given a prompt to clear out orphan order numbers. These numbers are orders that were taken, but never completed. Sometimes orphans will be re-claimed if they are not cleared out. It will tell you how many there are in the system.
Adds links on product page to send the shopper to the next and previous products in the current category. Only works when following a link to a product from the category listings.
Wanting to reset your order numbers to a new starting point? This module will let you specify the next order number in your store. Also, has an option to delete orphaned order numbers.
A great diagnostic and database tool for developers, administrators and store owners. With Latu Developers' Tools, you can easily view the structure and content of any Miva Merchant database.
Details:
User-friendly Navigation û quickly scroll through records, screen by screen, select any record and display it's full content, or easily link to the first or last record in a database.
Comprehensive Search Functionality û find a keyword in any field of a database.
Customizable Options - choose to display all Miva Merchant databases or only those that are installed; time_t date values can also be displayed in a format that's more easy for we humans to read.
List of Databases
The listing is grouped into five types of databases:
1. Merchant Databases 2. Merchant Features Databases 3. Merchant Modules Databases 4. Store Databases 5. Store Features Databases 6. Store Modules Databases 7. Store Payment Modules Databases
An "Open In New Window" tab is provided for, well, doing just that - opening the Latu Developers' Tools in a new window so that you can more easily use it while accessing other parts of the Miva Merchant admin.
Reveal & View a Database
"reveal" & "view" links are provided to the left of each listed database. The "reveal" link displays the structure of the selected database, and the "view" link lists the selected database's records.
Easily Switch to Any Database
Databases can also be selected through a drop-down menu, which makes it easy to switch between databases.
Navigation tabs are also provided for easily linking back and forth between the "Reveal Database Structure" & "View Database Records" screens.
Viewing Database Records
When viewing a database's records û
Navigate through the database records by clicking on the "first", "prev", "next", or "last" links. Use the "prev" and "next" to navigate from screen to screen (20 records per screen). Go to the end of the database (the most recent record) by clicking on the "last" link. Return to the beginning of the database by clicking on the "first" link.
Select any record and it's full content can be displayed.
Searching Database Records
Search the database by keyword. All fields in the database are searched.
Refreshing Database Records
A convenient"Refresh Database Records" link is also provided for easily refreshing the database records currently listed on the screen. The position in the database and any search string that has been entered will be kept.
With this
module, you can easily modify the StoreKey value for the Orders, Baskets,
Products or any Miva Merchant database. A useful database tool for developers,
administrators and store owners.
Set the
next available Order Number, Basket ID, or Product ID;
Manage coupon addition and redemption functions within a Miva Merchant 2.2x, 3.x or 4.x storefront with this plugin module. License is for ONE mall. Within that single mall, it can be
used in multiple stores without additional license.
Features: (some features are only in the compiled version)
- Configurable prompt
- Configurable action
- Configurable redemption
- Configurable coupon rejection messages
- OpenTokens for use in OpenObjects
- Searchable coupon database with pagination
- Easy view admin for coupon content and historical usage
- Coupon codes can be individually assigned
- Import coupon codes from flat file in bulk
- Autogenerate coupon codes with token
- Assign coupon code as a series for affiliate purposes
- Global scope or for specific products
- Checkout coupons one per order
- Instant coupons on product pages, multiple per order
- Fixed amount or percentage of eligible products discounting
- Specific product eligibility can be scoped to the attribute level
- Minimum order level for redemption
- Establish expiration dates
- Line item display in basket after redemption
- Single use coupons
- One per customer coupons
- Multiuse coupons (can be limited)
- Free shipping coupons
- Limit the country, state or zip a coupon can be used for
- Combination of free shipping and order discount (% or fixed) coupon
- Easy deletion of expired coupons
- Coupon report identifies coupon usage
Feature Details. You can add coupons through the standard Miva Merchant admin interface and include usage criteria.
An unlimited number of coupons can be assigned to the store and each identified with a coupon code. Once you have added the module to the store, you can add coupons in the Order Fulfillment section of the admin interface. When you select the Add icon, you will have several input fields to fill in. You must enter a unique code for your coupon. This is the code that you will give to customers so they can shop and redeem the coupon (one per order). It can be any combination of letters and/or numbers.
The compiled version has a coupon generation function. You can embed a token in your welcome email or notification emails generated with our
Mail Manager module. A unique coupon code will be created and is based on the coupon template you designate. You can have an unlimited number of templates and an unlimited number of coupons copied from them. If you are not using our Mail Manager, you can still activate the generator by placing the token in the invoice header if you are using the OpenUI.
If you have a lot of coupons you want to load into the system quickly, the compiled version has a coupon import from flat file module
An optional expiration date can be included which will prevent its use if the date has passed. Enter it in the year, month, day format, eg. 20000724 would be July 24, 2000. If you leave this field blank the coupon will never expire. However, you can still delete it manually through the admin interface.
A fixed value OR percentage discount off the order total is assigned to each coupon. The default is fixed value/price,
eg $5.00 off the order total. If you put the % sign in the next input field AFTER the value field, it will calculate the coupon value based on the assigned percent of the order total. The %, if used, is entered in the separate field to the right for that purpose. If left blank, the calculation will be based on the fixed value of the coupon. See the note below about restricting discount calculations to specific products instead of the order total. A maximum redemption value can be assigned to each coupon in Merchant 4.x.
If you enter the letter S in the field to the right, the
coupon will be used to allow free shipping (compiled version only) for the entire order. Other criteria for the coupon must be met, e.g. minimum order amount, eligible products, etc.
Optionally, a coupon can be allowed only when an order total reaches a specific amount. For example, you can give a 10% discount when the order total reaches $200 as an incentive or promo. In all cases where a raw value is used, you must make this value equal to or greater than the value of the coupon. If you use the percent calculation, this value can be any value, including zero.
Based on your state's tax requirements, the coupon can be designated to reduce the sales tax or not reduce it. The coupon's tax effect is on the order total, not on individual products. For example, in some states, a store coupon reduces the cumulative value of products purchased before the sales tax is applied, hence you would want it to reduce tax. The exception to doing this is if your products are likely to be non-taxable, making a coupon reduce tax could result in a negative tax calculation. Another type coupon might be the manufacturer coupon. In some states, manufacturer coupons do not decrease the tax liability. You should determine your state's tax requirements before adding coupons to your store.
Coupons can either be used:
multiple times - The coupon can be used at every visit by any customer who shops at your store. This is usually used as a promo to customers, user lists, clubs, etc. They often have a short expiration date to limit their use. A typical usage might be a special holiday sale, eg 10% off everything in the store if used by a specified date. This would eliminate the need for special price groups if the intent is that everybody who has the coupon code can use it.
only one time for each customer - The coupon can only be used for one visit per customer. When the same customer shops at your store a second time, if he/she uses the same coupon code, it will be rejected. This is probably the most common coupon and is usually used in print ads or as a promo, eg. "$5.00 off on your next visit".
only one time for a unique coupon code - The coupon can only be used once. Once any customer has used this code, it becomes unavailable for any other purchase. This is often used as a customer relations tool, eg "sorry for the inconvenience, please accept this coupon.....".
You can restrict usage of a coupon in your store so that it can be used only if a specific product code is ordered. You can list several product codes, any of which in the basket would make the coupon valid if the other requirements are met. Leaving the product code blank means that customers do not have to order a specific product as long as they meet the other requirements the store owner has specified. If you check the box to the left of the product code list AND are using the percentage discount, only those products in the code list will be used in the calculation using the qualifying products subtotal. If you do not check the box, the percentage discount will be applied against the order total. In Merchant 4.0, you can use a wildcard for the product list, e.g. 1AA* would make all products beginning with 1AA eligible for the coupon discount.
New in the compiled version of the coupon module is the ability to restrict the coupon usage down to the attribute level. For example, you can limit the coupon to product codes beginning with 1AA and the attribute "Version" with the option of "4.5". The
format for the input would be 1AA*~Version~4.5|
Alternatively, if you precede the product list with a - (minus) character, the coupon will be excluded from use with those product codes. You canNOT specify it to the attribute level like the include above. (compiled version only)
Appropriate error messages are displayed when coupons don't meet the usage criteria established by the store owner. When the shopper enters a coupon code at checkout that is not valid based on the criteria you establish, he/she will see an error message just below the coupon code input when the checkout form is re-displayed. One coupon can be redeemed per order on the checkout page.
In admin, the coupons can be easily displayed and edited. The coupons are displayed in a table format with configurable number of coupons per page displayed. The entire coupon database is searchable by coupon code or portion of the coupon code.
Expired coupons can be removed from the database (to cut down on disk usage) one at a time or in mass. In admin, you can either put a check in the remove column and select update or select purge expired coupons, then select update.
A historical database, which can be imported and analyzed in database or spreadsheet software, is maintained on all coupons used. The couponuz.dbf can be FTPd to your PC for further analysis in MS Access, MS Excel, or other data management software. This could be useful in determining which coupons bring you the most activity. The number of uses for each coupon is displayed in the admin table in Merchant 4.0
New in the compiled version is the coupon usage report. You can summarize or list each coupon used for a specific time period. You can also restrict the output to a specific coupon code or a string of characters in a coupon code. This latter is useful when you have assigned a series of coupons to an affiliate or advertising campaign. You can determine how much business was brought in with the coupons from various sources.
The compiled version of this module can use OpenTokens instead of hook points within OpenObjects. The OpenDesigner screen lists the OpenObjects which can replace all or some screens within the OpenUI user interface. The OpenObjects provide a template screen which contains the existing hook points (backward compatibility), OpenToken capability, and the ability to move output around within the OpenObject screen. Since the tokens in this module conform to OpenToken functionality, they may be used in other template type screens.
MMUI and OpenUI compatible. If you are using MMUI, there are two required edits in the mmui.mv. If using MMUI in
a compiled version of Merchant (4.14 and newer), you will need to edit and recompile the mmui.mv (expensive proposition). Thus, with compiled Merchant, we recommend using OpenUI instead of the MMUI user interface.
Manage coupon addition and redemption functions within a Miva Merchant 5.x storefront with this plugin module. License is for ONE mall. Within that single mall, it can be used in multiple stores without additional license. This module is for MIVA Merchant 5.x. We also have the corresponding module for an older version of Merchant.
Features:- Configurable prompt - Configurable action - Configurable redemption - Configurable coupon rejection messages - Uses tokens to place input on pages - Searchable coupon database with pagination - Easy view admin for coupon content and historical usage - Coupon codes can be individually assigned - Import coupon codes from flat file in bulk - Autogenerate unique coupon codes with token - Assign coupon code as a series for affiliate purposes - Global scope or for specific products - Checkout coupons one per order - Instant coupons on product pages, multiple per order - Fixed amount or percentage of eligible products discounting - Specific product eligibility can be scoped to the attribute level - Minimum order level for redemption of checkout coupons - Establish expiration dates - Line item display in basket after redemption - Single use coupons - One per customer coupons - Multiuse coupons (can be limited) - Free shipping coupons - Limit the country, state or zip a coupon can be used for - Combination of free shipping and order discount (% or fixed) coupon - Easy deletion of expired coupons - Coupon report identifies coupon usage
Feature Details. You can add coupons through the standard Miva Merchant admin interface and include usage criteria.
An unlimited number of coupons can be assigned to the store and eachidentified with a coupon code. Once you have added the module to the store, you can add coupons in the Order Fulfillment section of the admininterface. When you select the Add icon, you will have several input fields to fill in. You must enter a unique code for your coupon. Thisis the code that you will give to customers so they can shop and redeemthe coupon. It can be any combination of letters and/or numbers.
You canembed a token in your welcome email or notification emails generated with our Mail Manager (Emporium Plus - Weiland) module. A unique coupon code will be created and is based on the coupon template you designate. You can have an unlimited number of templates and an unlimited number of coupons copied from them. If you are not using our Mail Manager, you can still activate the generator by placing the token in the invoice header. If you are using our Tell A Friend (Emporium Plus - Weiland) module, you can embed the unique coupon code in the emails that customers send when referring their friends to your store. The coupon generation is also useful when it is embedded into the follow on contact emails that our Follow On Contact (Emporium Plus - Weiland) module sends out.
If you have a lot of coupons you want to load into the system quickly,there is a coupon import from flat file module
An optional expiration date can be included which will prevent its useif the date has passed. Enter it in the year, month, day format, eg. 20000724 would be July 24, 2000. If you leave this field blank the coupon will never expire. However, you can still delete it manually through the admin interface.
A fixed value OR percentage discount off the order total is assigned to each coupon. The default is fixed value/price, e.g. $5.00 off the order total. If you put the % sign in the next input field AFTER the value field, it will calculate the coupon value based on the assigned percent of the order total. The %, if used, is entered in the separate field to the right for that purpose. If left blank, the calculation will be based on the fixed value of the coupon. See the note below about restricting discount calculations to specific products instead of the order total. A maximum redemptionvalue can be assigned to each coupon.
Free shipping coupon option. If you enter the letter S in the field to the right of the value field, the coupon will be used to allow free shipping for the entire order. Other criteria for the coupon must be met, e.g. minimum order amount, eligible products, etc.
Optionally, a coupon can be allowed only when an order total reaches a specific amount. For example, you can give a 10% discount when the order total reaches $200 as an incentive or promo. In all cases where a raw value is used, you must make this value equal to or greater than the value of the coupon. If you usethe percent calculation, this value can be any value, including zero.
Based on your state's tax requirements, the coupon can be designated toreduce the sales tax or not reduce it. The coupon's tax effect is onthe order total, not on individual products. For example, in some states, a store coupon reduces the cumulative value of products purchased before the sales tax is applied, hence you would want it to reduce tax. The exception to doingthis is if your products are likely to be non-taxable, making a coupon reduce tax could result in a negative tax calculation. Another type coupon might be the manufacturer coupon. In some states, manufacturer coupons do not decrease the tax liability. You should determine your state's tax requirements before adding coupons to your store.
Coupons can either be used:
multiple times - The coupon can be used at every visit by any customer who shops at your store. This is usually used as a promo to customers,user lists, clubs, etc. They often have a short expiration date to limittheir use. A typical usage might be a special holiday sale, eg 10% offeverything in the store if used by a specified date. This would eliminatethe need for special price groups if the intent is that everybody who hasthe coupon code can use it. In the compiled version you can limit the number of times a multiple coupon is redeemed.
only one time for each customer - The coupon can only be used for one visit per customer. When the same customer shops at your store a secondtime, if he/she uses the same coupon code, it will be rejected. This isprobably the most common coupon and is usually used in print ads or as a promo, eg. "$5.00 off on your next visit".
only one time for a unique coupon code - The coupon can only be used once. Once any customer has used this code, it becomes unavailable for any other purchase. This is often used as a customer relations tool, e.g. "sorry for the inconvenience, please accept this coupon.....".
Global or product related. You can restrict usage of a coupon in your store so that it can be used only if a specific product is ordered. You can list several product codes,any of which in the basket would make the coupon valid if the other requirements are met. Leaving the product code blank means that customers do not have to order a specific product as long as they meet the other requirements the store owner has specified. If you check the box to the left of the product code list, and are using the percentage discount, only those products in the code list will be used in the calculation using the qualifying products subtotal. If you do not check the box, the percentage discount will be applied against the order total. Youcan use a wildcard for the product list, e.g. 1AA* would make all productsbeginning with 1AA eligible for the coupon discount.
Use instant coupons on the individual product pages and for specific products. These coupons are redeemed at the product page and instantly appear in the basket as a line item discount related to a specific product. Unlike the global checkout coupons, customers can redeem multiple instant coupons in a single order. From a marketing standpoint this gives the merchant the opportunity to offer a promo code atthe product level which gives an impending event (expiration of the promo)to encourage sales while not lowering the value of the product with an overtprice discount.
You can restrict the coupon usage down to the attribute level. For example, you can limit the coupon to product codes beginning with 1AA and the attribute "Version" with the specific option value of "4.5". The format for the input would be 1AA*~Version~4.5|
If you precede the product list with a - (minus) character,the coupon will be excluded from use with those products.
You can limit the coupon to be used only if the customer is in a specific zone. You can use ONE of six possible zone limitations for each coupon (ship to: country, state or zip; bill to: country, state or zip).
Appropriate error messages are displayed when coupons don't meet theusage criteria established by the store owner. When the shopper entersa coupon code that is not valid based on the criteria you establish, he/she will see an error message just below the coupon codeinput when the page is re-displayed.
In admin, the coupons can be easily displayed and edited. The couponsare displayed in a table format with configurable number of coupons per page displayed. The entire coupon database is searchable by coupon code or beginning portion of the coupon code.
Expired coupons can be removed from the database (to cut down on disk usage) one at a time or in mass. In admin, you can either put a checkin the remove column and select update or select purge expired coupons, then select update.
A historical database, which can be imported and analyzed in database orspreadsheet software, is maintained on all coupons used. The couponuz.dbfcan be FTPd to your PC for further analysis in MS Access, MS Excel, or other data management software. This could be useful in determining which coupons bring you the most activity. The number of uses for each coupon is also displayed in the admin table.
The coupon usage report module can provide historical data within your admin. You can summarize or list each coupon used for a specific time period. You can also restrict the output to a specific coupon code or a string of characters in a coupon code. This latter is useful when you have assigneda series of coupons to an affiliate or advertising campaign. You can determine how much business was brought in with the coupons from various sources.
The module currently fully supports the mivasql configuration of MIVA Merchant 5. It also supports MySQL as long as load balancing has the data stored on the single MySQL server. This would be the case in most of the server setups. For those that are not, we are in the process of converting the code for that remaining, very small group of MIVA Merchant stores. At this time we have not had a problem. Modules will be moved to the top of the queue as needed.
The ultimate Miva Merchant autoresponder module - send specialized emails at the completion of the order. These emails are in addition to or in place of the standard emails which are sent at order completion, e.g. merchant notification, customer confirmation and even vendor specific notification.
Features: (some features are only in the compiled version)
- Autoresponder - specialized emails at the completion of the order
- Merchant notification and customer confirmation
- Vendor and product specific templates
- Include coupons or promo codes when specific products ordered
- Easy to use checkbox configuration of vertical or horizontal layout emails
- Highly configurable free form template layout emails with embedded tokens
- HTML or text email formatting
- Archive flat file is created for each template, easily track sales activity
- Mail Manager Report module can display the flat file contents by time period or product
- Ship to, bill to and other email addresses for each template
- Send emails to your company's internal departments, e.g. shipping
- Emails to web enabled cell phones
- Open architecture so that other events can also trigger an automated response
- Send a welcome email before the order completes and include a promo code
- Include 3rd party data with tokens, e.g. Addendum responses
- Display shipping and payment invoice messages
- Create packing slip and label emails
- Ship to country address formatted according to the applicable country's postal recommendations
- Restrict email to a specified order dollar value range, reward big spending customers with a coupon
- Restrict email to a specified list of countries, thus allowing for language specific emails
- MMUI and OpenUI compatible. No editing of the mmui.mv is needed and no OpenUI hook points are used
In admin, you create one or more template emails. Each
template can be different, i.e. what it displays, how the
data is oriented on the screen/paper, and what product(s)
triggers the autoresponder. Most responses are triggered
by the product codes purchased. Some example uses:
Email to any of your
drop-ship manufacturers listing the Ship To
address and the products to be shipped if using real time credit
card authorization. The module will sort out which drop shipper gets which emails, including listing the products to be shipped. You can still use the module if you are not using real time authorization, but you would send the email to your pending mailbox until manual processing verified the charge, then forward to the drop shipper. This would save hand entering the order. In addition to the email, an archive flat file is created which you can use to easily track sales activity related to each of your drop-ship manufacturers.
Email to Ship To or Bill To or both thanking them for
a
donation to your sponsored charity on your site.
Email to
your shipping department listing Ship To address
and products ordered if using real time credit card
authorization. Products section can be torn/folded to
result in a shipping label with your company address included. If not using real time authorization, use the pending mailbox technique similar to the drop shipper scenario above.
Email a
promo coupon code if a customer purchases a specific
product or from a list of products
Email service, warranty, shipping and contact information on
specific products or
product lines
Send an email to your cell phone's text messaging
when orders are placed in your store (requires a cell phone
plan that assigns an email address to your phone)
You own a mall with multiple stores within the mall. Those
store owners rent the stores from you for a percentage of
their gross. Use mail manager as an audit tool to track their
sales. In addition to the autoresponse email, mail manager
produces a flat file with order ID, date, product name,
product code, quantity, price for each, and price extended.
Periodically retrieve that flat file and import into a spreadsheet
for easy analysis.
With compiled Merchant, the included Mail Manager Report
module can display the contents of that flat file
through admin. It can filter the report by specific time
periods (daily, weekly, monthly) within reason. The limits
of your PC or server may prevent very lengthy reports for
excessively long time periods. It can also limit the
report to only one product code. Since the templates can
be designed for each vendor, you can create individual
vendor flat files with a corresponding report for each
vendor.
Literally, you can have a different autoresponder for every
product in your store.
However, Mail Manager has a somewhat open architecture so that other events can also trigger an automated response. For example:
Send a
welcome email before the order completes, but after
the customer completes the registration process (for those that
create an account)
Send a thank you for
rating a product (using our Rate This system)
along with a coupon code for taking the time to do so
Essentially any event in the mmui, oui or even another third party module can trigger an email which you write for the
particular event
You can use the
ifvar script or var token in these "other event" emails. For example, generate a unique
coupon code with a module token and insert it in the welcome email to give the new customer an incentive to buy now. If you don't have an account with us yet, sign up and you'll see how it works.
As you can see, the uses of this Mail Manager are quite
diverse. Some of the variable features configured through
admin for each template are:
In the compiled version is a free form template using an
extensive list of
tokens and mini-scripts to customize the emails that
are sent at the time of order completion. They can vary
from mimics of the standard
merchant notification and customer confirmation emails to brief order notifications for better acceptance within cell
phone emails. The emails can be plain text or HTML formatted emails for better readability. You can change the fonts, colors, layout and even add images to your confirmation and notification emails. You can include data from other 3rd party modules, like Addendum, by using tokens. You can also create label emails with the "ship to" country address formatted according to the applicable country's postal recommendations when using the HTML template.
Customize your email and store's physical address
Designate email recipient, i.e. Ship To and/or Bill To and/or fixed email address
List full or partial Ship To and/or Bill To address
Restrict email to a specified order dollar value range, reward big spending customers with a coupon for their next visit
Restrict email to a specified list of countries, thus allowing for language specific emails
Write a different body for each of the email templates you add
Link to one or more product codes or entire inventory with wildcard
No need to go to each product to link the email, a copy and paste from a flat text file will add hundreds instantly
I'd be surprised if you find that this capability
exists anywhere in any mid-priced shopping cart system.
Autoresponders that fill in the blanks are one thing, but
this is a store owner, pre-planned autoresponse for a
specific product. Within your store, you could have dozens
of different responses (individual or grouped) or a
wildcard response for all of the products. You can use it
to make connections not directly related to sales, yet
linked to a specific sale.
Customer buys a kayak from your store. Tell them about
the kayak camp 20 miles from your store and give them the 800 number of the guy with the info about a big get together next month.
Customer buys an orchid from you which would lead you to believe he/she may have a specific variety you have been looking for. You autorespond with your want list for your nursery in hopes of finding the needle in a haystack.
As you can see, this list could be endless. Targetted,
intelligent autoresponders are designed to increase your store's
business and decrease the amount of time employees spend on sending out product specific, followup emails.
MMUI and OpenUI compatible. No editing of the mmui.mv is needed and no OpenUI hook points are used. Thus, module conflict does not occur. The pre-formed templates are easy to configure and do not require programming experience. In the compiled version of Merchant (4.14 and newer), you
also have the option of using tokens and mini-scripts in free form templates. An example free form template is included with the install documents.
The ultimate Miva Merchant autoresponder module - send specialized emails at the completion of the order. These emails are in addition to or in place of the standard emails which are sent at order completion, e.g. merchant notification, customer confirmation, vendor specific notification, and even cell phone emails. It also can send welcome emails when a new customer account is created. This module is for MIVA Merchant 5.x. We also have the corresponding module for an older version of Merchant.
Features: - Autoresponder - specialized emails at the completion of the order - Merchant notification and customer confirmation - Vendor and product specific templates - Can limit sending based on a specific attribute/option code for a product - Include coupons or promo codes when specific products ordered - Optionally require an input to allow the email, e.g. a response from Addendum - Easy to use checkbox configuration of vertical or horizontal layout emails - Highly configurable free form template layout emails with embedded tokens - HTML or text email formatting - Archive flat file is created for each template, easily track sales activity - Mail Manager Report module can display the flat file contents by time period or product - Ship to, bill to and other email addresses for each template - Send emails to your company's internal departments, e.g. shipping - Emails to web enabled cell phones as abbreviated messages - Open architecture so that other events can also trigger an automated response - Can resend emails when the customer knows and enters their order number and email address - Use render token to send an email from any pagein the store - Send a welcome email before the order completes and optionally include a promo code, customer login and password - Include 3rd party data with module tokens, e.g. Addendum responses - Display shipping and payment invoice messages - Create packing slip and label emails - Ship to country address formatted according to the applicable country's postal recommendations - Restrict email to a specified order dollar value range, reward big spending customers with a coupon - Restrict email to a specified list of countries, thus allowing for language specific emails
Feature Details. In admin, you create one or more template emails. Eachtemplate can be different, i.e. what it displays, how the data is oriented on the screen/paper, and what product(s) triggers the autoresponder. Most responses are triggered by the product codes purchased. Some example uses:
Email to any of your drop-ship manufacturers listing the Ship To address and the products to be shipped if using real time creditcard authorization. The module will sort out which drop shippergets which emails, including listing the products to be shipped. Unlike some other vendors' drop ship notification modules, this one only includesthe products belonging to the associated drop shipper. Thus a drop shipper doesnot see the products being supplied to the customer by other drop shippers when the order contains multiple product sources. Youcan still use the module if you are not using real time authorization, but you would send the email to your pending mailbox until manual processingverified the charge, then forward to the drop shipper. This would savehand entering the order. In addition to the email, an archive flatfile is created which you can use to easily track sales activity related to each of your drop-ship manufacturers.
Email to Ship To or Bill To or both thanking them for a donation to your sponsored charity on your site.
Email to your shipping department listing Ship To addressand products ordered if using real time credit card authorization. Products section can be cut/folded to result in a shipping label with your company address included. If notusing real time authorization, use the pending mailbox technique similarto the drop shipper scenario above.
Email a promo coupon code if a customer purchases a specificproduct or from a list of products
Email service, warranty, shipping and contact information on specific products or product lines
Send an email to your cell phone's inbox when orders are placed in your store (requires a cell phone plan that assigns an email address to your phone).
You own a mall with multiple stores within the mall. Thosestore owners rent the stores from you for a percentage of their gross. Use mail manager as an audit tool to track theirsales. In addition to the autoresponse email, mail manager produces a flat file with order ID, date, product name, product code, quantity, price for each, and price extended. Periodically retrieve that flat file and import into a spreadsheetfor easy analysis.
The included Mail Manager Report module can display the contents of that flat file through admin. It can filter the report by specific timeperiods (daily, weekly, monthly) within reason. The limits of your PC or server may prevent very lengthy reports for excessively long time periods. It can also limit the report to only one product code. Since the templates canbe designed for each vendor, you can create individual vendor flat files with a corresponding report for each vendor.
Literally, you can have a different autoresponder for everyproduct in your store.
However, Mail Manager has a somewhat open architecture sothat other events can also trigger an automated response. For example:
Send a welcome email before the order completes, but afterthe customer completes the registration process (for those thatcreate an account)
Send a thank you for rating a product (using our Rate This system)along with a coupon code for taking the time to do so
You can use the ifvar script or var token in these "other event" emails. For example, generate a unique coupon code with a module token and insert it in the welcome email to give the new customer an incentive to buy now.
Use a render token to send an email from any page in the store. For example, put it on the product page to send a specific email when a specific product's page is viewed by a customer who is logged in. The email goes to their password recovery address (but could be bill to or ship to address). If you want it sent to a hard coded address, e.g. yours to monitor traffic,you would put your email address in the 3rd parameter of the token. The uses of this feature are endless. Send a coupon to entice customers to buy when they visit specific product screens. Tell them about other products related to the one they just viewed.
As you can see, the uses of this Mail Manager are quite diverse. Some of the variable features configured through admin for each template are:
Show or hide any of the data elements
Orient your email either horizontally or vertically
There is also a free form template using an extensive list of tokens and mini-scripts to customize the emails that are sent at the time of order completion. They can vary from mimics of the standard merchant notification and customer confirmation emails to brief order notifications for better acceptance within cell phone emails. The emails can be plain text or HTML formattedemails for better readability. You can change the fonts, colors,layout and even add images to your confirmation and notificationemails. If your shipping and payment modules are configured withinvoice notices, these can be included in the emails with a token. You can include data from other 3rd party modules, like Addendum, by using tokens. You can also create packing slip and label emails with the "ship to" country address formatted according to the applicable country's postal recommendations when using the HTML template. In the free form template you canalso set the time so that it can be offset from the server time,thus display for a different time zone in each of your emails.
Customize your email and store's physical address
Designate email recipient, i.e. Ship To and/or Bill To and/or fixed email address
List full or partial Ship To and/or Bill To address
Restrict email to a specified order dollar value range, reward big spending customers with a coupon for their next visit
Restrict email to a specified list of countries, thus allowing for language specific emails
Resend order emails if the customer knows and enters the order number and email which match the actual order. The form for these two data elements can be placed anywhere you can edit the store user interface, e.g. headers, footers, welcome screen.
You can specify the product code and an attribute/option value that must also be met before the email will be sent. This is particularly useful when the emails are used for vendor notification. A certain product might bedrop shipped by two different vendors and the only difference is the selected attribute/option value.
Insert a "require" token that has to be met before the email will be allowed. As example,have a checkbox using Addendum to ask a customer if they want to be added to a list server (mailing list). Then if they check the box, the "yes" response is sent to Mail Manager. The Mail Manager can then generate a specifically formatted email to activate an email address at your list server, if you have one.
Write a different body for each of the email templates you add
List products and prices or just the products without prices
Link the email usage to one or more product codes or entire inventory with wildcard
No need to go to each product to link the email, a copy and paste froma flat text file will add hundreds instantly
I'd be surprised if you find that this capability exists anywhere in any mid-priced shopping cart system. Autoresponders that fill in the blanks are one thing, but this is a store owner, pre-planned autoresponse for a specific product. Within your store, you could have dozens of different responses (individual or grouped) or a wildcard response for all of the products. You can use itto make connections not directly related to sales, yetlinked to a specific sale.
Customer buys a kayak from your store. Tell them about the kayak camp 20 miles from your store and give them the 800number of the guy with the info about a big get together next month.
Customer buys an orchid from you which would lead you to believe he/she may have a specific variety you have been looking for. You autorespond with your want list for your nursery inhopes of finding the needle in a haystack.
As you can see, this list could be endless. Targetted, intelligent autoresponders are designed to increase your store'sbusiness and decrease the amount of time employees spend on sendingout product specific, emails.
The pre-formed templates are easy to configure and do not require programming experience. For the more experienced, you also have the option of using tokens and mini-scripts in free form templates. An example free form template is included with the install documents.
The Point Track MemberShip module is a tool that can be used to help retain customers by offering incentives to keep them shopping at your store by giving loyal customers discounts, awards, and access to availability and price groups. It requires compiled Merchant 4/OpenUI and is Token Enabled.
Point Track Highlights:
Give Points: givepoints for every dollar purchase
Redeem Points:your customer can use points they've accumulated toward purchases
Point Plateaus:Create memberships by amount accumulated # of points. When your customer reachesa certain #, they can automatically be assigned to the next level
Groups: You canassign each level to a specific price group and/or availability group
This module has many other feature too:
Assign a specific productto activate a membership and/or assign to availability/price group
Manually assign customersto a group level.
Use tokens to displayinformation about the customers membership, etc.
A simple example: gives every one that creates an account and makes a purchase, a point-based discount on future purchases.
Create a membership called"Base."
Assign the threshholdto $0.01.
Assign the number ofpoints earned per dollar spent to "1."
Next, assign the # ofpoints per dollar to "10."
Your customer will receivea $1.00 discount for every 10 points earned
Requirements: compiled Merchant 4/OpenUI and is Token Enabled.
Add user-friendly navigation to the product display page to easily skip to the next/previous/first/last product within the category. Choose to display the product navigation buttons at the top and/or bottom of the product display page. Navigation buttons can be customized with your own text or image. The horizontal alignment of the buttons can also be configured to your preference.
Give your customers the ability to move within the category using page numbers. This allows customers to go back to previous pages they visited rather than having to click the Previous or Next buttons over and over. Also has the feature to have a total product count shown for the selected category. All display options are configurable with an admin interface giving you full control of the look and feel using tokens and your own desired HTML.
Keep connected when you are out of the office!!! - Use your Cell Phone to receive order notifications...
Need to know when a Next Day Air order comes in? Or if some specific products was just ordered?
This module keeps you notified and in the order loop - no more rushing back to check if an order came in. Great for follow-up's where you have to make sure someone else is on the ball. Works in addition to other email order notifications -
Send Features include:
Any Order
Orders over a specified amount
International orders
Specific Shipping Methods
Specific Products
Combination of Shipping Methods and Products
Works with:
AT&T
Verizon Wireless
Cingular
T-Mobile
Nextel
and others
See the slideshow for details.
Easy to switch On and Off, keeps your configuration settings when deactivated.
Please Note: You should have signed up for text messaging with your cell phone provider..
This official book on MIVA Merchant 5 provides step-by-step instructions an examples, providing complete walk-throughs of everything the back end has to offer. Learn how to:
Add Categories, Products, via the admin and via flat file
Configure Upsales based on related items and order subtotals
Manipulate the store's look and feel using STORE MORPH TECHNOLOGYTM and the Power of Templates
Configure Shipping and Payment Options
Perform necessary maintenance
Log and view stats on your customers' movements throughout the store
Expand savings and exclusive products to customers using Price and Availability Groups
Work and build offline using MIVA Mia
The all new, revamped book follows MIVA Merchant to the next level - version 5!
Additional Features: ALL original owners of this book will get one free year of membership for documentation updates, along with monthly updates on tips and tricks for Miva Merchant 5. These valuable PDF docs will give further insight into running your Online store with Miva Merchant, with primary focus on version 5.
Find a string of text in the product descriptions and replace it with a different string of text. This admin module quickly steps through each record in your store's database and makes the find and replacement. The user can choose either case sensitive or case insensitive.
A list of product records containing the find text will be displayed with a checkbox next to each along with a checkbox for ALL. The user can select one, several or all records for the find and replace.
Price: $10 Upgrade Cost: $5
Upgrade Terms (If Any):Upgrade Now Compatibility: MMUI/OpenUI Versions:
3.x, 4.x, 4.14-4.23x Other Module Compatibility: N/A
Another MvCool Exclusive! Download and install LaunchPad and within minutes you'll be wondering how you ever lived without it! Why deal with that awkward Admin Menu Tree, when you can instantly jump to orders, products, categories and MORE!
It's FREE This isn't the first Miva Merchant related product being given away for free, but it's the first of its kind. How can we give away something as valuable as LaunchPad for free?
It's WIN-WIN No long term commitment to buy something, no "paid" version to unlock features. You download and install LaunchPad agreeing to use it unmodified and that's it. There is no obligation to come back to MvCool ever again.
But you MIGHT come back! MvCool has multiple new products listings weekly, special offers, and valuable announcements. We see a traffic spike after every email Newsletter which indicates that one of our biggest issues is keeping customers up-to-date with what's available!
LaunchPad is a Low Impact Update Portal We believe that it is cost effective for us to give away LaunchPad in return for a small piece of your attention when you are using your Admin. We create a low impact portal to tell you about new products and specials at MvCool. These are displayed in the area to the right of the LaunchPad Panel.
What is "Low Impact"? Will this be annoying? If we're smart enough to come up with this idea, build the software, distribute it and motivate people to install it in their stores, we're not going to be so dumb with our content that we drive people away!
What WILL be displayed? New Products, and Promotions are an obvious choice for us. We'll be trying different low impact approaches and see what works best. We'll also have "LaunchPad User ONLY" specials!
What's Next? Just download the LaunchPad zip file, read the instructions, install, logout of admin and then Login again. Several Hot Buttons are already configured to link to frequently used screens, but all 12 are available for you to configure as you please!
The compiled version has a coupon generation function. You can embed a token in your welcome email or notification emails generated with our
Mail Manager module. A unique coupon code will be created and is based on the coupon template you designate. You can have an unlimited number of templates and an unlimited number of coupons copied from them. If you are not using our Mail Manager, you can still activate the generator by placing the token in the invoice header if you are using the OpenUI.
