Charge fees within an order for such things as special packaging, artistic setup, or any miscellaneous charge that needs to be applied and is not an actual product. Multiple fees allowed per store and per product; assigned through admin. The owner can designate multiple fees for use within a store to be: 1) applied to all orders, 2) applied once to an order as long a specified product is ordered, or 3) applied for each time a fee associated product is listed in the basket. Once the store is setup with the possible fees, it is a simple matter of assigning the type of fees applicable to a particular product from the Product Edit Screen in admin. A single product can even have multiple fees. Or in some cases, you might want to use a fee which is only assigned once as long as specific products are ordered. There is also a fee type which is assigned once no matter what products are ordered. That would be your typical handling fee. The fees can be marked as taxable or non-taxable.  for 4.0. Fees can be charged depending on the ship to location (state, zip, or country)
- The ship to location options should be left blank unless they are specifically needed
- You can include specific locations by starting the line with a +
- You can exclude specific locations by starting the line with a -
- Use the location code for states and countries, e.g. FL and US respectively
- You can enter a string of codes up to 254 characters, each code separated with a | and the line ending with a |
- Example: +US|CA|MX| will apply the fee for United States, Canada, and Mexico only
- Example: -FL|GA|MS|AL| will NOT apply the fee for Florida, Georgia, Mississippi, and Alabama but will apply it for all other locations unless excluded or included in the other location options
- You can combine location options, e.g. just US but not the states FL and GA
In the compiled version (Merchant 4.14+), you can specify a range for each fee type. The fee will only be applied if the order subtotal reaches an amount that falls within the range. You can also apply the fee if only a specific attribute is selected. For example, if someone selects to personalize a product, you could charge an artwork fee for the setup or logo creation.
This module works with the MMUI and OpenUI and requires no editing of mv files. 2.x, 3.x Versions Available Price: $30 Upgrade Cost: $10
Upgrade Terms (If Any): N/A
Compatibility: MMUI/OpenUI Versions:
4.x, 4.14-4.16x (Available Compiled)
Other Module Compatibility: N/A From: Order Fulfillment Modules
Relevance: 99.99%%  Rating: (0.00) Votes: (0) Hits: (947) Reviews:
Rate It - Review It - Modify It - Report It Bookmark Miscellaneous Fee Assignment
<-- Just click this link and then add to your favorites! Back to Top
Charge fees within an order for such things as special packaging, artistic setup, order surcharge, or any miscellaneous charge that needs to be applied and is not an actual product. Multiple fees allowed per store and per product; assigned through Miva Merchant admin. Fees are normally a positive value but can be negative if you want to give discounts. This module is for MIVA Merchant 5.x. We also have the corresponding module for an older version of Merchant.The owner can use this module to designate multiple fees for use within a store to be: 1) applied to all orders, 2) applied once to an order as long a specified product is ordered, or 3) applied for each time a fee associated product is listed in the basket. Once the store is setup with the possible fees, it is a simple matter of assigning the type of fees applicable to a particular product from the Product Edit Screen in admin. A single product can even have multiple fees. Or in some cases, you might want to use a fee which is only assigned once as long as specific products are ordered. There is also a fee type which is assigned once no matter what products are ordered. That would be your typical handling fee. You could also use this type for an order surcharge, i.e. $x.xx if the order does not exceed a certain amount. The fees can be marked as taxable or non-taxable. Fees can be charged depending on the ship to location (state, zip, or country)
- The ship to location options should be left blank unless they are specifically needed
- You can include specific locations by starting the line with a +
- You can exclude specific locations by starting the line with a -
- Use the location code for states and countries, e.g. FL and US respectively
- You can enter a string of codes up to 254 characters, each code separated with a | and the line ending with a |
- Example: +US|CA|MX| will apply the fee for United States, Canada, and Mexico only
- Example: -FL|GA|MS|AL| will NOT apply the fee for Florida, Georgia, Mississippi, and Alabama but will apply it for all other locations unless excluded or included in the other location options
- You can combine location options, e.g. just US but not the states FL and GA
You can specify a range for each fee type. The fee will only be applied if the order subtotal reaches an amount that falls within the range. You can also apply the fee if only a specific attribute is selected. For example, if someone selects to personalize a product, youcould charge an artwork fee for the setup or logo creation. The module currently fully supports the mivasql configuration of MIVA Merchant 5. It also supports MySQL as long as load balancing has the data stored on the single MySQL server. This would be the case in most of the server setups. For those that are not, we are in the process of converting the code for that remaining, very small group of MIVA Merchant stores. At this time we have not had a problem. Modules will be moved to the top of the queue as needed. Price: $30.00 Upgrade Cost: $0
Upgrade Terms (If Any): N/A
Compatibility: N/A Versions:
5.x+
Other Module Compatibility: N/A From: Order Fulfillment Modules
Relevance: 99.99%% Rating: (0) Votes: (0) Hits: (499) Reviews:
Rate It - Review It - Modify It - Report It Bookmark Miscellaneous Fee v5
<-- Just click this link and then add to your favorites! Back to Top
Display the contents of baskets before and after the order is finalized. Once a customer enters their personal data, an order number is assigned to the basket. During the next few minutes a variety of things can happen, one of which is the order will be completed without error. On the other hand, an order may be not completed due to server error, communication between the payment processor and your store fails, the customer decides not to purchase, duplicate ID corruption occurs in your orders database, and any number of other perils. If you have not packed your store databases, you may still be able to recover most information from lost orders. This module provides the ship to and bill to customer info. It lists the products and their attributes that were ordered. It lists the shipping, tax, coupons, discounts and other miscellaneous entries. It also displays the payment module and data element (not the CC number). The data will remain in this file until you pack the store databases or the basket number is reclaimed by merchant. The number may be reclaimed if the customer re-visits your store after their earlier, abandoned basket had timed out. If they don't re-visit, the number will remain until you pack the store databases. This module is also included in the Basket Master bundle. Save when you buy bundled module licenses. Version 3.x Available Price: $15 Upgrade Cost: $10
Upgrade Terms (If Any): N/A
Compatibility: MMUI/OpenUI Versions:
4.x, 4.14-4.23x (Available Compiled All 4.x Versions)
Other Module Compatibility: N/A From: Administrative Modules
Relevance: 21.57%%  Rating: (7.00) Votes: (0) Hits: (1056) Reviews:
Rate It - Review It - Modify It - Report It Bookmark Lost and Found Orders
<-- Just click this link and then add to your favorites! Back to Top
Display the contents of baskets before and in most cases, after the order is finalized with this MIVA Merchant module. If you are using Merchant 5.x and MySQL, you will not be able to display the contents of completed orders or baskets which have been deleted in this module. With 5.x and MySQL you will be able to see the baskets which did not complete and have not yet been deleted (either by the store admin when deleting baskets or by the customer deleting their own basket). This module is for MIVA Merchant 5.x. We also have the corresponding module for an older version of Merchant.
Once a customer enters their personal data, an order number is assigned to the basket. During the next few minutes a variety of things can happen, one of which isthe order will be completed without error. On the other hand, an order may not be completed due to server error, communication between the payment processor and your store fails, the customer decides not to purchase, duplicate ID corruption occurs in your orders database, and any number of other perils.
If you have not packed your store databases, you may stillbe able to recover most information from lost orders. This module provides the ship to and bill to customer info. It lists the products and their attributes that were ordered. Itlists the shipping, tax, coupons, discounts and other miscellaneous entries. It also displays the payment moduleand data element (not the CC number) in completed orders (MivaSQL).
With Merchant 5.x (using MivaSQL), the data will remain in this file until you pack thestore databases or the basket number is reclaimed by merchant. The numbermay be reclaimed if the customer re-visits your store aftertheir earlier, abandoned basket had timed out. If they don't re-visit, the number will remain until you pack the store databases. If using 5.x and MySQL, you will still be able to see the data as long as the basket is not deleted and the order had not been completed.Price: $15.00 Upgrade Cost: $0
Upgrade Terms (If Any): N/A
Compatibility: N/A Versions:
5.x+
Other Module Compatibility: N/A From: Administrative Modules
Relevance: 21.57%% Rating: (0) Votes: (0) Hits: (421) Reviews:
Rate It - Review It - Modify It - Report It Bookmark Lost and Found Orders v5
<-- Just click this link and then add to your favorites! Back to Top
Volume pricing at the category level. Easily offer a discount based on the number of items in the basket and the categories those items are in. Features: (some features are only in the compiled version - see details)
- Discount based on number of items ordered
- Set up to 4 tiers of discounts per category group
- Can have 8 groups (each containing one or more categories), each with 4 different discount tiers
- Category wide, multi-category or store wide discounts
- Optionally apply discount after other discounts have lowered the subtotal
- Discount shows at checkout as separate line item
- Optionally display updated discount in basket prior to checkout if using compiled OpenUI
- Can use wildcard instead of entering category codes for the group
- Can exclude a single price group, e.g. Wholesale, from receiving the discount
- MMUI and OpenUI compatible Feature Details:
The default is to calculate product charges in the specified category(ies) (including attribute charges) to determine the subtotal to discount. You can optionally include non-product charges in the calculation. In admin, the store owner configures the trigger levels (number of items needed to activate the discount) and the corresponding percentage off. The store owner can
designate 1 - 4 trigger levels so that he/she can vary the percentage discount based on the number bought. Reward the customer; the more the customer buys, the higher the discount percentage. The store owner then includes a list of category codes that will be used in the calculation. Use this module for category-wide or store-wide discounts. The discount amount will appear during checkout on the screen after the customer has entered their shipping method. This allows Merchant to include (optionally) any miscellaneous fees or coupons redeemed on the Shipping - Payment selection screen so the subtotal will be adjusted before the discount. Additional features are in the compiled version of the module for
Merchant 4.14 and newer. In admin you can setup eight separate groups with their own four-tiered discount and categories. Hence, if you want to discount one category of products with one set of rules (levels) and another category with a different set of rules, you can now do this. Multiple categories can be assigned to each group. As the basket is scanned, the quantities are subtotaled for each group. The discount is applied based on each group's rules, then summed together at checkout. If you are using the OpenUI, you can optionally display the
updated discounts prior to checkout in the regular basket screen. In admin, you can choose
one price group, e.g. Wholesale, which is not eligible for the discount since they
presumably already benefit from significantly lower prices. You can use the asterisk (*) to replace the category codes. When the module encounters the asterisk instead of category codes, it considers all further products eligible. As example, the asterisk in the first group would make all products in the store eligible for the discount. On the other hand, category codes in the first group would apply the first group rules to those categories. Then if there is an asterisk in the second group, all other products in the store would use those discount rules. MMUI and OpenUI compatible. No editing of mv files required for either user interface for standard functioning. Configuration is setup through Merchant Admin. 3.x Version Available Price: $25 Upgrade Cost: $10
Upgrade Terms (If Any): N/A
Compatibility: MMUI/OpenUI Versions:
3.x, 4.x, 4.14-4.16x (Available Compiled)
Other Module Compatibility: N/A From: Discount Modules / Category Specific Discount Modules
Relevance: 21.57%% Rating: (0.00) Votes: (0) Hits: (856) Reviews:
Rate It - Review It - Modify It - Report It Bookmark Percent Off Based on Quantity by Category
<-- Just click this link and then add to your favorites! Back to Top
Easily offer a discount based on the basket subtotal with this Miva Merchant module. The default is to calculate product charges in the specified category(ies) (including attribute charges) to determine the total. You can optionally include non-product charges in the calculation. Then in admin, the store owner configures the trigger levels (amount needed to activate the discount) and the corresponding percentage off. The store owner can designate 1 - 4 trigger levels so that he/she can vary the percentage discount based on the amount spent. The store owner then includes a list of category codes that will be used in the calculation. Compiled Version In the compiled version (Merchant 4.14 and newer), the store owner can even set an expiration date for the sale. When the date is reached, the discounts will automatically stop. The discount amount will appear during checkout on the screen after the customer has entered their shipping method. This allows Merchant to include (optionally) any miscellaneous fees or coupons redeemed on the Shipping - Payment selection screen. Use this module for category-wide discounts. Setup a sale category or use it with existing categories. Use this module for category-wide discounts. MMUI and OpenUI compatible. No editing of mv files required for either user interface. Configuration is setup through Merchant Admin. Version 3.x, 4.x Available Price: $20 Upgrade Cost: $5
Upgrade Terms (If Any): For v4.x Only Compatibility: MMUI/OpenUI Versions:
4.14-4.16x (Available Compiled)
Other Module Compatibility: N/A From: Discount Modules / Category Specific Discount Modules
Relevance: 21.57%% Rating: (0.00) Votes: (0) Hits: (861) Reviews:
Rate It - Review It - Modify It - Report It Bookmark Percent Off Subtotal by Category
<-- Just click this link and then add to your favorites! Back to Top
Volume pricing at the category level. Easily offer a discount based on the number of items inthe basket and the categories those items are in. This module is for MIVA Merchant 5.x. We also have the corresponding module for an older version of Merchant.
Features:
- Discount based on number of items ordered
- Set up to 4 tiers of discounts per category group
- Can have 8 groups (each containing one or more categories), each with 4 different discount tiers
- Category wide, multi-category or store wide discounts
- Optionally apply discount after other discounts have lowered the subtotal
- Discount shows at checkout as separate line item
- Optionally display updated discount in basket prior to checkout using render token
- Can use wildcard instead of entering category codes for the group
- Can exclude a single price group, e.g. Wholesale, from receiving the discount
Feature Details:
Thedefault is to calculate product charges in the specifiedcategory(ies) (including attribute charges) to determinethe subtotal to discount. You canoptionally include non-product charges in the calculation.
In admin, the store owner configures the triggerlevels (number of items needed to activate the discount) and thecorresponding percentage off. The store owner candesignate 1 - 4 trigger levels so that he/she can vary thepercentage discount based on the number bought. Reward thecustomer; the more the customer buys, the higher thediscount percentage.
The storeowner then includes a list of category codes that willbe used in the calculation. Use this module forcategory-wide or store-wide discounts.
The discount amount willappear during checkout on the screen after the customer hasentered their shipping method. This allows Merchant toinclude (optionally) any miscellaneous fees or coupons redeemedon the Shipping - Payment selection screen so the subtotal willbe adjusted before the discount.
In admin you can setup eight separate groups withtheir own four-tiered discount and categories. Hence, if you want to discountone category of products with one set of rules (levels) and another categorywith a different set of rules, you can do this. Multiple categories can beassigned to each group. As the basket is scanned, the quantities are subtotaledfor each group. The discount is applied based on each group's rules, then summedtogether at checkout. You can optionally display the updated discounts prior to checkout in the regular basket screen, recalculatingand updating discounts based on changing basket contents.
In admin, you can chooseone price group, e.g. Wholesale, which is not eligible for the discount since theypresumably already benefit from significantly lower prices.
You can use the asterisk(*) to replace the category codes. When the module encounters the asterisk instead ofcategory codes, it considers all further products eligible. As example, the asterisk inthe first group would make all products in the store eligible for the discount. On the other hand,category codes in the first group would apply the first group rules to those categories.Then if there is an asterisk in the second group, all other products in the store woulduse those discount rules.The module currently fully supports the mivasql configuration of MIVA Merchant 5. It also supports MySQL as long as load balancing has the data stored on the single MySQL server. This would be the case in most of the server setups. For those that are not, we are in the process of converting the code for that remaining, very small group of MIVA Merchant stores. At this time we have not had a problem. Modules will be moved to the top of the queue as needed. Price: $27.50 Upgrade Cost: $0
Upgrade Terms (If Any): N/A
Compatibility: N/A Versions:
5.x+
Other Module Compatibility: N/A From: Discount Modules / Category Specific Discount Modules
Relevance: 21.57%% Rating: (0) Votes: (0) Hits: (383) Reviews:
Rate It - Review It - Modify It - Report It Bookmark Percent Off Based on Quantity by Category v5
<-- Just click this link and then add to your favorites! Back to Top
Easily offer a discount based on the basket subtotal withthis MIVA Merchant module. Thedefault is to calculate product charges in the specified category(ies) (including attribute charges) to determine the total. You can optionally include non-product charges in the calculation. Then in admin, the store owner configures the trigger levels (amount needed to activate the discount) and thecorresponding percentage off. The store owner can designate 1 - 4 trigger levels so that he/she can vary thepercentage discount based on the amount spent. The storeowner then includes a list of category codes that willbe used in the calculation. The store owner can even setan expiration date for the sale. When the date is reached,the discounts will automatically stop. You can even reverse the amount and make it a surcharge for a specific list of categories. This is useful if you have a materials surcharge that effects a specific group of products and they are in a specific category.
The discount amount willappear during checkout on the screen after the customer has entered their shipping method. This allows Merchant to include (optionally) any miscellaneous fees or coupons redeemedon the Shipping - Payment selection screen.
Use this module for category-wide discounts. Setup a sale category or use it with existing categories.
This module is for MIVA Merchant 5.x. We also have the corresponding module for an older version of Merchant.
The module currently fully supports the mivasql configuration of MIVA Merchant 5. It also supports MySQL as long as load balancing has the data stored on the single MySQL server. This would be the case in most of the server setups. For those that are not, we are in the process of converting the code for that remaining, very small group of MIVA Merchant stores. At this time we have not had a problem. Modules will be moved to the top of the queue as needed.Price: $22.95 Upgrade Cost: $0
Upgrade Terms (If Any): N/A
Compatibility: N/A Versions:
5.x+
Other Module Compatibility: N/A From: Discount Modules / Category Specific Discount Modules
Relevance: 21.57%% Rating: (0) Votes: (0) Hits: (452) Reviews:
Rate It - Review It - Modify It - Report It Bookmark Percent Off Subtotal By Category v5
<-- Just click this link and then add to your favorites! Back to Top
Easily offer a discount based on the basket subtotal. The default is to calculate all product charges (including attribute charges) to determine the total. You can optionally include non-product charges in the calculation. Then in admin, the store owner configures the trigger levels (amount needed to activate the discount) and the corresponding percentage off. The store owner can designate 1 - 4 trigger levels so that he/she can vary the percentage discount based on the amount spent. The store owner can even include a list of product codes that will not be used in the calculation. The discount amount will appear during checkout on the screen after the customer has entered their shipping method. This allows Merchant to include (optionally) any miscellaneous fees or coupons redeemed on the Shipping - Payment selection screen. Use this module for storewide sales and high purchase discounts. MMUI and OpenUI compatible. No editing of mv files required for either user interface. Configuration is setup through Merchant Admin. Price: $19 Upgrade Cost: $0
Upgrade Terms (If Any): N/A
Compatibility: MMUI/OpenUI Versions:
4.14-4.16x (Available Compiled)
Other Module Compatibility: N/A From: Discount Modules / Discount at Checkout Modules
Relevance: 21.57%% Rating: (0.00) Votes: (0) Hits: (528) Reviews:
Rate It - Review It - Modify It - Report It Bookmark Percent Off Subtotal
<-- Just click this link and then add to your favorites! Back to Top
Easily offer an automatic discount based on the basket subtotal. Use this module for storewide sales and high purchase discounts at checkout. Increase the discount percentage at higher subtotals to entice customers to spend more. This module is for MIVA Merchant 5.x. We also have the corresponding module for an older version of Merchant.
Features:
- Discount based on subtotal of the order
- Set up to 4 tiers of discounts
- Store wide discounts
- Optionally apply discount after other discounts have lowered the subtotal
- Discount at checkout shows as a separate line item
- Can exclude specific products from calculation of the discount
- Can change the discount to a surcharge, e.g. due to fuel or raw material fluctuation
Feature Details:
The default is to calculate all product charges (including attribute charges) to determine the total. You can optionally include non-product charges in the calculation. Then in admin, the store owner configures the trigger levels (amount needed to activate the discount) and the corresponding percentage off. The store owner can designate 1 - 4 trigger levels so that he/she can vary the percentage discount based on the amount spent. The store owner can even include a list of product codes that will not be used in the calculation. The discount amount will appear during checkout on the screen after the customer has entered their shipping method. This allows Merchant to take into account (optionally) any miscellaneous fees or coupons redeemed on the Shipping - Payment selection screen.You can even use this module for a surcharge. As example, if your products have a fluctuating fuel or raw material charge and you want to pass that on to the customer, you can change the discount amount from a positive to a negative. So instead of entering a discount of 10%, you would use -10%. The module currently fully supports the mivasql configuration of MIVA Merchant 5. It also supports MySQL as long as load balancing has the data stored on the single MySQL server. This would be the case in most of the server setups. For those that are not, we are in the process of converting the code for that remaining, very small group of MIVA Merchant stores. At this time we have not had a problem. Modules will be moved to the top of the queue as needed. Price: $21.50 Upgrade Cost: $0
Upgrade Terms (If Any): N/A
Compatibility: N/A Versions:
5.x+
Other Module Compatibility: N/A From: Discount Modules / Discount at Checkout Modules
Relevance: 21.57%% Rating: (0) Votes: (0) Hits: (317) Reviews:
Rate It - Review It - Modify It - Report It Bookmark Percent Off Subtotal v5
<-- Just click this link and then add to your favorites! Back to Top
Easily offer a discount based on the number of items in the basket. In admin, the store owner configures the trigger levels (amount needed to activate the discount) and the corresponding percentage off. The store owner can designate 1 - 4 trigger levels so that he/she can vary the percentage discount based on the number of items. The store owner can even include a list of product codes that will not be used in the calculation. The discount amount will appear during checkout on the screen after the customer has entered their shipping method. This allows Merchant to include (optionally) any miscellaneous fees or coupons redeemed on the Shipping - Payment selection screen. This module would be used in a store which has similarly priced items, e.g. DVDs. Buy a certain number and get X% off the total bill. Buy a little higher number and get even more off the bill. You would not use it in a store which had $1 items and $100 items because people would buy several $1 items in order to obtain a discount on the $100 item. Granted, you could use the product code exclusion in this module and provide volume discounts on the high priced items with our Volume Pricing module. MMUI and OpenUI compatible. No editing of mv files required for either user interface. Configuration is setup through Merchant Admin. Version 3.x, 4.x, Available Price: $15 Upgrade Cost: $5
Upgrade Terms (If Any): For v4.x Only Compatibility: MMUI/OpenUI Versions:
4.14-4.16x (Available Compiled)
Other Module Compatibility: N/A From: Discount Modules / Volume and Quantity Discount Modules
Relevance: 21.57%% Rating: (0.00) Votes: (0) Hits: (642) Reviews:
Rate It - Review It - Modify It - Report It Bookmark Percent Off Based on Number of Items
<-- Just click this link and then add to your favorites! Back to Top
This module allows a customer to purchase items which are not in your Merchant database. This is particularly suited for auction winnings, printed catalog items, donations, and classified ad items. It can also be used for sale of services or negotiated price items. Price: $25 Upgrade Cost: $20
Upgrade Terms (If Any): N/A
Compatibility: MMUI/OpenUI Versions:
2.x, 3.x, 4.x, 4.14-4.16x (Available Compiled)
Other Module Compatibility: N/A From: Store Features Modules
Relevance: 21.57%% Rating: (0.00) Votes: (0) Hits: (962) Reviews:
Rate It - Review It - Modify It - Report It Bookmark External Product Purchase
<-- Just click this link and then add to your favorites! Back to Top
|
