Features:
- Discount product prices based on quantity ordered
- Easy from - to price breaks in a single input
- Unlimited price break ranges
- Fixed price or percentage off regular price
- Optional automatic start and stop dates for volume pricing
- Use our time zone offset to adjust the time that the date changes
- Each product can have different price breaks and dates
- Can use price groups with percentage discounts
- Optionally apply price group discount "on top of" volume price breaks
- Can exclude price groups from volume pricing
- Can exclude all except specific price groups
- Hide or display table which depicts price breaks
- Include a quantity input in the table on category pages
- Volume price can be applied on identical products or can amalgamate
- Can amalgamate discounts of different attributes in the same product
- Optional "as low as" to replace regular price
- Optional strike thru of regular price followed by volume price
- Can put all or some of your store products on sale within seconds
- Can remove all volume pricing in the store within seconds
- Flat file import for quick update
- Optional wild card can apply same volume pricing to all products
- Export volume pricing settings to flat file
- Use render tokens to place "as low as" and table on applicable screens
- Licensed by domain, unlimited stores under one MIVA Merchant mall pay no additional license fee
Feature Details:
This module's admin interface provides an easy to enter "from - to cost" format. You can literally have as many ranges as you want to type in. See the image below for example syntax. You can either use actual values to replace the base price or percent of price to be subtracted from the product base price. These price differentials are added directly in the admin interface under the product edit screen. You only apply these price differentials in the products that you want to use them.
This module applies the price in your low,high, cost groupings. If you do not include a grouping at the single item level, it will use the method for pricing in your store. It onlyactivates if you include a low, high, cost grouping. For example:
6|10|12%
11|20|14%
21|999|16%
The module only uses price groups when using the percentoff discount calculation. If you enter fixed prices for the quantity ranges, then price groups are ignored. Keep in mindthat the percent discounts could be over and above the discountalready given if you are using price groups.
You can opt to not give the price group an additional discount above the volume pricing. You can even make all or some price groups not eligible for volumepricing and hide the table from them completely. Conversely,you can exclude everybody from volume pricing except specific price group members. Customers must be logged in to identify the price group they are in before the volume pricing module can qualify or disqualify them from volume pricing if you are using the price group restrictions.
The percentage discounting method subtracts the percent discount from the base price. Base price does not include attribute prices. To apply the percentage, simply include the percent symbol (%) in the line. If you are using cost method for your store (other than price groups), you will not be able to use the percentage discounting method. Instead, use the actual value method.
If you are using another third party module which overrides prices in the basket and recomputes them using the price in the product record, youmay not be able to use this module. Other third party modules may notrecognize that it needs to apply the calculations in this module.
The module recognizes identical products. Hence different product codes will change the product enough that the discountwon't apply. For example 3 red shirts and 6 blue shirts willnot give the discount of 9 shirts. Rather, they'll get the discount rate of 3 for one of the line items and 6 for the other.
You can amalgamate quantities so in the example above, as long as the product code is the same and the color variation is done with attributes, all 9 items would get the volume discount for 9 items. You have the option for each product code to amalgamate quantities or treat varied attributes as different products.
You can optionally include a table on the product (PROD) andcategory (CTGY) screens displaying the rates as generatedfrom the products' volume discount record. You can optionallyhave a quantity input in that table display on the category screen. These options areconfigured through admin.
If you want to have a sale on one or moreitems. Simply set the volume to 1 or more with a specific discount percentage and you have a sale with as low as display. You can use the token %product_price_f% to further highlight that witha strike thru. To make this feature even more useful, youcan enter a starting and ending date for the sale so that itwill start and end automatically.
For ease of entry, a flat file import module is included. You can put all product codes in the flat file or use an asterisk (*) and one lineof "rules" to apply the volume price to all products in thestore. Create a storewide sale, e.g. 10% off in seconds with a specific start and stop date. Then just as quickly removeall settings at your leisure after the sale. There is also a volume price export so you can quickly build your flat file, then edit or add to it. This is useful when you want to have a storewide sale on all products butretain volume prices on your regularly discounted items. Export the volume prices. Import your sale settings. Importyour volume discounts on the few you want to maintain at pre-sale prices. The module currently fully supports the mivasql configuration of MIVA Merchant 5. It also supports MySQL as long as load balancing has the data stored on the single MySQL server. This would be the case in most of the server setups. For those that are not, we are in the process of converting the code for that remaining, very small group of MIVA Merchant stores. At this time we have not had a problem. Modules will be moved to the top of the queue as needed. Price: $35.00 Upgrade Cost: $0
Upgrade Terms (If Any): N/A
Compatibility: N/A Versions:
5.x+
Other Module Compatibility: N/A From: Discount Modules / Volume and Quantity Discount Modules
Relevance: 52.95%%  Rating: (0) Votes: (0) Hits: (982) Reviews:
Rate It - Review It - Modify It - Report It Bookmark Volume Pricing v5
<-- Just click this link and then add to your favorites! Back to Top
This module allows you to automatically include attribute or option price information in the attribute prompt shown when adding a product to your basket. These prices are dynamically generated based on any price groups, discounts, currency formatting (including conversions using our CurrencyTrk module) or other dynamic changes the shopper may be affected by. It also simplifies administration - if you hard-code price information into attribute prompts, not only will it not change based on the shopper's currency settings, price groups, etc., but if you have a price change you will need to update the price in two separate places for each attribute or option. With this module all price displays are updated automatically. Admin configuration options allow you to specify the format of the display using special tokens for the original prompt and the attribute/option price. Each different attribute type (Radio Buttons, Checkboxes, etc) can have different display formatting settings for both attributes with a price, and those without (free attributes). Price: $24.95 Upgrade Cost: $0
Upgrade Terms (If Any): Terms
Compatibility: MMUI/OpenUI Versions:
4.x, 4.14-4.23x (Available Compiled)
Other Module Compatibility: N/A From: Attributes Modules / Attributes Price Display Modules
Relevance: 47.20%%  Rating: (0.00) Votes: (0) Hits: (1152) Reviews:
Rate It - Review It - Modify It - Report It Bookmark Show Attribute Price
<-- Just click this link and then add to your favorites! Back to Top
Charge your customers by the variable size of the item they are ordering. This module is used to calculate prices on items which are priced, e.g. by the foot, by the inch, or other units of measure. This is particularly useful when the store owner does not want to have a pull down select list of infinite values. The module also eliminates the common hack that stores have used which involved using the number of the items added to the basket to adjust charges. This module allows the customer to specify two dimensions (e.g. length and width) as item attributes on the product screen (PROD) and still be able to order more than one of that item. Not for upsell products. For example, ordering four 8" X 10" picture frames involves entering 8 in the length attribute and 10 in the width attribute and entering 4 in the add to basket quantity input. The store owner determines the storewide number of free units (if any), e.g. square inches, and the lowest and the highest values that can be used in the measurement. The store owner can also use price groups to vary the dimension pricing for applicable customers. The attributes type is usually text but could be select list pull down. It cannot be a template. The attribute prompts can read whatever the store owner desires to direct the customer to enter the numeric measurement. If you are using our Attribute Prompt vs Code module, that prompt will also display on the basket, invoice and emails instead of the attribute code. The store owner's settings are configured in admin. The customer enters the dimensions to form the combined units (e.g. square inches) and the module calculates the price based on the calculated units times the price of the first dimension attribute. Version 4.x Available Price: $25 Upgrade Cost: $5
Upgrade Terms (If Any):
Compatibility: MMUI/OpenUI Versions:
4.14-4.16x (Available Compiled)
Other Module Compatibility: N/A From: Special Pricing Hide Prices Modules
Relevance: 46.46%% Rating: (0.00) Votes: (0) Hits: (1519) Reviews:
Rate It - Review It - Modify It - Report It Bookmark Dimension Pricing
<-- Just click this link and then add to your favorites! Back to Top
Discount your product prices based on the number
of items ordered of identical products, eg 1-3 =
standard price, 4-6 = lower, etc. The admin interface provides an easy to enter "from - to cost" format. You can literally have as many ranges as you want to type in. See the image below for example syntax. You can either use actual values or percent of price to be subtracted from the product price. These price differentials are added directly in the admin interface under the product edit screen. You only apply these price differentials in the products that you want to use them. This module applies the price in your low, high, cost groupings. If you do not include a grouping at the single item level, it will use the method for pricing in your store. It only activates if you include a low, high, cost grouping.
For example:
6|10|12%
11|20|14%
21|999|16% The module only uses price groups when using the percent off discount calculation. If you enter fixed prices for the quantity ranges, then price groups are ignored. Keep in mind that the percent discounts will be over and above the discount already given if you are using price groups. 
In the compiled version you can opt to not give the price group an additional discount above the volume pricing. You can even make all or some price groups not eligible for volume
pricing and hide the table from them completely. Customers
must be logged in to identify the price group they are in before
the volume pricing module can disqualify them from volume pricing.
The percentage discounting method subtracts the percent discount from the base price. Base price does
not include attribute prices. To apply the percentage,
simply include the percent symbol (%) in the line. If
you are using cost method for your store (other than
price groups), you will not be able to use the percentage
discounting method. Instead, use the actual value method. If you are using another third party module which overrides prices in the basket and recomputes them using the price in the product record, you will not be able to use this module. Other third party modules will not
recognize that it needs to apply the calculations in this module. The module recognizes identical products. Hence different attributes will change the product enough that the discount won't apply. For example 3 red shirts and 6 blue shirts will not give the discount of 9 shirts. Rather, they'll get the discount rate of 3 for one of the line items and 6 for the other.
The module for the compiled version of merchant DOES have the ability to amalgamate quantities so in the example above as long as the product code is the same, all 9 items would get the volume discount for 9 items. You have the option for each product code to amalgamate quantities or treat varied attributes as different products. You can optionally include a table on the product (PROD) and category (CTGY) screens displaying the rates as generated from the products' volume discount record. You can see an example of that with our best seller products. You can optionally have a quantity input in that table display. These options are configured through admin.
New in the compiled version is compatibility interface with the OpenUI Tokens and Viking Coders product template module. Place the table display on the product page so that it better fits your desired look. New configuration options added for the table display. Also, the ability to display the lowest price in place of the standard price when volume pricing effects the product, the store is using the OpenUI, the store is version 4.14 or higher, and there are no other 3rd party modules effecting the price display. This feature is useful if you want to have a sale on one or more items. Simply set the volume to 1 or more with a specific discount percentage and you have a sale with as low as display. You can use the token %product_price_f% to further highlight that with a strike thru. To make this feature even more useful, you can enter a starting and ending date for the sale so that it will start and end automatically. For ease of entry, a flat file import module is included. You can put all product codes in the flat file or use an asterisk (*) and one line of "rules" to apply the volume price to all products in the store. Create a storewide sale, e.g. 10% off in seconds with a specific start and stop date. Then just as quickly remove all settings at your leisure after the sale. There is also a volume price export so you can
quickly build your flat file, then edit or add to it. This
is useful when you want to have a storewide sale on all products but retain volume prices on your regularly discounted items. Export the volume prices. Import your sale settings. Import your volume discounts on the few you want to maintain at
pre-sale prices. The volume price can also be used in our compiled
Fast Data Feed module for
froogle submissions and our
Static Catalog Generator which creates static html pages for better search engine indexing. Price: $29.50 Upgrade Cost: $15
Upgrade Terms (If Any): N/A
Compatibility: MMUI/OpenUI Versions:
2.x, 3.x, 4.x, 4.14-4.16x (Available Compiled)
Other Module Compatibility: N/A From: Discount Modules / Volume and Quantity Discount Modules
Relevance: 44.99%% Rating: (9.00) Votes: (2) Hits: (1920) Reviews:
Rate It - Review It - Modify It - Report It Bookmark Volume Pricing
<-- Just click this link and then add to your favorites! Back to Top
Charge your customers by the number of letters or words customers include in a textfield attribute called PHRASE-L or PHRASE-W respectively. This module is used to calculate individual entity pricing for engraving, embroidering, etc. In Merchant version 3.x, the phrase can be in either a text input or textarea input. In Merchant version 2.2x, the text input is the only attribute available. The customer enters the phrase and the module calculates the price based on the number of letters/words and the base price of the attribute. The store owner determines if it will be a word count or letter count by the attribute code, i.e. PHRASE-W or PHRASE-L. Not for upsell products. Versions 2.x, 3.x, 4.x Available Price: $20 Upgrade Cost: $5
Upgrade Terms (If Any): For 4.x Only Compatibility: MMUI/OpenUI Versions:
4.14-4.16x (Available Compiled)
Other Module Compatibility: N/A From: Special Pricing Hide Prices Modules
Relevance: 42.92%% Rating: (0.00) Votes: (0) Hits: (1323) Reviews:
Rate It - Review It - Modify It - Report It Bookmark Entity Count Pricing
<-- Just click this link and then add to your favorites! Back to Top
Charge your customers by the number of letters or words customers include in a text field attribute called PHRASE-L or PHRASE-W respectively. This module is used to calculate individual entity pricing for engraving, embroidering, etc. The attribute can be in either a text input or textarea input. This module is for MIVA Merchant 5.x. We also have the corresponding module for an older version of Merchant.The customer enters the phrase and the module calculates the price based on the number of letters/words and the base price of the attribute. The store owner determines if it will be a word count or letter count by the attribute code, i.e. PHRASE-W or PHRASE-L. Not for upsell products. The module currently fully supports the mivasql configuration of MIVA Merchant 5. It also supports MySQL as long as load balancing has the data stored on the single MySQL server. This would be the case in most of the server setups. For those that are not, we are in the process of converting the code for that remaining, very small group of MIVA Merchant stores. At this time we have not had a problem. Modules will be moved to the top of the queue as needed. Price: $22.95 Upgrade Cost: $0
Upgrade Terms (If Any): N/A
Compatibility: N/A Versions:
5.x+
Other Module Compatibility: N/A From: Special Pricing Hide Prices Modules
Relevance: 42.92%% Rating: (0) Votes: (0) Hits: (972) Reviews:
Rate It - Review It - Modify It - Report It Bookmark Entitiy Count Pricing v5
<-- Just click this link and then add to your favorites! Back to Top
The NetPush Advanced Inventory Module allows Miva Merchant store owners to track inventory within Miva Merchant all the way down to the attribute/option level. The module has numerous configuration settings that should allow the admin to display and track any simple or complex inventory configuration. Inventory levels are only adjusted at checkout time so there is no need to worry about old baskets causing inventory problems. The module comes with an import and export module that allows administrators to easily update inventory levels by using csv files. We suggest using template modules like Viking Coder's Product Templates and
Category Templates if you want better control of the look and feel of your pages with regards to inventory. This will allow you to use tokens for display. Otherwise, you will have to settle for built in hook point displays that are built into the module and are configurable through the administration area. The Advanced Inventory Module will send email when stock goes below certain configurable low stock level and can disable products when stock goes below the out of stock level. Administrators can also customize every message shown to the user. Fine grain customizations are made easy because the module allows product level configuration settings the ability to override global inventory configuration settings. This allows Miva Merchant Administrators the ability to customize inventory configurations for every product, if he or she wishes.
Notes: - OpenUI Tokens
This module can be used with OUI OpenTokens. To use the module with Viking Coders template modules, see the OpenToken instructions and examples in the documentation on the NetPush.com site.
- Product Upsell
This module does not show stock information on the product upsell screens at this time. Stock is still tracked in the basket and checkout, but no current stock level is shown on the upsell screens during checkout unless you are using alternatives like tokens in templates.
- Basket Redirect and Error Message
The user is automatically redirected to the basket screen if he or she adds items to the basket that makes the product go out of stock or if the product is already out of stock. The error message is shown above the basket screen using a hook point in the Open UI. The message is configurable in the admin area.
- Checkout Screen Error
If configuration is setup to do so, the module will block a user from checking out if their basket has an item that is out of stock. This message is shown automatically at the top of the screen. The message is configurable in the admin area.
- Pipes ( | )
Product codes, attribute codes, and option codes must not contain the pipe character. NetPush Advanced Inventory uses the pipe to delimit for lookups. Pipes in your codes will cause the module not to work correctly.
Requirements: - Open UI 4.723+
This module requires that you have OpenUI installed in your store. The module uses hook points in the OpenUI. You must have OpenUI version 4.723 or higher if you plan to use the OpenToken functionality available in this module. Please see the OpenUIsite for information about latest versions and bug fixes.
- Miva Empressa 3.96+
This module requires that you have Miva Empressa 3.96 or higher. The module uses functionality that is only available in newer versions of the Empressa Engine. Miva regularly releases new versions of Miva Empressa and the Virtual Machine to add new functionality and fix bugs. If you are on an older version, consider contacting your hosting company. You can find the Miva Empressa version at the top left hand of your Store Administrator when you first login. It should show your Miva Merchant version and your Miva Empressa version.
- Miva Merchant 2.x, 3.x, and 4.x
This module should work with most versions of Miva Merchant. In order to use the deactivate product option, you must be on version 3.0+. All testing and development was done on versions 4.13+.
Global Configuration Screen All inventory settings will use the global configuration settings found in the Miva Merchant Administration area under Stores > Your Store > System Extension Configuration > NetPush Advanced Inventory. One may override these settings for products (see product level settings below). Each product must also be manually turned on before tracking starts. See product settings below.
Configuration Settings
- Use NetPush Inventory
You must set this to "Yes" if you want the module to be turned on. If this is set to "No", the module will not do anything.
- Amount considered out of stock
Usually this would be 0, but it can be set to any number, including negative numbers. Once the stock level reaches this number, it will be considered out of stock.
- Deactivate when product level is out of stock
In Miva Merchant versions that support it, the module will turn the Active flag for a product to off, if the product reaches the out of stock level. This only works on the product level, not for the attribute/option level.
- Allow purchase even after out of stock
Turning this on will allow customers to purchase products even after they go below the out of stock level. This could be a backorder situation.
- Automatically remove from basket
When a user adds products to the basket, the products will be removed if it makes the inventory go below the out of stock level and the admin is not allowing purchases when products are out of stock. Please take note that this option could cause problems if other modules are installed that also act on the basket.
- Send Low Inventory Notices
Turn this on to receive email warnings when inventory goes below the low inventory level.
- Amount considered low
The level that is considered low. Use this setting to trigger emails that will warn you when inventory is hitting a low level.
- Low Email To Address
Set this to the email address of the person who should be receiving emails when stock is at a low level.
- Low Email From Address
Set this to the email address that should be set as the from address in low stock emails.
- Low Email Subject
The subject of the low stock email. This field has token replacement.*
- Low Email Body
This is the body of the low stock email. This field has token replacement.*
- Automatically change stock levels
Turn this on if you want the system to subtract stock when a user purchases. If this is set to "No", the system will not update stock levels.
- Show out of stock messages
Turn this on to show out of stock messages on the product page when stock goes below the out of stock level.
- Show in stock messages
Turn this on to show how much stock is left on the product page.
Out of Stock Messages* - Product Level
This message is shown to the user on the product page below the shipping weight.
- Attribute Level - Checkbox
This message is shown to the user on the product page next to a checkbox option.
- Attribute Level - Radio Buttons
This message is shown to the user on the product page next to each radio button option.
- Attribute Level - Select Box
This message is shown inside of the drop down on a select box. HTML should not be used here.
In Stock Messages* - Product Level
This message is shown to the user on the product page below the shipping weight.
- Attribute Level - Checkbox
This message is shown to the user on the product page next to a checkbox option.
- Attribute Level - Radio Buttons
This message is shown to the user on the product page next to each radio button option.
- Attribute Level - Select Box
This message is shown inside of the drop down on a select box. HTML should not be used here.
Other Messages* - Out of Stock - Basket Line Marker
This helps the user to see which products have gone out of stock when looking at the basket. A red asterisks may be a good indicator for the user.
- Out of Stock - Basket
This message is shown to the user above the basket when a product has gone out of stock when adding, updating, or looking at the basket. Products can go out of stock at anytime, even after a user adds it to their basket. This is because stock levels only change after checkout.
- Out of Stock - Checkout
This message is similar to the out of stock basket message. It is shown on the payment screen during checkout. This should be considered one final inventory check before allowing the user to purchase.
* Token Replacement
This module has a few built in tokens for messages that allow you to give yourself and the user more detailed information. Some of the tokens below can only be used on certain screens, or in emails.
%%stock%% - Displays the current stock level. (1,2,3)
%%basket_quantity%% - Displays the amount in the basket and is unlikely to be used. (1,2)
%%available%% - Displays the amount of stock left before hitting the out of stock level. (1,2,3)
%%oos_level%% - Displays the out of stock level. (1,2,3)
%%line_items%% - Displays a list of line items that are effected. (1,2)
%%product_id%% - Displays the product id. (1,2,3)
'%%product_code%% - Displays the product code. (1,2,3)
%%product_name%% - Displays the product name if available. (3)
%%attribute_code%% - Displays the attribute code, or None if the effected product is only being tracked at the product level. (1,2)
%%option_code%% - Displays the option code, or None if the affected product is only being tracked at the product level. (1,2)
1. Is used for the low stock email body and subject
2. Is used for the out of stock basket message and out of stock checkout message
3. Is used for the in stock and out of stock messages on the product pages.
Product Configuration Screen All inventory settings will use the global configuration settings found in
the Miva Merchant Administration area under Stores > Your Store > System Extension Configuration > NetPush Advanced Inventory. To override these settings at the product level, go to the product in the administration area and click on "NetPush Advanced Inventory". You will see the settings below. Configuration Settings
- Use NP Inventory on this Product
You must set this to "Yes" if you want to track inventory on the product. You must manually set this to "Yes" for every product that you want to track. If this is not set to "Yes", no inventory tracking will take place. By default, no product is tracked.
- Override Global Settings
If this is set to "Yes" the configurations settings will be taken from the individual product screen instead of from the Global configuration settings found under under system extension configuration. If set to "No", the module will use the global settings from above when doing inventory for the product. The default is to use the global settings.
- Amount considered out of stock
Overrides same setting under Global Configuration.
- Deactivate when product level is out of stock
Overrides same setting under Global Configuration.
- Allow purchase even after out of stock
Overrides same setting under Global Configuration.
- Automatically remove from basket
Overrides same setting under Global Configuration.
- Send Low Inventory Notices
Overrides same setting under Global Configuration.
- Amount considered low
Overrides same setting under Global Configuration.
- Low Email To Address
Overrides same setting under Global Configuration.
- Low Email From Address
Overrides same setting under Global Configuration.
- Low Email Subject
Overrides same setting under Global Configuration.
- Low Email Body
Overrides same setting under Global Configuration.
- Automatically change stock levels
Overrides same setting under Global Configuration.
- Show out of stock messages
Overrides same setting under Global Configuration.
- Show in stock messages
Overrides same setting under Global Configuration.
Out of Stock Messages* - Product Level
Overrides same setting under Global Configuration.
- Attribute Level - Checkbox
Overrides same setting under Global Configuration.
- Attribute Level - Radio Buttons
Overrides same setting under Global Configuration.
- Attribute Level - Select Box
Overrides same setting under Global Configuration.
In Stock Messages* - Product Level
Overrides same setting under Global Configuration.
- Attribute Level - Checkbox
Overrides same setting under Global Configuration.
- Attribute Level - Radio Buttons
Overrides same setting under Global Configuration.
- Attribute Level - Select Box
Overrides same setting under Global Configuration.
Other Messages* - Out of Stock - Basket Line Marker
Overrides same setting under Global Configuration.
- Out of Stock - Basket
Overrides same setting under Global Configuration.
- Out of Stock - Checkout
Overrides same setting under Global Configuration.
Setting Product Inventory Levels
 The administrator can set product inventory levels by going to the product page within the Miva Merchant admin area and clicking on NetPush Advanced Inventory. This is the same screen as the product level configuration. Product inventory levels are shown below the configuration area. To add new inventory, use the yellow add button. To edit inventory, click white add button next to the inventory entry.
The module checks inventory by looking at a unique combination of Product Code, Attribute Code, and Option Code. When entering stock levels, you enter the codes separated by a pipe. For example, shirt1|color|red, where shirt1 is the product code, color is the attribute code, and red is the option code. If you do not set an inventory level for an existing product attribute combination, no tracking is done. Setting a stock level of -9999 has the same effect. Inventory at a product level
You may choose to only track inventory at a product level in combination with or not at an attribute level. To enter a stock level for a product, simply use prodcode||. This tells the system that you are tracking the product code, but not the attributes or options by leaving them blank. Using -9999 for a stock level will temporarily turn inventory tracking off. Inventory at the attribute level (checkbox, select box, radio buttons)
Checkbox - prodcode|attrcode|(the last field should be left blank, as checkboxes have no options)
Select Box and Radio Buttons - prodcode|attrcode|optcodeAll 3 are required and must be unique, even if you are using attribute templates. If you are using normal templates in combination with attribute templates, make sure you do not give them duplicate code names.
Using Advanced Inventory with Template Modules and OpenTokens
The Advanced Inventory Module can be used with 3rd party template modules like the ones from Viking Coders by using Open UI tokens on product pages to display current inventory levels. Please note that token support has not been completely tested as of yet.
%module|npinventory|stock_level%
Returns the stock level for the product, attribute, option combination. To ensure that this works correctly, you should set g.NPI_Product_Code, g.NPI_Attribute_Code, and g.NPI_Option_Code to the current product code, attribute code, and option code. On a checkbox, make sure to set g.NPI_Option_Code = ''. On a product level, make sure to set the attribute and option variables to ''. After these globals are set, call the token. If the return value is -9999, the item is not being tracked.
%module|npinventory|stock_available%
Same as above but shows the amount available.
%module|npinventory|oos_level%
Same as above but shows the out of stock level. %module|npinventory|stock_list%
This token will set a global variable that contains an array of structures. You must set g.NPI_Product_Code equal to the current product code before calling the token. This array contains all of the product code, attribute code, and option code combinations for a specific product. It also contains the available stock, out of stock level, and other information shown below. This token makes it easy to create a stock table using OpenUI tokens in Viking Coders templates or in a product header or footer. Code examples are available in the help pages on the NetPush.com site.
Array Structure:
g.NP_Inventory_StockList[i]:attribute_code - Attribute Code
g.NP_Inventory_StockList[i]:option_code - Option Code
g.NP_Inventory_StockList[i]:stock_level - Stock Level
g.NP_Inventory_StockList[i]:oos_level - Out of stock level
g.NP_Inventory_StockList[i]:available - Stock Level minus out of stock level
g.NP_Inventory_StockList[i]:allow_pur - Allow purchases even if out of stock from admin settings
g.NP_Inventory_StockList[i]:low_amount - Low amount from admin settings
g.NP_Inventory_StockListLen - Variable that tells you how many items are in the array (represented by i above)
Price: $149 Upgrade Cost: $0
Upgrade Terms (If Any): N/A
Compatibility: OpenUI Versions:
4.x, 4.14-4.16x (Available Compiled)
Other Module Compatibility: N/A From: Inventory Modules
Relevance: 42.63%% Rating: (0.00) Votes: (0) Hits: (2001) Reviews:
Rate It - Review It - Modify It - Report It Bookmark NetPush Advanced Inventory
<-- Just click this link and then add to your favorites! Back to Top
Allow your customers to enter an offer price for a product that is in your products database. You can also use it for auction high bidder purchases. This module is similar to our External Product Purchase module. The difference is that Override Pricing is best suited for products that are actually in your inventory so the customer sees the product image, description, etc that they are offering/bidding on. With External Product Purchase, the customer is seeing a generic
product page where they enter the product name, ID, offer/bid price, and weight.
The offer or high bid is entered into the text attribute on the product page. The price in the basket reflects that customer entered offer/bid price. The order will then continue as normal. However, you can create a disclaimer that if the offer/bid is not accepted, the order will be cancelled and payment refunded. Consult with an attorney on the best wording for your disclaimer as you would not want to be required to sell at their entered price.
The attribute for the override pricing input can also be modified in admin if you are using the OpenUI. You can select to shorten the input to 10 characters (size) or you can even make it a hidden input. You can also have regular product attributes on the same product page. For example, you may want to have an optional auction ID in case the item is going to be sold in store and/or through auction. The link from the auction win could include the auction ID and it would also pre-filled when clicked.
There are also some examples of links and .htaccess re-write rules for making short url links for typical uses of this module in its online install/usage doc.
Limitation: There are some 3rd party modules which change the price in the basket AFTER the item has already been added to the basket. Most notable are those which re-do all of the prices if a customer is in a price group but forgot to login at the beginning of shopping. If you are going to get one of those modules, make sure it 1) only changes the
price if the basket price and actual product price are the same (which means no special actions had been taken on the price when it was put in the basket initially), 2) it does not make the basket price higher than the current basket price as the Override Price module which controlled the actual addition of the item to the basket should be the module to determine the offer/bid price. If you already have a module which makes those sweeping basket price changes without regard for the module that put the product in the basket, you may want to contact that module's developer to see if they could add the two simple rules above to their logic to reduce module conflict. Price: $35 Upgrade Cost: $0
Upgrade Terms (If Any): N/A
Compatibility: OpenUI Versions:
4.14-4.16x (Available Compiled)
Other Module Compatibility: N/A From: Special Pricing Hide Prices Modules
Relevance: 41.74%% Rating: (0.00) Votes: (0) Hits: (1248) Reviews:
Rate It - Review It - Modify It - Report It Bookmark Override Pricing
<-- Just click this link and then add to your favorites! Back to Top
This extension module 'cleans up' the basket and invoice/email display of attributes, consolidating all attribute pricing information into the actual product price. Price: $35 Upgrade Cost: $0
Upgrade Terms (If Any): Terms
Compatibility: OpenUI Versions:
3.x, 4.x, 4.14-4.23x (Available Compiled)
Other Module Compatibility: N/A From: Attributes Modules / Attributes Price Display Modules
Relevance: 40.27%%  Rating: (0.00) Votes: (0) Hits: (1225) Reviews:
Rate It - Review It - Modify It - Report It Bookmark Attribute Price Display
<-- Just click this link and then add to your favorites! Back to Top
Take a look over the shoulder of a Miva Merchant professional as he takes you through every step, every module (almost), every function. Complete with "live" comments unedited, you'll learn while feeling like you're sitting next to a Miva Guru. This tutorial subscription is different than all other Miva Merchant training methods because it is constantly updated, there are OpenUI and MMUI tutorials, as well as extensive tutorials on most popular third party modules, including offline products like Storeman. With the cooperation of third party developers, when a module is updated, or a new module is released, Merchant How To will create a new tutorial. - Setting Up Your First Miva Merchant Store
- Getting Into Admin
- Adding a Product
- Adding a Category
- Global Headers/Footers, etc.
- Attribute Templates
- Edit Store Admin Tour
- Images
- The Nav Bar
- The Category Tree
- Upselling
- Related Products
- Availability Groups
- Price Groups
- Managing Customers
| - Shipping Methods
- Payment Methods
- Order Processing
- Basic Maintenance
- Installing Modules
- Downloading and Installing Miva Mia
- Installing OpenUI
- Updating OpenUI
- OpenUI Tour
- OpenTokens
- Accounts/Login
- Creating a Mini Basket
- Adding a Second Store
- Adding OpenUI to Second Store
| | Plus Third Party Modules and Software such as: | | | | Plus Offline Tools such as: | | | | And more as it is released. Click the link to see examples of tutorials. | |
NOTES: Please allow up to 24 hours for activation. Tutorial Flash files can be large, so it is recommended that you have a broadband Internet connection to enjoy the tutorials. This tutorial subscription is new, so not all tutorials listed at MerchantHowTo.com are immediately available. Also, since this subscription is essentially electronic distribution of knowledge, and since there are several examples and a list of tutorials available prior to purchase, no refunds can be granted on these tutorials. |
Price: $599.95 Upgrade Cost: $0
Upgrade Terms (If Any): N/A
Compatibility: MMUI/TemplateUI/OpenUI Versions:
1.x, 2.x, 3.x, 4.x , 4.14-4.23x (Available Compiled)
Other Module Compatibility: N/A From: Support Tutorials for Miva Merchant
Relevance: 39.09%% Rating: (10.00) Votes: (1) Hits: (2039) Reviews: (2)
Rate It - Review It - Modify It - Report It Bookmark Miva Merchant Tutorials Subscription
<-- Just click this link and then add to your favorites! Back to Top
Your client can login and get the price you've negotiated or assigned to them. You can have unlimited amount of price lists.
EXAMPLE: Client A can get Product A for $99.95. Client B can get Product A for $109.95 while the customer that hasn'tnegotiated with you and logs in, or not, gets the default price of Product A at $129.95.
Requirements: compiled Merchant 4/CBS Dynamic Templates/ftp access to your stores mivadata folder. Tokens for use in DT are explained in the Tokens_readme.txt available in the distribution.
Pre-Documentation Benefits of the module: Your client can login and get the price you've negotiated or assigned to them. You can have unlimited amount of price lists. In other words: Client A can get Product A for $99.95. Client B can get Product A for $109.95 while the customer that hasn't negotiated with you and logs in, or not, gets the default price of Product A at $129.95. How module works: Admin: During install, the module creates example files, customer.dat and pricelist.dat. The Admin or store operator edits these files and places them back in the IDS_WHOLESALE folder -- probably via FTP. You add Customer logins and a price list filename to the customer.dat file. The customer.dat filename is assigned in the System admin. Also, the filename doesn't have to be customer.dat. On Linux/Unix(and maybe some Winserver configs), you will need to beware of case in the filenames. We suggest to keep lowercase filenames. The pricelist.dat is the referenced file that stores the prices of any or all the products available to this list. There can be more than one list -- as many as you need. The customer.dat points the specific user to a a specific list. The list stores specific prices to specific products.There is no calculation in terms of percentages, etc. End User: When your customer/client logs in, they will see the product price display based on the assigned list. If the user is in the customer.dat file with an assigned pricelist filename, product price will be from the price list instead of the MM product database. If a product is NOT in the assigned list, the products displayed price will be the default from the stores product database. If the user isn't in your customer.dat, they will only see default pricing from the stores products database. Price: $144.95 Upgrade Cost: $0
Upgrade Terms (If Any): N/A
Compatibility: OpenUI Versions:
4.14-4.24x (Available Compiled)
Other Module Compatibility: N/A From: Account Screen Modules
Relevance: 38.50%% Rating: (0.00) Votes: (0) Hits: (954) Reviews:
Rate It - Review It - Modify It - Report It Bookmark Wholesale Pricing DT
<-- Just click this link and then add to your favorites! Back to Top
Bulk DiscountingAll your volume discounting needs wrapped up into one module. Volume Pricing Pro allows you to discount your products based on volume ordered at a category, product, or storewide level. Your discounts can be a flat amount, percantage, or combination of both. An example would be: - 1 Widget = $10.00
- 5 Widgets = 10% Off ($9.00 ea)
- 10 Widgets = 15% Off ($8.50 ea)
Features Include: - Product Level Volume Discounts
- Category Level Volume Discounts
- Storewide Level Volume Discounts
- Flat, Percenatage, or Combination Discounts
- Unlimited Discount Levels
- Product Grouping
- Product Exclusion
- Price Group Exclusion
- Attribute Discounting
Please note that if you use another module to discount product prices, this module may not work correctly for you. Please contact us regarding any concerns. Price: $54.95 Upgrade Cost: $0
Upgrade Terms (If Any): N/A
Compatibility: MMUI/OpenUI Versions:
4.14-4.24x (Available Compiled)
Other Module Compatibility: N/A From: Discount Modules / Volume and Quantity Discount Modules
Relevance: 34.07%% Rating: (0.00) Votes: (0) Hits: (1153) Reviews:
Rate It - Review It - Modify It - Report It Bookmark Quantity Price Break Manager
<-- Just click this link and then add to your favorites! Back to Top
Volume pricing at the category level. Easily offer a discount based on the number of items in the basket and the categories those items are in. Features: (some features are only in the compiled version - see details)
- Discount based on number of items ordered
- Set up to 4 tiers of discounts per category group
- Can have 8 groups (each containing one or more categories), each with 4 different discount tiers
- Category wide, multi-category or store wide discounts
- Optionally apply discount after other discounts have lowered the subtotal
- Discount shows at checkout as separate line item
- Optionally display updated discount in basket prior to checkout if using compiled OpenUI
- Can use wildcard instead of entering category codes for the group
- Can exclude a single price group, e.g. Wholesale, from receiving the discount
- MMUI and OpenUI compatible Feature Details:
The default is to calculate product charges in the specified category(ies) (including attribute charges) to determine the subtotal to discount. You can optionally include non-product charges in the calculation. In admin, the store owner configures the trigger levels (number of items needed to activate the discount) and the corresponding percentage off. The store owner can
designate 1 - 4 trigger levels so that he/she can vary the percentage discount based on the number bought. Reward the customer; the more the customer buys, the higher the discount percentage. The store owner then includes a list of category codes that will be used in the calculation. Use this module for category-wide or store-wide discounts. The discount amount will appear during checkout on the screen after the customer has entered their shipping method. This allows Merchant to include (optionally) any miscellaneous fees or coupons redeemed on the Shipping - Payment selection screen so the subtotal will be adjusted before the discount. Additional features are in the compiled version of the module for
Merchant 4.14 and newer. In admin you can setup eight separate groups with their own four-tiered discount and categories. Hence, if you want to discount one category of products with one set of rules (levels) and another category with a different set of rules, you can now do this. Multiple categories can be assigned to each group. As the basket is scanned, the quantities are subtotaled for each group. The discount is applied based on each group's rules, then summed together at checkout. If you are using the OpenUI, you can optionally display the
updated discounts prior to checkout in the regular basket screen. In admin, you can choose
one price group, e.g. Wholesale, which is not eligible for the discount since they
presumably already benefit from significantly lower prices. You can use the asterisk (*) to replace the category codes. When the module encounters the asterisk instead of category codes, it considers all further products eligible. As example, the asterisk in the first group would make all products in the store eligible for the discount. On the other hand, category codes in the first group would apply the first group rules to those categories. Then if there is an asterisk in the second group, all other products in the store would use those discount rules. MMUI and OpenUI compatible. No editing of mv files required for either user interface for standard functioning. Configuration is setup through Merchant Admin. 3.x Version Available Price: $25 Upgrade Cost: $10
Upgrade Terms (If Any): N/A
Compatibility: MMUI/OpenUI Versions:
3.x, 4.x, 4.14-4.16x (Available Compiled)
Other Module Compatibility: N/A From: Discount Modules / Category Specific Discount Modules
Relevance: 32.60%% Rating: (0.00) Votes: (0) Hits: (1286) Reviews:
Rate It - Review It - Modify It - Report It Bookmark Percent Off Based on Quantity by Category
<-- Just click this link and then add to your favorites! Back to Top
Volume pricing at the category level. Easily offer a discount based on the number of items inthe basket and the categories those items are in. This module is for MIVA Merchant 5.x. We also have the corresponding module for an older version of Merchant.
Features:
- Discount based on number of items ordered
- Set up to 4 tiers of discounts per category group
- Can have 8 groups (each containing one or more categories), each with 4 different discount tiers
- Category wide, multi-category or store wide discounts
- Optionally apply discount after other discounts have lowered the subtotal
- Discount shows at checkout as separate line item
- Optionally display updated discount in basket prior to checkout using render token
- Can use wildcard instead of entering category codes for the group
- Can exclude a single price group, e.g. Wholesale, from receiving the discount
Feature Details:
Thedefault is to calculate product charges in the specifiedcategory(ies) (including attribute charges) to determinethe subtotal to discount. You canoptionally include non-product charges in the calculation.
In admin, the store owner configures the triggerlevels (number of items needed to activate the discount) and thecorresponding percentage off. The store owner candesignate 1 - 4 trigger levels so that he/she can vary thepercentage discount based on the number bought. Reward thecustomer; the more the customer buys, the higher thediscount percentage.
The storeowner then includes a list of category codes that willbe used in the calculation. Use this module forcategory-wide or store-wide discounts.
The discount amount willappear during checkout on the screen after the customer hasentered their shipping method. This allows Merchant toinclude (optionally) any miscellaneous fees or coupons redeemedon the Shipping - Payment selection screen so the subtotal willbe adjusted before the discount.
In admin you can setup eight separate groups withtheir own four-tiered discount and categories. Hence, if you want to discountone category of products with one set of rules (levels) and another categorywith a different set of rules, you can do this. Multiple categories can beassigned to each group. As the basket is scanned, the quantities are subtotaledfor each group. The discount is applied based on each group's rules, then summedtogether at checkout. You can optionally display the updated discounts prior to checkout in the regular basket screen, recalculatingand updating discounts based on changing basket contents.
In admin, you can chooseone price group, e.g. Wholesale, which is not eligible for the discount since theypresumably already benefit from significantly lower prices.
You can use the asterisk(*) to replace the category codes. When the module encounters the asterisk instead ofcategory codes, it considers all further products eligible. As example, the asterisk inthe first group would make all products in the store eligible for the discount. On the other hand,category codes in the first group would apply the first group rules to those categories.Then if there is an asterisk in the second group, all other products in the store woulduse those discount rules.The module currently fully supports the mivasql configuration of MIVA Merchant 5. It also supports MySQL as long as load balancing has the data stored on the single MySQL server. This would be the case in most of the server setups. For those that are not, we are in the process of converting the code for that remaining, very small group of MIVA Merchant stores. At this time we have not had a problem. Modules will be moved to the top of the queue as needed. Price: $27.50 Upgrade Cost: $0
Upgrade Terms (If Any): N/A
Compatibility: N/A Versions:
5.x+
Other Module Compatibility: N/A From: Discount Modules / Category Specific Discount Modules
Relevance: 32.60%% Rating: (0) Votes: (0) Hits: (813) Reviews:
Rate It - Review It - Modify It - Report It Bookmark Percent Off Based on Quantity by Category v5
<-- Just click this link and then add to your favorites! Back to Top
Take master control of your Product Attributes. This module is packed with features like menu-driven control of MIVA Merchant product attributes. You can control field attributes, prompt/image locations and options, multi-column radio attribute options, and much more. Module features are configurable using the menu-driven admin interface, Product Display Layout, Missing Attributes PATR Page, OUS1 Checkout: Upsell Product (Single) Page and UATR Upsell: Missing Product Attributes (Single) Page templates. These templates are automatically created using your current template versions, when the module is initially installed. Attributes can also be displayed on other product related pages. This gives you master control over the look and feel of your product attributes. The ADS Attribute Master Module Features: - Simple Module Installation and Configuration
- Automatic installation and assignment of PROD, PATR, OUS1 and UATR pages with required item.
- Automatic installation and assignment of revised Product Display Layout, Missing Product Attributes, Checkout: Upsell Product (Single) and Upsell: Missing Product Attributes (Single) templates. Current version history templates are used to generate revised templates. Previous template versions will be available through version history.
- Menu-driven control of new features. No template editing is required, but is available for advanced users. HTML and template scripting knowledge is required to make template modifications. If you do not have these skills it is recommended you contact ADS representative to get assistance with template design and customization.
- Radio Button Control Features:
- Extra Tag Attributes
- Attribute Image/Prompt Location
- Attribute Image/Prompt Style Wrapper using provided token
- Options Image/Label Location
- Option Image/Label Style Wrapper using provided tokens
- Display Option Price Adder when applicable
- Table/Style Attributes
- Number of Option Columns
- Drop-Down List Control Features
- Adds <Select One> at the top of the list
- Extra Tag Attributes
- Image/Prompt Location
- Display Option Price Adder when applicable
- Image/Prompt Style Wrapper using provided token
- Checkbox Control Features
- Extra Tag Attributes
- Image/Prompt Location
- Image/Prompt Style Wrapper using provided tokens
- Display Attribute Price Adder when applicable
- Text Field Control Features
- Size Attribute
- Extra Tag Attributes
- Image/Prompt Location
- Image/Prompt Style Wrapper using provided token
- Display Attribute Price Adder when applicable
- Text Area Field Control Features
- Cols Attribute
- Rows Attribute
- Extra Tag Attributes
- Image/Prompt Location
- Image/Prompt Style Wrapper using provided token
- Display Attribute Price Adder when applicable
Module installation and functionality has the following requirements: - MIVA Merchant Version 5.0
- Settings and control this module provides are used in conjunction with Item "ads-attrmaster", Product Display Layout, Missing Attributes PATR Page, OUS1 Checkout: Upsell Product (Single) Page and UATR Upsell: Missing Product Attributes (Single) Page templates that are pre-installed and configuredwith this module.
- Original templates and/or Merchant "Original" templates will not be modified by this module and can be restored, using the new Version history features, at any time.
- No template editing is required, but is available for advanced users. HTML and template scripting knowledge is required to make template modifications. If you do not have these skills it is recommended you contact ADS representative to get assistance with template design and customization.
Price: $79 Upgrade Cost: $0
Upgrade Terms (If Any): N/A
Compatibility: N/A Versions:
5.x+
Other Module Compatibility: N/A From: Attributes Modules / Enhanced Attributes Display Modules
Relevance: 24.34%%  Rating: (0) Votes: (0) Hits: (1275) Reviews:
Rate It - Review It - Modify It - Report It Bookmark Attribute Master v5
<-- Just click this link and then add to your favorites! Back to Top
The Upload File Attribute module allows you to collect file attachments from your customers. With this module, you can add an upload file attribute to individual products so the product can accept attachments from the customer. Your customers can then add attachments to their order when they select that product for purchase, and the store administrator can easily access the attachment in the Miva admin.
Key Benefits - Allow your customers to add attachments to products in their order
- Customers can add multiple attachments to the same product in the order
- Store Administrator controls the file type and file size permitted for upload
- Store Administrator can easily access the attached files through the Miva admin
Example UsageA storefront owner sells cakes online and wants to create a new product line. He wants to sell birthday cakes with a picture of the person celebrating their birthday on the cake. He has an artist on staff who can re-create a photo on a cake using icing! Now, he needs to allow customers to select the cake they want and let them upload a photo of the person celebrating his/her birthday.
Solution: The Upload File Attributes product allows the storefront owner to create attributes for products so customers can upload a file to add as an attachment to the product they are purchasing. The Upload File Attribute behaves as a standard attribute, so the storefront owner can even add an additional fee for the customized birthday cake to help him cover the cost of the artwork. The customer sees the name of the file they have uploaded in their basket as an attribute and on their invoice, so they can rest assured the upload succeeded. The storefront owner also sees the uploaded file as an attribute to the product on the order notification he receives, so he knows to look for the file in that order’s folder. The storefront owner has found his customers really like having customized cakes using their own photos and are keeping his artist very busy to keep up with their orders!
Product Requirements:
Miva Merchant: v4.00 - v4.13
- OpenUI: v4.9*
- Customized MMUI**
Miva Merchant: v4.14+
- MMUI+DynamicTemplates: 4.53
- OpenUI: v4.9+
*For uncompiled OpenUI stores, this module requires that the Admin Extensions of OpenUI are installed.
**Use of this module in an MMUI store without the DynamicTemplate Engine (which requires Miva Merchant 4.14+) is not supported. Copernicus does not supply MMUI modification instructions, though we can refer you to a Copernicus Customization Partner for professional assistance if you wish to have your MMUI custom modified. Please refer to the Feature Matrix in the product manual for further information.
For installation/upgrade services, please contact Copernicus
Try this product out for FREE on Miva Mia -- send a request to sales@cbstech.com for your free product distribution for use on Miva Mia. Be sure to let us know if you need an uncompiled or compiled version of the module. For more information about Miva Mia, available for FREE download from Miva Corporation, please visit: http://www.miva.com/products/mia/
[Marketing Brief] [Product Manual]Price: $149.95 Upgrade Cost: $74.95
Upgrade Terms (If Any): N/A
Compatibility: MMUI/OpenUI Versions:
4.x, 4.14-4.23x (Available Compiled All 4.x Versions)
Other Module Compatibility: N/A From: Attributes Modules
Relevance: 15.04%%  Rating: (10.00) Votes: (1) Hits: (1739) Reviews:
Rate It - Review It - Modify It - Report It Bookmark Upload File Attribute
<-- Just click this link and then add to your favorites! Back to Top
Our Flatfile Attribute Import Module allows you to import all of your product attributes at once. After creating a flatfile of all product codes and the attribute parameters (created in a database or spreadsheet program then converted to delimited text), this module will allow you to import that file and assign all corresponding products with the appropriate attributes. This module is very easy to use, you don't even need to ftp the attribute file. The module includes an intuitive admin interface, allowing you to upload the file from your local computer. Price: $68.95 Upgrade Cost: $0
Upgrade Terms (If Any): Terms
Compatibility: MMUI/OpenUI Versions:
?.x, 4.x, 4.14-4.16x (Available Compiled)
Other Module Compatibility: N/A From: Import Export Modules / Attributes Import and Export Modules
Relevance: 13.42%% Rating: (0.00) Votes: (0) Hits: (1226) Reviews:
Rate It - Review It - Modify It - Report It Bookmark FlatFile Attribute Import/Export
<-- Just click this link and then add to your favorites! Back to Top
Weights for Your Attributes! Add weight values to your attributes and attribute options for accurate shipping calculations. By default, Merchant does not calculate attribute weight values for accurate shipping calculations. This module will extend that added value feature to your store. Now you have the ability to add additional weight values to larger/heavier items. For example, if a store sold wheels with different sizes, the store administrator could specify 17in wheels to be 25lbs each and 18in wheels to be 30lbs each. The traditional version of this module utilizes the cost field of your attributes for adding the weight value. The Pro version of Attribute Weights frees up your Attribute/Option cost fields by creating a new tab within your merchant panel for adding the weight values. Included with the Pro version is a Import and Export module. 
Price: $79.95 Upgrade Cost: $34.95
Upgrade Terms (If Any): N/A
Compatibility: MMUI/OpenUI Versions:
4.x, 4.14-4.23x (Available Compiled All 4.x Versions)
Other Module Compatibility: N/A From: Attributes Modules
Relevance: 13.27%% Rating: (0.00) Votes: (0) Hits: (1494) Reviews: (1)
Rate It - Review It - Modify It - Report It Bookmark Attribute Weight Pro
<-- Just click this link and then add to your favorites! Back to Top
The Order Attribute module allows you to collect additional information from your customers as they check out of your store. You can add standard Miva Merchant attributes (including extra fees!) to the Customer Account Screen. The collected information is available to your customer on his invoice and to you on the processed order. This is a great module for the gift-giving season as attributes for giftwrap and card text can be added to the checkout process.
Key Benefits:
- Add Miva Merchant Attributes to the Customer Account Screen
- All of the standard functionality of these Attributes are available to you including setting a price for an attribute
- Attributes are for the entire order rather than each product in the order
- Order Attribute Information is available to the customer and the storeowner
- Order Attributes chosen by the customer are viewed on the customer invoice
- Order Attributes chosen by the customer are viewed on the processed order
Example Usage:
A storefront owner sells cakes online and wants to allow his customers to send a gift message when they send a cake to a friend. He needs a way to collect the gift message for the order from the customer.
Solution: The Order Attribute module allows the storefront owner to create an attribute for the order as a whole, so he can collect extra information for the order such as a gift card message the customer would like to send to the person they are sending the cake to. The customer includes this additional information as they are checking out, and can see what they have submitted on their order invoice. The storefront owner can see the information provided by the customer on the merchant notification he receives for the order, and in the Open Orders section for that basket. The storefront owner has found his customers really like being able to include a gift message with their order and they are now regularly sending his cakes to their friends!
Please note that this module collects information for the order and does not provide these attributes for each item in the order.
For installation/upgrade services, please contact Copernicus.
[Marketing Brief] [Product Manual]
Price: $99.95 Upgrade Cost: $49.95
Upgrade Terms (If Any): N/A
Compatibility: OpenUI Versions:
4.x, 4.14-4.23x (Available Compiled All 4.x Versions)
Other Module Compatibility: N/A From: Addendum Additional Info Modules
Relevance: 11.80%% Rating: (10.00) Votes: (0) Hits: (1932) Reviews:
Rate It - Review It - Modify It - Report It Bookmark Order Attributes
<-- Just click this link and then add to your favorites! Back to Top
|
